Correlation of microstructure and charpy impact properties in API X70 and X80 line-pipe steels

This study aims at correlating microstructure and Charpy impact properties in high-toughness API X70 and X80 line-pipe steels. Three kinds of steels were fabricated by varying alloying elements and hot rolling conditions, and their microstructures and Charpy impact properties were investigated. In addition, their effective grain sizes were characterized by the electron back-scatter diffraction (EBSD) analysis. The Charpy impact test results indicated that the steels rolled in the single phase region had the higher upper shelf energy (USE) than the steel rolled in the two phase region because their microstructures were composed of acicular ferrites. In the X80 steel rolled in the single phase region, the decreased energy transition temperature (ETT) could be explained by the decrease in the overall effective grain size due to the presence of acicular ferrite having smaller effective grain size. Thus, it had excellent mechanical properties in yield and tensile strengths, absorbed energy, and transition temperature, except in ductility.

[1]  D. Curry.  Cleavage micromechanisms of crack extension in steels , 1980 .

[2]  D. M. Kim,et al.  The effect of retained austenite stability on high speed deformation behavior of TRIP steels , 2006 .

[3]  E. Heier,et al.  Drop Weight Tear Testing of High Toughness Pipeline Material , 2004 .

[4]  Y. Tomota,et al.  Structure and mechanical behavior of heavily drawn pearlite and martensite in a high carbon steel , 2005 .

[5]  M. Díaz-Fuentes,et al.  Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction. Study of their toughness behavior , 2003 .

[6]  George Krauss,et al.  Ferritic Microstructures in Continuously Cooled Low- and Ultralow-carbon Steels , 1995 .

[7]  Byoungchul Hwang,et al.  Analysis of abnormal fracture occurring during drop-weight tear test of high-toughness line-pipe steel , 2004 .

[8]  W. A. Maxey,et al.  Use of the DWTT Energy for Predicting Ductile Fracture Behavior in Controlled-Rolled Steel Line Pipes , 1980 .

[9]  Sunghak Lee,et al.  Effective grain size and charpy impact properties of high-toughness X70 pipeline steels , 2005 .

[10]  N. Okumura.  Cleavage fracture of low carbon ferritic steels with fine grain size , 1983 .

[11]  S. K. Kim,et al.  Effect of microstructure on the yield ratio and low temperature toughness of linepipe steels , 2002 .

[12]  W. Oldfield,et al.  Curve fitting impact test data: a statistical procedure , 1975 .

[13]  G. Mannucci,et al.  Fracture properties of API X 100 gas pipeline steels , 2002 .

[14]  D. B. Lee,et al.  Characterization of oxide scales formed on low carbon steel between 1100 and 1250 °C in air , 2005 .

[15]  David J. Horsley,et al.  Background to the use of CTOA for prediction of dynamic ductile fracture arrest in pipelines , 2003 .

[16]  John G. Speer,et al.  A perspective on the morphology of bainite , 1990 .

[17]  Kyu Hwan Oh,et al.  Prediction of forming limit in hydro-mechanical deep drawing of steel sheets using ductile fracture criterion , 2006 .