Human posture simulation to assess cumulative spinal load due to manual lifting. Part I: methods

The estimation of cumulative spinal load (CSL) resulting from exposure to manual materials handling (MMH) may provide a sensitive method for assessing the risk of highly varying exposures. This article reports on a CSL method that involves human posture simulation of workers from videotape in order to assess spinal load exposures due to MMH. The proposed method appears to be sensitive to different durations of exposure, easy to use and useful for assessing jobs with a high degree of variability in task characteristics between lifts. Although the method remains to be validated, it appears to be a useful addition to the range of tools available for assessing manual lifting exposures in worksite-based epidemiologic studies. Ergonomic methods are lacking for assessing highly variable MMH tasks, such as tasks found in warehousing. The existing methods do not include sufficient factors to account for variable exposure patterns or tasks with highly variable task characteristics, such as varying load weights and lift geometries. The CSL assessment method described in this article may provide a way to evaluate these types of tasks in order to assess the overall risk of workers developing work-related musculoskeletal disorders.

[1]  Alwin Luttmann,et al.  Evaluation and assessment of lumbar load during total shifts for occupational manual materials handling jobs within the Dortmund Lumbar Load Study – DOLLY , 2000 .

[2]  Maury Gittleman,et al.  “Flexible” Workplace Practices: Evidence from a Nationally Representative Survey , 1998 .

[3]  W. G. Allread,et al.  The Role of Dynamic Three-Dimensional Trunk Motion in Occupationally-Related Low Back Disorders: The Effects of Workplace Factors, Trunk Position, and Trunk Motion Characteristics on Risk of Injury , 1993, Spine.

[4]  L. Hazzard,et al.  Job rotation cuts cumulative trauma cases , 1992 .

[5]  Kermit Davis,et al.  Ergonomics. Pros and cons of job rotation as a means of reducing injury costs. , 2005, Journal of occupational and environmental hygiene.

[6]  Jack P. Callaghan,et al.  Cumulative spinal loading exposure methods for manual material handling tasks. Part 1: is cumulative spinal loading associated with lower back disorders? , 2006 .

[7]  Waldemar Karwowski,et al.  The Relationships Between Biomechanical and Postural Stresses, Musculoskeletal Injury Rates, and Perceived Body Discomfort Experienced by Industrial Workers: A Field Study , 2002, International journal of occupational safety and ergonomics : JOSE.

[8]  A Seidler,et al.  The role of cumulative physical work load in lumbar spine disease: risk factors for lumbar osteochondrosis and spondylosis associated with chronic complaints , 2001, Occupational and environmental medicine.

[9]  W S Marras,et al.  Biomechanical risk factors for occupationally related low back disorders. , 1995, Ergonomics.

[10]  T. Eriksson,et al.  The Adoption of Job Rotation: Testing the Theories , 2006 .

[11]  Jack P Callaghan,et al.  Inter- and intra-observer reliability of calculating cumulative lumbar spine loads , 2002, Ergonomics.

[12]  R. Norman,et al.  A comparison of peak vs cumulative physical work exposure risk factors for the reporting of low back pain in the automotive industry. , 1998, Clinical biomechanics.

[13]  R. Norman,et al.  Biomechanical analysis of peak and cumulative spinal loads during simulated patient-handling activities: a substudy of a randomized controlled trial to prevent lift and transfer injury of health care workers. , 2001, Applied ergonomics.

[14]  Thomas R. Waters,et al.  Human posture simulation to assess cumulative spinal load due to manual lifting. Part II: accuracy and precision , 2011 .

[15]  A Garg,et al.  Revised NIOSH equation for the design and evaluation of manual lifting tasks. , 1993, Ergonomics.

[16]  J P Callaghan,et al.  Determining the minimum sampling rate needed to accurately quantify cumulative spine loading from digitized video. , 2003, Applied ergonomics.

[17]  A Seidler,et al.  Occupational risk factors for symptomatic lumbar disc herniation; a case-control study , 2003, Occupational and environmental medicine.

[18]  E Occhipinti,et al.  New procedure for assessing sequential manual lifting jobs using the revised NIOSH lifting equation , 2007, Ergonomics.

[19]  Gary A. Mirka,et al.  Continuous Assessment of Back Stress (CABS): A New Method to Quantify Low-Back Stress in Jobs with Variable Biomechanical Demands , 2000, Hum. Factors.

[20]  Thomas J. Miceli,et al.  Job Rotation: Cost, Benefits, and Stylized Facts , 1999 .

[21]  Shrawan Kumar,et al.  Cumulative spinal loading exposure methods for manual material handling tasks. Part 2: methodological issues and applicability for use in epidemiological studies , 2006 .

[22]  R W Norman,et al.  Biomechanical and psychosocial risk factors for low back pain at work. , 2001, American journal of public health.

[23]  H C Kemper,et al.  Job rotation as a factor in reducing physical workload at a refuse collecting department. , 1999, Ergonomics.

[24]  William S. Marras,et al.  The Working Back , 2008 .

[25]  S. Kumar,et al.  Cumulative Load as a Risk Factor for Back Pain , 1990, Spine.

[26]  J P Callaghan,et al.  An evaluation of predictive methods for estimating cumulative spinal loading , 2001, Ergonomics.