EXTENSION OF HOMOGENEOUS ANISOTROPIC HARDENING MODEL TO CROSS-LOADING WITH LATENT EFFECTS

Abstract The homogeneous anisotropic hardening (HAH) approach, which captures the Bauschinger effect in metallic materials effectively during load reversal, was extended to cross-loading cases with latent hardening effects. This continuum approach is based on the physical understanding of dislocation structure evolution during strain path changes but does not include the concept of kinematic hardening. The model was well validated for a deep drawing quality sheet sample. However, for a dual-phase steel, differences between predicted and experimental results were observed and discussed. Based on these results, additional validation tests and further improvement in the approach were suggested.

[1]  M. Berveiller,et al.  Role of intragranular microstructure development in the macroscopic behavior of multiphase steels in the context of changing strain paths , 2009 .

[2]  Fusahito Yoshida,et al.  Material Models for Accurate Simulation of Sheet Metal Forming and Springback , 2010 .

[3]  Frédéric Barlat,et al.  Stress integration schemes for novel homogeneous anisotropic hardening model , 2012 .

[4]  P. Houtte,et al.  A crystal plasticity model for strain-path changes in metals , 2008 .

[5]  Frédéric Barlat,et al.  Strain hardening response and modeling of EDDQ and DP780 steel sheet under non-linear strain path , 2013 .

[6]  F. Barlat,et al.  Plane stress yield function for aluminum alloy sheets—part 1: theory , 2003 .

[7]  F. Barlat,et al.  Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction , 2012 .

[8]  U. F. Kocks.  A statistical theory of flow stress and work-hardening , 1966 .

[9]  B. Bacroix,et al.  Texture and dislocation structures observation in a dual-phase steel under strain-path changes at large deformation , 2005 .

[10]  Luís Menezes,et al.  Study on the influence of work-hardening modeling in springback prediction , 2007 .

[11]  S. Reese,et al.  Anisotropic finite elastoplasticity with nonlinear kinematic and isotropic hardening and application to sheet metal forming , 2010 .

[12]  J. Raphanel,et al.  Effect of a prestrain on the subsequent yielding of low carbon steel sheets: experiments and simulations , 1986 .

[13]  Frédéric Barlat,et al.  An alternative to kinematic hardening in classical plasticity , 2011 .

[14]  Frédéric Barlat,et al.  Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample , 2003 .

[15]  Fusahito Yoshida,et al.  A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation , 2002 .

[16]  Fusahito Yoshida,et al.  Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain , 2002 .

[17]  Bart Peeters,et al.  Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress–strain behaviour of an IF steel during two-stage strain paths , 2001 .

[18]  Mihaela Banu,et al.  Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: Modelling, numerical analysis and identification , 2006 .

[19]  Frédéric Barlat,et al.  An application of homogeneous anisotropic hardening to springback prediction in pre-strained U-draw/bending , 2012 .

[20]  B. Peeters,et al.  A crystal plasticity based work-hardening/softening model for b.c.c. metals under changing strain paths , 2000 .

[21]  J. Raphanel,et al.  A parameter for measuring the magnitude of a change of strain path: Validation and comparison with experiments on low carbon steel , 1994 .

[22]  Odd Sture Hopperstad,et al.  An evaluation of a combined isotropic-kinematic hardening model for representation of complex strain-path changes in dual-phase steel , 2009 .

[23]  F. Barlat,et al.  A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels , 2013 .

[24]  I. Beyerlein,et al.  Application of a substructure-based hardening model to copper under loading path changes , 2004 .

[25]  R. E. Dick,et al.  Plane stress yield functions for aluminum alloy sheets , 2002 .

[26]  Albert Van Bael,et al.  Finite element modeling of plastic anisotropy induced by texture and strain-path change , 2003 .

[27]  Frédéric Barlat,et al.  Modelling the plastic behaviour of metals under complex loading conditions , 2011 .

[28]  K. H. Kim,et al.  Evolution of anisotropy under plane stress , 1997 .

[29]  S. Bouvier,et al.  Correlation between the macroscopic behavior and the microstructural evolutions during large plastic deformation of a dual-phase steel , 2005 .

[30]  J. Gracio,et al.  Plastic behaviour of copper sheets during sequential tension tests , 1991 .

[31]  H. Takahashi,et al.  Backlash model for large deformation behavior of aluminum under torsional cyclic loading , 1991 .

[32]  F. Barlat,et al.  A comparison of the mechanical behaviour of an AA1050 and a low carbon steel deformed upon strain reversal , 2005 .

[33]  Kwansoo Chung,et al.  A practical two-surface plasticity model and its application to spring-back prediction , 2007 .

[34]  I. Beyerlein,et al.  Modeling transients in the mechanical response of copper due to strain path changes , 2007 .

[35]  Jean-Louis Chaboche,et al.  A review of some plasticity and viscoplasticity constitutive theories , 2008 .

[36]  Kwansoo Chung,et al.  Spring-back evaluation of automotive sheets based on isotropic–kinematic hardening laws and non-quadratic anisotropic yield functions, part III: applications , 2005 .

[37]  Fusahito Yoshida,et al.  A model of large-strain cyclic plasticity and its application to springback simulation , 2003 .

[38]  Akitake Makinouchi,et al.  Simulation of springback and wrinkling in stamping of a dual phase steel rail-shaped part , 2006 .

[39]  Frédéric Barlat,et al.  Work-hardening model for polycrystalline metals under strain reversal at large strains , 2007 .

[40]  Magnus Langseth,et al.  Elastic-plastic behaviour of dual-phase, high-strength steel under strain-path changes , 2008 .

[41]  Bart Peeters,et al.  Work-hardening/softening behaviour of B.C.C. polycrystals during changing strain paths: II. TEM observations of dislocation sheets in an if steel during two-stage strain paths and their representation in terms of dislocation densities , 2001 .