The effects of different steam-sterilization programs on material properties of poly(L-lactide).

As-polymerized poly(L-lactide) test rods were sterilized by seven different specially designed computer-operated autoclaving programs. As a control, common hospital sterilization was performed. In all cases, the molecular weight decreased after sterilization. A short time high-temperature sterilization led to less molecular weight decrease than a low sterilization temperature cycle with a longer sterilization time. Regular hospital sterilization significantly reduced the elongation at break and also resulted in a decrease of 35% in tensile strength. The program causing minimal damage to the material properties was studied in detail. This program, with a sterilization period of 60 s and 129 degrees C, was effective for PLLA sterilization and also looks very promising for sterilization of other thermo- and moisture-labile polymers.

[1]  V. Handlos.  Kinetics of the aeration of ethylene-oxide sterilized plastics. , 1980, Biomaterials.

[2]  Albert J. Pennings,et al.  SYNTHESIS OF HIGH-MOLECULAR-WEIGHT POLY(L-LACTIDE) INITIATED WITH TIN 2-ETHYLHEXANOATE , 1987 .

[3]  J. Whitbourne,et al.  Determination of ethylene oxide in surgical materials by vacuum extraction and gas chromatography. , 1971, Journal of pharmaceutical sciences.

[4]  C Hogstedt,et al.  Leukemia in workers exposed to ethylene oxide. , 1979, JAMA.

[5]  Ross R. Muth,et al.  Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1 , 1979 .

[6]  C. Sheu,et al.  Heritable translocation and dominant-lethal mutation induction with ethylene oxide in mice. , 1980, Mutation research.

[7]  P J Landrigan,et al.  Ethylene oxide: an overview of toxicologic and epidemiologic research. , 1984, American journal of industrial medicine.

[8]  A. Pennings,et al.  Bio-absorbable plates and screws for internal fixation of mandibular fractures. A study in six dogs. , 1989, International journal of oral and maxillofacial surgery.

[9]  Mool C. Gupta,et al.  Radiation effects on poly(lactic acid) , 1983 .

[10]  N. Gopal.  Radiation sterilization of pharmaceuticals and polymers , 1978 .

[11]  David F. Williams,et al.  Effects of enzymes and gamma irradiation on the tensile strength and morphology of poly(p‐dioxanone) fibers , 1984 .

[12]  G. Boering,et al.  Resorbable materials of poly(L-lactide). VI. Plates and screws for internal fracture fixation. , 1987, Biomaterials.

[13]  G. Boering,et al.  Resorbable poly(L-lactide) plates and screws for the fixation of zygomatic fractures. , 1987, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[14]  R. B. Roberts,et al.  Hazards of Ethylene Oxide Sterilization , 1969 .

[15]  C S Weil,et al.  A two-year inhalation study of the carcinogenic potential of ethylene oxide in Fischer 344 rats. , 1984, Toxicology and applied pharmacology.

[16]  R. Bos,et al.  Degradation of and tissue reaction to biodegradable poly(L-lactide) for use as internal fixation of fractures: a study in rats. , 1991, Biomaterials.

[17]  G L Kimmel,et al.  Aliphatic polyesters II. The degradation of poly (DL-lactide), poly (epsilon-caprolactone), and their copolymers in vivo. , 1981, Biomaterials.

[18]  G. Boering,et al.  Resorbable materials of poly(L-lactide). VII. In vivo and in vitro degradation. , 1987, Biomaterials.

[19]  A. Schindler,et al.  Sustained drug delivery systems II: Factors affecting release rates from poly(epsilon-caprolactone) and related biodegradable polyesters. , 1979, Journal of pharmaceutical sciences.