On airborne nano/micro-sized wear particles released from low-metallic automotive brakes.

The paper addresses the wear particles released from commercially available "low-metallic" automotive brake pads subjected to brake dynamometer tests. Particle size distribution was measured in situ and the generated particles were collected. The collected fractions and the original bulk material were analyzed using several chemical and microscopic techniques. The experiments demonstrated that airborne wear particles with sizes between 10 nm and 20 μm were released into the air. The numbers of nanoparticles (< 100 nm) were by three orders of magnitude larger when compared to the microparticles. A significant release of nanoparticles was measured when the average temperature of the rotor reached 300°C, the combustion initiation temperature of organics present in brakes. In contrast to particle size distribution data, the microscopic analysis revealed the presence of nanoparticles, mostly in the form of agglomerates, in all captured fractions. The majority of elements present in the bulk material were also detected in the ultra-fine fraction of the wear particles.

[1]  Peter J. Blau,et al.  Characteristics and morphology of wear particles from laboratory testing of disk brake materials , 2004 .

[2]  Christopher A. Laroo,et al.  Brake Wear Particulate Matter Emissions , 2000 .

[3]  Peter J. Blau,et al.  Characteristics of wear particles produced during friction tests of conventional and unconventional disc brake materials , 2003 .

[4]  Borja Arias,et al.  A TG/DTA study on the effect of coal blending on ignition behaviour , 2004 .

[5]  K. Adachi,et al.  Characterization of heavy metal particles embedded in tire dust. , 2004, Environment international.

[6]  G. Dave,et al.  Occurrence and effects of tire wear particles in the environment--a critical review and an initial risk assessment. , 2009, Environmental pollution.

[7]  G. Kasper,et al.  Fragmentation and bond strength of airborne diesel soot agglomerates , 2008, Particle and Fibre Toxicology.

[8]  G. Oberdörster,et al.  Pulmonary effects of inhaled ultrafine particles , 2000, International archives of occupational and environmental health.

[9]  Staffan Jacobson,et al.  Surface characterisation of brake pads after running under silent and squealing conditions , 1999 .

[10]  David Rafaja,et al.  On friction layer formation in polymer matrix composite materials for brake applications , 2002 .

[11]  Marianne Geiser,et al.  Deposition and biokinetics of inhaled nanoparticles , 2010, Particle and Fibre Toxicology.

[12]  M. A. Wright,et al.  Automotive Brake Lining Characterization , 1997 .

[13]  R. P. Madden,et al.  Characteristics of the , 1965 .

[14]  Jana Kukutschová,et al.  Wear performance and wear debris of semimetallic automotive brake materials , 2010 .

[15]  G. Oberdörster,et al.  Nanotoxicology: An Emerging Discipline Evolving from Studies of Ultrafine Particles , 2005, Environmental health perspectives.

[16]  Minghou Xu,et al.  Mechanisms of the central mode particle formation during pulverized coal combustion , 2009 .

[17]  M. Griepentrog,et al.  Chemical and microstructural changes induced by friction and wear of brakes , 2001 .

[18]  Klaus Willeke,et al.  Aerosol Measurement: Principles, Techniques, and Applications , 2001 .

[19]  J. Casado,et al.  Raman spectroscopic characterization of some commercially available carbon black materials , 1995 .

[20]  Gerwin J. Puppels,et al.  Raman spectroscopic characterization of the liver , 1999, Photonics West - Biomedical Optics.

[21]  Jana Kukutschová,et al.  Wear mechanism in automotive brake materials, wear debris and its potential environmental impact , 2009 .

[22]  Jianjun Liu,et al.  SiO2 nanoparticles induce cytotoxicity and protein expression alteration in HaCaT cells , 2010, Particle and Fibre Toxicology.

[23]  R. Cole,et al.  Environmentally persistent free radicals amplify ultrafine particle mediated cellular oxidative stress and cytotoxicity , 2009, Particle and Fibre Toxicology.

[24]  M Matti Maricq,et al.  Airborne brake wear debris: size distributions, composition, and a comparison of dynamometer and vehicle tests. , 2003, Environmental science & technology.