A novel wireless power transfer for in-motion EV/PHEV charging

Wireless power transfer (WPT) is a convenient, safe, and autonomous means for electric and plug-in hybrid electric vehicle charging that has seen rapid growth in recent years for stationary applications. WPT does not require bulky contacts, plugs, and wires, is not affected by dirt or weather conditions, and is as efficient as conventional charging systems. When applied in-motion, WPT additionally relives range anxiety, adds further convenience, reduces battery size, and may help increase the battery life through charge sustaining approach. This study summarizes some of the recent activities of Oak Ridge National Laboratory (ORNL) in WPT charging of EV and PHEV's inmotion. Laboratory experimental results that highlight the wireless transfer of power to a moving receiver coil as it passes a pair of transmit coils and investigation of results of insertion loss due to roadway surfacing materials. Some of the experimental lessons learned are also included in this study.

[1]  Srdjan Lukic,et al.  Optimal resonant tank design considerations for primary track compensation in Inductive Power Transfer systems , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[2]  Takehiro Imura,et al.  Basic experimental study on helical antennas of wireless power transfer for Electric Vehicles by using magnetic resonant couplings , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[3]  Hiroshi Sakamoto,et al.  Ferrite core couplers for inductive chargers , 2002, Proceedings of the Power Conversion Conference-Osaka 2002 (Cat. No.02TH8579).

[4]  R. Mecke,et al.  High frequency resonant inverter for contactless energy transmission over large air gap , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[5]  John Michael Miller,et al.  A Program for Individual Sustainable Mobility , 2004 .

[6]  Matthew B. Scudiere,et al.  Wireless Power Transfer for Electric Vehicles , 2011 .

[7]  Chulwoo Kim,et al.  Adaptive frequency with power-level tracking system for efficient magnetic resonance wireless power transfer , 2012 .

[8]  P. M. Ryan,et al.  Grid side regulation of wireless power charging of plug-in electric vehicles , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[9]  J. T. Boys,et al.  Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems , 2011, IEEE Transactions on Power Electronics.

[10]  Grant A. Covic,et al.  A new primary power regulation method for contactless power transfer , 2009, 2009 IEEE International Conference on Industrial Technology.

[11]  Grant A. Covic,et al.  A bipolar primary pad topology for EV stationary charging and highway power by inductive coupling , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[12]  Y. Nagatsuka,et al.  Compact contactless power transfer system for electric vehicles , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[13]  Ching-Tsai Pan,et al.  A Primary-Side Control Strategy for Series-Parallel Loosely Coupled Inductive Power Transfer Systems , 2007, 2007 2nd IEEE Conference on Industrial Electronics and Applications.

[14]  Omer C. Onar,et al.  Oak Ridge National Laboratory In-Motion Wireless Power Transfer System , 2012 .

[15]  Sungwoo Lee,et al.  On-Line Electric Vehicle using inductive power transfer system , 2010, 2010 IEEE Energy Conversion Congress and Exposition.