Reliability of power MOSFET-based smart switches under normal and extreme conditions for 24 V battery system applications

This study aims to assess the reliability of smart converters for applications using 24 V batteries. It compares degradation effects and lifetime durations for similar dissipated energies when these smart power switches are subjected to normal and extreme protection test conditions. Three experimental ageing tests have been performed: (i) ageing tests under normal protection mode, (ii) ageing tests under repetitive inductive avalanche switching and (iii) ageing tests under repetitive short-circuit. Evolution of several electrical parameters such as on-state resistance; threshold voltage and saturation current have been monitored. Tested devices under normal condition and under repetitive inductive avalanche have failed after about the same number of cycles with the same dissipated energy. However, several results show a significant decrease of the lifetime under repetitive short-circuit tests for a similar dissipated energy.

[1]  Andrea Irace,et al.  Reliability enhancement with the aid of transient infrared thermal analysis of smart Power MOSFETs during short circuit operation , 2005, Microelectron. Reliab..

[2]  N. Soin,et al.  Measurement and characterization of hot carrier safe operating area (HCI-SOA) in 24V n-type lateral DMOS transistors , 2012, 2012 10th IEEE International Conference on Semiconductor Electronics (ICSE).

[3]  Philippe Dupuy,et al.  Innovative Methodology for Predictive Reliability of Intelligent Power Devices Using Extreme Electro-thermal Fatigue , 2005, Microelectron. Reliab..

[4]  Jean-Marie Dorkel,et al.  Source electrode evolution of a low voltage power MOSFET under avalanche cycling , 2009, Microelectron. Reliab..

[5]  S. Lefebvre,et al.  Experimental behavior of single-chip IGBT and COOLMOS devices under repetitive short-circuit conditions , 2005, IEEE Transactions on Electron Devices.

[6]  Vladimír Kosel,et al.  Flexible active cycle stress testing of smart power switches , 2007, Microelectron. Reliab..

[7]  Mauro Ciappa,et al.  Selected failure mechanisms of modern power modules , 2002, Microelectron. Reliab..

[8]  M. Glavanovics,et al.  Impact of thermal overload operation on wirebond and metallization reliability in smart power devices , 2004, Proceedings of the 30th European Solid-State Circuits Conference (IEEE Cat. No.04EX850).

[9]  Leo Lorenz.  Fast switching power semiconductor devices and Smart Power IC´s: An enabling technology for future high efficient electronic system , 2010, Proceedings of 2010 International Symposium on VLSI Technology, System and Application.