Simulation of a Fast-Charging Porous Thermal Energy Storage System Saturated with a Nano-Enhanced Phase Change Material

The melting of a coconut oil–CuO phase change material (PCM) embedded in an engineered nonuniform copper foam was theoretically analyzed to reduce the charging time of a thermal energy storage unit. A nonuniform metal foam could improve the effective thermal conductivity of a porous medium at regions with dominant conduction heat transfer by increasing local porosity. Moreover, the increase in porosity contributes to flow circulation in the natural convection-dominant regimes and adds a positive impact to the heat transfer rate, but it reduces the conduction heat transfer and overall heat transfer. The Taguchi optimization method was used to minimize the charging time of a shell-and-tube thermal energy storage (TES) unit by optimizing the porosity gradient, volume fractions of nanoparticles, average porosity, and porous pore sizes. The results showed that porosity is the most significant factor and lower porosity has a faster charging rate. A nonuniform porosity reduces the charging time of TES. The size of porous pores induces a negligible impact on the charging time. Lastly, the increase in volume fractions of nanoparticles reduces the charging time, but it has a minimal impact on the TES unit’s charging power.

[1]  P. Eames,et al.  A state-of-the-art review of the application of phase change materials (PCM) in Mobilized-Thermal Energy Storage (M-TES) for recovering low-temperature industrial waste heat (IWH) for distributed heat supply , 2021 .

[2]  E. Assareh,et al.  Natural heat exchange in inhomogeneous porous medium using linear and quadratic porosity distribution , 2020 .

[3]  K. Zhou,et al.  Continuous diamond-carbon nanotube foams as rapid heat conduction channels in composite phase change materials based on the stable hierarchical structure , 2020 .

[4]  Chengbin Zhang,et al.  Investigation on charging enhancement of a latent thermal energy storage device with uneven tree-like fins , 2020 .

[5]  M. Gillott,et al.  Effect of airflow channel arrangement on the discharge of a composite metal foam‐phase change material heat exchanger , 2020, International Journal of Energy Research.

[6]  J. A. Esfahani,et al.  Improving the melting performance of PCM thermal energy storage with novel stepped fins , 2020 .

[7]  M. Sheremet,et al.  Simulation for melting of paraffin for saving energy with utilize of nanoparticles , 2020 .

[8]  H. Bahai,et al.  Energy recovery from domestic radiators using a compact composite metal Foam/PCM latent heat storage , 2020, Journal of Cleaner Production.

[9]  A. Shahsavar,et al.  Numerical study of melting and solidification in a wavy double-pipe latent heat thermal energy storage system , 2020, Journal of Thermal Analysis and Calorimetry.

[10]  F. Bruno,et al.  Numerical study of melting performance enhancement for PCM in an annular enclosure with internal-external fins and metal foams , 2020 .

[11]  Ya-Ling He,et al.  Design and operating evaluation of a finned shell-and-tube thermal energy storage unit filled with metal foam , 2020 .

[12]  M. Gillott,et al.  Numerical study of a multiple-segment metal foam-PCM latent heat storage unit: Effect of porosity, pore density and location of heat source , 2019, Energy.

[13]  S. Mahmud,et al.  Charging nanoparticle enhanced bio-based PCM in open cell metallic foams: An experimental investigation , 2019, Applied Thermal Engineering.

[14]  M. Sheremet,et al.  Melting of nano-enhanced PCM inside finned radiator , 2018, Journal of Physics: Conference Series.

[15]  Joeri Van Mierlo,et al.  Phase-change materials (PCM) for automotive applications: A review , 2018 .

[16]  Ming-Jia Li,et al.  Melting performance enhancement of phase change material by a limited amount of metal foam: Configurational optimization and economic assessment , 2018 .

[17]  E. Languri,et al.  Fast charging of thermal energy storage systems enabled by phase change materials mixed with expanded graphite , 2017 .

[18]  Emmanuel C. Nsofor,et al.  Melting enhancement in triplex-tube latent heat energy storage system using nanoparticles-metal foam combination , 2017 .

[19]  Shuli Liu,et al.  A review on the air-PCM-TES application for free cooling and heating in the buildings , 2016 .

[20]  Mahboobe Mahdavi,et al.  Discharging process of a finned heat pipe–assisted thermal energy storage system with high temperature phase change material , 2016 .

[21]  Mihir Kumar Das,et al.  Application of TCE-PCM based heat sinks for cooling of electronic components: A review , 2016 .

[22]  Tae-ho Lee,et al.  Computation of the Natural Convection of Nanofluid in a Square Cavity with Homogeneous and Nonhomogeneous Models , 2014 .

[23]  Per Heiselberg,et al.  Review of thermal energy storage technologies based on PCM application in buildings , 2013 .

[24]  Emmanuel C. Nsofor,et al.  Solidification enhancement with multiple PCMs, cascaded metal foam and nanoparticles in the shell-and-tube energy storage system , 2020 .

[25]  Li Ma,et al.  Thermal conductivity enhancement of phase change materials with 3D porous diamond foam for thermal energy storage , 2019, Applied Energy.

[26]  Brian Straughan,et al.  Convection in Porous Media , 2008 .