Spindle speed variation and adaptive force regulation to suppress regenerative chatter in the turning process

[1]  Gilles Dessein,et al.  SUPPRESSION OF PERIOD DOUBLING CHATTER IN HIGH-SPEED MILLING BY SPINDLE SPEED VARIATION , 2011 .

[2]  Gholamreza Vossoughi,et al.  Sliding Mode Control of Machining Chatter in the Presence of Tool Wear and Parametric Uncertainties , 2010 .

[3]  Hamed Moradi,et al.  Robust control strategy for suppression of regenerative chatter in turning , 2009 .

[4]  Hamed Moradi,et al.  Tuneable vibration absorber design to suppress vibrations: An application in boring manufacturing process , 2008 .

[5]  Gilles Dessein,et al.  Toolpath dependent stability lobes for the milling of thin-walled parts , 2008 .

[6]  Gábor Stépán,et al.  Stability Analysis of Turning With Periodic Spindle Speed Modulation Via Semidiscretization , 2004 .

[7]  Soo Hun Lee,et al.  Programming spindle speed variation for machine tool chatter suppression , 2003 .

[8]  Jian Wang,et al.  Two DOF modeling with three-dimensional forces and robust chatter control in metal cutting by piezo-actuator , 2003, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003).

[9]  E. Liasi,et al.  Surface Finish Enhancement in a Turning Operation via Adaptive STR Control of the Depth of Cut , 2003 .

[10]  Erhan Budak,et al.  An analytical design method for milling cutters with nonconstant pitch to increase stability, Part I: Theory , 2003 .

[11]  Jon R. Pratt,et al.  Stability Prediction for Low Radial Immersion Milling , 2002 .

[12]  Richard E. DeVor,et al.  Nonlinear influence of effective lead angle in turning process stability , 2002 .

[13]  Min-Yang Yang,et al.  A Study on the Relationships Between Static/Dynamic Cutting Force Components and Tool Wear , 2001 .

[14]  F. Moon,et al.  Nonlinear models for complex dynamics in cutting materials , 2001, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[15]  Ali H. Nayfeh,et al.  Chatter control and stability analysis of a cantilever boring bar under regenerative cutting conditions , 2001, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[16]  M. S. Fofana,et al.  Nonlinear regenerative chatter in turning , 2001 .

[17]  Alpay Yilmaz,et al.  Machine-Tool Chatter Suppression by Multi-Level Random Spindle Speed Variation , 1999, Manufacturing Science and Engineering.

[18]  Frédéric Rotella,et al.  Delta approach robust controller for constant turning force regulation , 1998 .

[19]  Jongwon Kim,et al.  Sliding mode cutting force regulator for turning processes , 1998 .

[20]  Steven Y. Liang,et al.  Chatter stability of a slender cutting tool in turning with tool wear effect , 1998 .

[21]  Richard E. DeVor,et al.  An Investigation of Variable Spindle Speed Face Milling for Tool-Work Structures With Complex Dynamics, Part 1: Simulation Results , 1997 .

[22]  Fathy Ismail,et al.  Chatter suppression by adaptive speed modulation , 1997 .

[23]  Tsu-Chin Tsao,et al.  A new approach to stability analysis of variable speed machining systems , 1993 .

[24]  T. Delio,et al.  Sensor-Based Chatter Detection and Avoidance by Spindle Speed Selection , 1992 .

[25]  Etsuo Marui,et al.  Chatter Vibration of Lathe Tools. Part 2: On the Mechanism of Exciting Energy Supply , 1983 .

[26]  B. J. Stone,et al.  An Investigation of the Transient Effects during Variable Speed Cutting , 1980 .

[27]  A. F. D’Souza,et al.  Metal Cutting Dynamics With Reference to Primary Chatter , 1976 .

[28]  G. J. DeSalvo,et al.  On the Plastic Flow Beneath a Blunt Axisymmetric Indenter , 1970 .

[29]  H. E. Merritt.  Theory of Self-Excited Machine-Tool Chatter: Contribution to Machine-Tool Chatter Research—1 , 1965 .

[30]  Chun-Yi Su,et al.  Modeling and robust adaptive control of metal cutting mechanical systems , 2001, Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148).

[31]  Haiyan Henry Zhang,et al.  Chatter modeling, analysis and control for CNC machining systems. , 1996 .

[32]  Y. S. Tarng,et al.  Automatic selection of spindle speed for suppression of regenerative chatter in turning , 1996 .

[33]  Lars Harder,et al.  Stochastic Modelling and Online Adaptive Control of Cutting Forces in Turning , 1994 .

[34]  S. Smith,et al.  Stabilizing chatter by automatic spindle speed regulation , 1992 .

[35]  Weiping Li,et al.  Applied Nonlinear Control , 1991 .

[36]  J. Tlusty,et al.  Basic Non-Linearity in Machining Chatter , 1981 .