Monitoring Wind Turbine Vibration Based on SCADA Data

Three models for detecting abnormalities of wind turbine vibrations reflected in time domain are discussed. The models were derived from the supervisory control and data acquisition (SCADA) data collected at various wind turbines. The vibration of a wind turbine is characterized by two parameters, i.e., drivetrain and tower acceleration. An unsupervised data-mining algorithm, the k-means clustering algorithm, was applied to develop the first monitoring model. The other two monitoring models for detecting abnormal values of drivetrain and tower acceleration were developed by using the concept of a control chart. SCADA vibration data sampled at 10 s intervals reflects normal and faulty status of wind turbines. The performance of the three monitoring models for detecting abnormalities of wind turbines reflected in vibration data of time domain was validated with the SCADA industrial data.

[1]  J. Friedman Greedy function approximation: A gradient boosting machine. , 2001 .

[2]  Miloslav Suchánek,et al.  Multivariate control charts: Control charts for calibration curves , 1994 .

[3]  Fred Spiring,et al.  Introduction to Statistical Quality Control , 2007, Technometrics.

[4]  Josef Kittler,et al.  Pattern recognition : a statistical approach , 1982 .

[5]  A. Kusiak,et al.  Virtual Models for Prediction of Wind Turbine Parameters , 2010, IEEE Transactions on Energy Conversion.

[7]  Trevor Darrell,et al.  Nearest-Neighbor Methods in Learning and Vision , 2008, IEEE Trans. Neural Networks.

[8]  Murray Smith,et al.  Neural Networks for Statistical Modeling , 1993 .

[9]  Roger M. Sauter,et al.  Introduction to Statistical Quality Control (2nd ed.) , 1992 .

[10]  Andrew Kusiak,et al.  Models for monitoring wind farm power , 2009 .

[11]  Shuzhi Sam Ge,et al.  Nonlinear identi cation and control — a neural network approach , 2022 .

[12]  Hava T. Siegelmann,et al.  Analog computation via neural networks , 1993, [1993] The 2nd Israel Symposium on Theory and Computing Systems.

[13]  Daniel T. Larose,et al.  Discovering Knowledge in Data: An Introduction to Data Mining , 2005 .

[14]  Harvey M. Wagner,et al.  Global Sensitivity Analysis , 1995, Oper. Res..

[15]  Jochen Giebhardt,et al.  Rotor Condition Monitoring for Improved Operational Safety of Offshore Wind Energy Converters , 2005 .

[16]  Leo Breiman,et al.  Random Forests , 2001, Machine Learning.

[17]  Ingrid Daubechies,et al.  Ten Lectures on Wavelets , 1992 .

[18]  Andrew Kusiak,et al.  Virtual models of indoor-air-quality sensors , 2010 .

[19]  Frederick Mosteller,et al.  A $k$-Sample Slippage Test for an Extreme Population , 1948 .

[20]  Lan Kang,et al.  On-Line Monitoring When the Process Yields a Linear Profile , 2000 .

[21]  Peter Tavner,et al.  Condition monitoring and fault diagnosis of a wind turbine synchronous generator drive train , 2009 .

[22]  Sung-Hoon Ahn,et al.  Practical aspects of a condition monitoring system for a wind turbine with emphasis on its design, system architecture, testing and installation , 2010 .

[23]  Oleksandr Makeyev,et al.  Neural network with ensembles , 2010, The 2010 International Joint Conference on Neural Networks (IJCNN).

[24]  Mei Kobayashi,et al.  Wavelets and their applications : case studies , 1998 .

[25]  อนิรุธ สืบสิงห์,et al.  Data Mining Practical Machine Learning Tools and Techniques , 2014 .

[26]  Wei-Yin Loh,et al.  Classification and regression trees , 2011, WIREs Data Mining Knowl. Discov..

[27]  Ron Kohavi,et al.  Wrappers for Feature Subset Selection , 1997, Artif. Intell..

[28]  G.P. Liu,et al.  Nonlinear Identification and Control: A Neural Network Approach [Book Review] , 2002, IEEE Control Systems.

[29]  Andreas Christmann,et al.  Support vector machines , 2008, Data Mining and Knowledge Discovery Handbook.

[30]  Jean-Michel Poggi,et al.  Wavelets and their applications , 2007 .

[31]  Shinichi Morishita,et al.  On Classification and Regression , 1998, Discovery Science.

[32]  L. Bertling,et al.  Maintenance Management of Wind Power Systems Using Condition Monitoring Systems—Life Cycle Cost Analysis for Two Case Studies , 2007, IEEE Transactions on Energy Conversion.

[33]  J. Friedman Stochastic gradient boosting , 2002 .

[34]  Douglas C. Montgomery,et al.  Using Control Charts to Monitor Process and Product Quality Profiles , 2004 .

[35]  Thomas Rbement,et al.  Fundamentals of quality control and improvement , 1993 .

[36]  R Kahavi,et al.  Wrapper for feature subset selection , 1997 .

[37]  Saltelli Andrea,et al.  Global Sensitivity Analysis: The Primer , 2008 .

[38]  Xiaobo Zhou,et al.  Global Sensitivity Analysis , 2017, Encyclopedia of GIS.

[39]  E. J. Wiggelinkhuizen,et al.  Assessment of Condition Monitoring Techniques for Offshore Wind Farms , 2008 .

[40]  F. Gianfelici,et al.  Nearest-Neighbor Methods in Learning and Vision (Shakhnarovich, G. et al., Eds.; 2006) [Book review] , 2008 .

[41]  Christopher M. Bishop,et al.  Classification and regression , 1997 .

[42]  V. A. Nechitailo,et al.  Wavelets and their uses , 2001 .

[43]  Yuan Yan Tang,et al.  Wavelet Theory and Its Application to Pattern Recognition , 2000, Series in Machine Perception and Artificial Intelligence.

[44]  Mohammed Kishk,et al.  The Selection of a Suitable Maintenance Strategy for Wind Turbines , 2006 .