Capacitance sensor for hold-up measurement in high-viscous-oil/conductive-water core-annular flows

[1]  Vittorio Ferrari,et al.  A capacitive sensor system for the analysis of two-phase flows of oil and conductive water , 2010 .

[2]  Prasanta Kumar Das,et al.  Review of oil water core annular flow , 2009 .

[3]  Bruno Bauwens,et al.  Probabilistic mapping of adiabatic horizontal two-phase flow by capacitance signal feature clustering , 2009 .

[4]  Pietro Poesio,et al.  Experimental validation of theoretical models in two-phase high-viscosity ratio liquid–liquid flows in horizontal and slightly inclined pipes , 2008 .

[5]  Barry J. Azzopardi,et al.  Imaging stratifying liquid–liquid flow by capacitance tomography , 2007 .

[6]  C. Vuik,et al.  Core-annular flow through a horizontal pipe: Hydrodynamic counterbalancing of buoyancy force on core , 2007 .

[7]  Leonardo Goldstein,et al.  A non-intrusive probe for bubble profile and velocity measurement in horizontal slug flows , 2005 .

[8]  M. Trela,et al.  Capacitance sensor for void fraction measurement in water/steam flows , 2004 .

[9]  L. Durlofsky,et al.  Experimental study of two and three phase flows in large diameter inclined pipes , 2003 .

[10]  A. Kendoush,et al.  Void fraction measurement by X-ray absorption , 2002 .

[11]  Alessandro Paglianti,et al.  An impedance probe for the measurements of liquid hold-up and mixing time in two/three-phase stirred tank reactors , 2001 .

[12]  Artur J. Jaworski,et al.  The design of an electrical capacitance tomography sensor for use with media of high dielectric permittivity , 2000 .

[13]  David K. Han,et al.  Regular Article: A Shape Decomposition Technique in Electrical Impedance Tomography , 1999 .

[14]  Marco Fossa,et al.  Design and performance of a conductance probe for measuring the liquid fraction in two-phase gas-liquid flows , 1998 .

[15]  E. A. Hammer,et al.  Capacitance sensor design for reducing errors in phase concentration measurements , 1998 .

[16]  K. S. Rezkallah,et al.  Void fraction measurements in gas-liquid flows under 1 - g and μ - g conditions using capacitance sensors , 1997 .

[17]  P. B. Whalley,et al.  Slug flow regime identification from dynamic void fraction measurements in vertical air-water flows , 1997 .

[18]  Dieter Mewes,et al.  Recent developments and industrial/research applications of capacitance tomography , 1996 .

[19]  D. Joseph,et al.  Friction factor and holdup studies for lubricated pipelining—I. Experiments and correlations , 1993 .

[20]  C. Strizzolo,et al.  Capacitance sensors for measurement of phase volume fraction in two-phase pipelines , 1993 .

[21]  Maurice Beck,et al.  Conductivity effects on capacitance measurements of two-component fluids using the charge transfer method , 1988 .

[22]  J. C. Borst,et al.  A CAPACITANCE SENSOR FOR TWO-PHASE VOID FRACTION MEASUREMENT AND FLOW PATTERN IDENTIFICATION , 1988 .

[23]  Maurice Beck,et al.  REVIEW ARTICLE: Electronic transducers for industrial measurement of low value capacitances , 1988 .

[24]  M. Sami A. Abouelwafa,et al.  The Use of Capacitance Sensors for Phase Percentage Determination in Multiphase Pipelines , 1980, IEEE Transactions on Instrumentation and Measurement.

[25]  Arnout Willockx,et al.  Capacitance signal analysis of horizontal two-phase flow in a small diameter tube , 2008 .

[26]  Lihui Peng,et al.  Image reconstruction algorithms for electrical capacitance tomography , 2003 .

[27]  Daniel D. Joseph,et al.  CORE-ANNULAR FLOWS , 1997 .

[28]  R. V. A. Oliemans,et al.  Core-Annular Flow of Oil and Water through a Pipeline , 1986 .

[29]  G. Ooms,et al.  CORE-ANNULAR FLOW OF OIL AND WATER , 1986 .