Antibacterial effect of surface-functionalized polypropylene hollow fiber membrane from surface-initiated atom transfer radical polymerization

Abstract Microporous polypropylene (PP) hollow fiber (PPHF) membranes with surface-grafted block copolymer brushes of poly(ethylene glycol) monomethacrylate (PEGMA) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) (PPHF- g -(PPEGMA- b -PDMAEMA)) were prepared via consecutive surface-initiated atom transfer radical polymerization (ATRP). The effective pore size of the surface modified PPHF membranes could be adjusted by controlling the graft chain length, or the ATRP time. Quaternization of the tertiary amine groups of the PDMAEMA block with 1-bromododecane gave rise to a high concentration of quaternary amine salt (QAS) on the PPHF membrane surface. The antibacterial effect of the quaternized PPHF- g -(PPEGMA- b -PDMAEMA) membrane was assayed with Escherichia coli ( E. coli , a Gram-negative bacterium) and Staphylococcus aureus ( S. aureus , a Gram-positive bacterium) cultures. In addition to bactericidal properties, the functionalized membrane surface also exhibited anti-fouling effect for bacteria due to the hydrophilic nature of the P(PEGMA) block on the PPHF- g -(PPEGMA- b -PDMAEMA) membrane. The permanence of antibacterial effect of the functionalized PPHF membrane was also demonstrated in repeated applications of the quaternized PPHF- g -(P(PEGMA)- b -PDMAEMA) membrane.

[1]  Zhi-Kang Xu,et al.  Surface modification of polypropylene microporous membranes to improve their antifouling property in MBR: NH3 plasma treatment , 2005 .

[2]  K. Neoh,et al.  Antibacterial and antifungal efficacy of surface functionalized polymeric beads in repeated applications. , 2005, Biotechnology and bioengineering.

[3]  S. Denyer.  Mechanisms of action of biocides , 1990 .

[4]  Oluwaseun O. Ogunbiyi,et al.  Methods Employed for Control of Fouling in MF and UF Membranes: A Comprehensive Review , 2005 .

[5]  T. Tani,et al.  Antimicrobial activity of tertiary amine covalently bonded to a polystyrene fiber , 1987, Applied and environmental microbiology.

[6]  Koon Gee Neoh,et al.  Surface Functionalization Technique for Conferring Antibacterial Properties to Polymeric and Cellulosic Surfaces , 2003 .

[7]  A. Chmielewski,et al.  Progress in radiation processing of polymers , 2005 .

[8]  P. Gilbert,et al.  Antimicrobial activity of some alkyltrimethylammonium bromides , 1985 .

[9]  C. H. Lee,et al.  Application of Surface Modified Polypropylene Membranes to an Anaerobic Membrane Bioreactor , 2001, Environmental technology.

[10]  S. Al‐Malaika.  Reactive modifiers for polymers , 1997 .

[11]  Simon Judd,et al.  Membrane Fouling in Membrane Bioreactors for Wastewater Treatment , 2002 .

[12]  K. Matyjaszewski,et al.  Synthesis of Polymer Brushes Using Atom Transfer Radical Polymerization , 2003 .

[13]  H. Kourai,et al.  Disinfection of Water with Quaternary Ammonium Salts Insolubilized on a Porous Glass Surface , 1984, Applied and environmental microbiology.

[14]  K. Matyjaszewski,et al.  Functional polymers by atom transfer radical polymerization , 2001 .

[15]  J. Bucheńska.  Polyamide fibers (PA6) with antibacterial properties , 1996 .

[16]  T. Tashiro,et al.  ANTIBACTERIAL AND BACTERIUM ADSORBING MACROMOLECULES , 2001 .

[17]  D. Briggs,et al.  High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database , 1992 .

[18]  K. Neoh,et al.  Polymer Microspheres with Permanent Antibacterial Surface from Surface-Initiated Atom Transfer Radical Polymerization , 2005 .

[19]  S. Piletsky,et al.  Comparison of thin-layer and bulk MIPs synthesized by photoinitiated in situ crosslinking polymerization from the same reaction mixtures , 2005 .

[20]  William J. Brittain,et al.  Synthesis of Polymer Brushes on Silicate Substrates via Reversible Addition Fragmentation Chain Transfer Technique , 2002 .

[21]  J. Hubbell,et al.  Surface-immobilized polyethylene oxide for bacterial repellence. , 1992, Biomaterials.

[22]  J. Feijen,et al.  Adhesion of coagulase-negative staphylococci to methacrylate polymers and copolymers. , 1986, Journal of biomedical materials research.

[23]  H. F. Walton.  Principles and methods of chemical analysis , 1964 .

[24]  Zhi‐Kang Xu,et al.  Covalent attachment of phospholipid analogous polymers to modify a polymeric membrane surface: a novel approach. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[25]  K. Matyjaszewski,et al.  Atom transfer radical polymerization. , 2001, Chemical reviews.

[26]  Z. Li,et al.  Surface modification and functionalization through the self-assembled monolayer and graft polymerization. , 2005, Advances in colloid and interface science.

[27]  K. Neoh,et al.  Antibacterial and mechanical properties of bone cement impregnated with chitosan nanoparticles. , 2006, Biomaterials.

[28]  Zhi-Kang Xu,et al.  Surface modification of polypropylene microporous membrane to improve its antifouling property in MBR: CO2 plasma treatment , 2005 .

[29]  Clive Maier,et al.  Polypropylene: The Definitive User's Guide and Databook , 1998 .

[30]  Sung Soo Kim,et al.  Surface modification of polypropylene membrane by low-temperature plasma treatment , 2001 .

[31]  Zhi‐Kang Xu,et al.  Enhancing the hydrophilicity of polypropylene microporous membranes by the grafting of 2-hydroxyethyl methacrylate via a synergistic effect of photoinitiators , 2006 .

[32]  K. Neoh,et al.  Synthesis, characterization and anti-fouling properties of poly(ethylene glycol) grafted poly(vinylidene fluoride) copolymer membranes , 2001 .

[33]  K. Matyjaszewski,et al.  ATOM TRANSFER RADICAL POLYMERIZATION AND THE SYNTHESIS OF POLYMERIC MATERIALS , 1998 .

[34]  C. Alexander,et al.  Bacterial Adhesion at Synthetic Surfaces , 1999, Applied and Environmental Microbiology.

[35]  Krzysztof Matyjaszewski,et al.  Polymers at interfaces : Using atom transfer radical polymerization in the controlled growth of homopolymers and block copolymers from silicon surfaces in the absence of untethered sacrificial initiator , 1999 .

[36]  E. Kang,et al.  Surface Modification of Fluoropolymers via Molecular Design , 2000 .

[37]  J. Bucheńska.  Modified polyacrylonitrile (PAN) fibers , 1997 .

[38]  Dukjoon Kim,et al.  Surface characterization of microporous polypropylene membranes modified by plasma treatment , 2001 .

[39]  K. Choo,et al.  Hydrophilic modification of polypropylene microfiltration membranes by ozone-induced graft polymerization , 2000 .

[40]  H Ma,et al.  Factors affecting membrane fouling reduction by surface modification and backpulsing , 2001 .

[41]  W. Huck,et al.  Polymer brushes via surface-initiated polymerizations. , 2004, Chemical Society reviews.

[42]  Y. Ikada,et al.  Polymer surface with graft chains , 2003 .

[43]  R. Baker.  Membrane Technology and Applications , 1999 .

[44]  D. Shah,et al.  Filtration of Nanoparticles with Dimethyldioctadecylammonium Bromide Treated Microporous Polypropylene Filters , 1997 .