Compact Layout and Bias-Dependent Base-Resistance Modeling for Advanced SiGe HBTs

In this paper, an improved and extended set of physics-based analytical equations for describing the external and internal base resistance of silicon-germanium HBTs as a function of geometry (layout) is presented. The investigated layouts include single- and double-base contacts not only in parallel but also perpendicular to the emitter finger. In addition, via and slot base contacts, a large range of link to internal-base-sheet-resistance ratio, and changes in external base layout dimensions are covered. The new equations are verified using quasi-3-D device simulation and are demonstrated to be applicable to all practically useful emitter aspect ratios.

[1]  D. Widmann,et al.  Current crowding on metal contacts to planar devices , 1969 .

[2]  D.P. Verret,et al.  Two-dimensional effects in the bipolar polysilicon self-aligned transistor , 1987, IEEE Transactions on Electron Devices.

[3]  Michael Schroter,et al.  Simulation and modeling of the low-frequency base resistance of bipolar transistors and its dependence on current and geometry , 1991 .

[4]  Michael Schroter.  Modeling of the low-frequency base resistance of single base contact bipolar transistors , 1992 .

[5]  Gregory G. Freeman,et al.  A scalable, statistical SPICE Gummel-Poon model for SiGe HBTs , 1997, Proceedings of the 1997 Bipolar/BiCMOS Circuits and Technology Meeting.

[6]  Hans-Martin Rein,et al.  Physics- and process-based bipolar transistor modeling for integrated circuit design , 1999, IEEE J. Solid State Circuits.

[7]  Hans-Martin Rein,et al.  A novel transistor model for simulating avalanche-breakdown effects in Si bipolar circuits , 2002 .

[8]  J.C.J. Paasschens.  Compact modeling of the noise of a bipolar transistor under DC and AC current crowding conditions , 2004, IEEE Transactions on Electron Devices.

[9]  P. Chevalier,et al.  Low-cost self-aligned SiGeC HBT module for high-performance bulk and SOI RFCMOS platforms , 2005, IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest..

[10]  K. Kawakyu,et al.  Modification Of Compact Bipolar Transistor Model For DFM (design For Manufacturing) Applications , 2006, Proceedings of the International Conference Mixed Design of Integrated Circuits and System, 2006. MIXDES 2006..

[11]  Michael Schroter,et al.  Improved layout dependent modeling of the base resistance in advanced HBTs , 2008 .