Influence of Powder Particle Size on the Microstructure of a Hot Isostatically Pressed Superalloy

[1]  Jun Zhou,et al.  Linear friction welding of dissimilar Ni-based superalloys: microstructure evolution and thermo-mechanical interaction , 2021 .

[2]  H. Xue,et al.  Solute segregation induced stabilizing and strengthening effects on Ni Σ3 [110](111) symmetrical tilt grain boundary in nickel-based superalloys , 2021 .

[3]  Z. Wang,et al.  Neural network model for correlating microstructural features and hardness properties of nickel-based superalloys , 2020 .

[4]  Masaya Higashi,et al.  Effect of initial powder particle size on the hot workability of powder metallurgy Ni-based superalloys , 2020 .

[5]  Hong Wu,et al.  Experimental study and numerical simulation of dynamic recrystallization for a FGH96 superalloy during isothermal compression , 2020 .

[6]  Rongcan Zhou,et al.  Plastic strain-induced evolution of CSL boundaries at elevated temperature for Ni-base superalloy: experimental and phase-field perspective , 2020 .

[7]  Hong Wu,et al.  Effect of heat treatment on mechanical property and microstructure of a powder metallurgy nickel-based superalloy , 2019, Materials Science and Engineering: A.

[8]  Liwei Wang,et al.  Effect of delta ferrites on the anisotropy of impact toughness in martensitic heat-resistant steel , 2019, Journal of Materials Research and Technology.

[9]  Lan Huang,et al.  Effects of strain amount and strain rate on grain structure of a novel high Co nickel-based polycrystalline superalloy , 2017 .

[10]  F. Liu,et al.  A high-throughput methodology search for the optimum cooling rate in an advanced polycrystalline nickel base superalloy , 2017 .

[11]  Rui Yang,et al.  Preparation of hot-isostatic-pressed powder metallurgy superalloy Inconel 718 free of prior particle boundaries , 2017 .

[12]  R. Poprawe,et al.  A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder , 2016 .

[13]  Mark Hardy,et al.  Effects of microstructure on high temperature dwell fatigue crack growth in a coarse grain PM nickel based superalloy , 2015 .

[14]  Q. Bai,et al.  Review and Analysis of Powder Prior Boundary (PPB) Formation in Powder Metallurgy Processes for Nickel-based Super Alloys , 2015 .

[15]  J. Rotella,et al.  Grain boundary engineering of powder processed Ni-base superalloy RR1000: Influence of the deformation parameters , 2015 .

[16]  J. Guedou,et al.  Production of Net-Shape Static Parts by Direct HIPing of Nickel Base Superalloy Prealloyed Powders , 2011 .

[17]  G. Appa Rao,et al.  Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 718 , 2006 .

[18]  T. Pollock,et al.  Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties , 2006 .

[19]  J. Mendez,et al.  On the role of γ particles within γ′ precipitates on damage accumulation in the P/M nickel-base superalloy N18 , 2005 .

[20]  K. Frisk,et al.  Thermodynamic modelling of the M6C carbide in cemented carbides and high-speed steel , 2005 .

[21]  Wanhong Yang,et al.  Cooling precipitation and strengthening study in powder metallurgy superalloy Rene88DT , 2002 .

[22]  Helen V. Atkinson,et al.  Fundamental aspects of hot isostatic pressing: An overview , 2000 .

[23]  F. Bedir,et al.  Modelling of deformation and microstructural changes in P/M Rene 95 under isothermal forging conditions , 1988 .

[24]  A. Miedema,et al.  Cohesion in alloys — fundamentals of a semi-empirical model , 1980 .

[25]  G. W. Toop,et al.  Predicting Ternary Activities Using Binary Data , 1965 .