State-of-the-art of 3D printing technology of cementitious material—An emerging technique for construction

[1]  G. Ma,et al.  Visualization of the three-dimensional structure and stress field of aggregated concrete materials through 3D printing and frozen-stress techniques , 2017 .

[2]  R. H. Sanatgar,et al.  Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters , 2017 .

[3]  Peter E.D. Love,et al.  Digital reproduction of historical building ornamental components: From 3D scanning to 3D printing , 2017 .

[4]  G. Ma,et al.  Visualization and Transparentization of the Structure and Stress Field of Aggregated Geomaterials Through 3D Printing and Photoelastic Techniques , 2017, Rock Mechanics and Rock Engineering.

[5]  Jong-Pil Won,et al.  Shrinkage characteristics of structural nano-synthetic fibre-reinforced cementitious composites , 2016 .

[6]  Nathalie Labonnote,et al.  Additive construction: State-of-the-art, challenges and opportunities , 2016 .

[7]  Abdulkader Ismail Al-Hadithi,et al.  The possibility of enhancing some properties of self-compacting concrete by adding waste plastic fibers , 2016 .

[8]  J. Sanjayan,et al.  Method of formulating geopolymer for 3D printing for construction applications , 2016 .

[9]  S. Cavalaro,et al.  Parameters controlling early age hydration of cement pastes containing accelerators for sprayed concrete , 2016 .

[10]  A. Dalvand,et al.  Use of silica fume and recycled steel fibers in self-compacting concrete (SCC) , 2016 .

[11]  S. Delvasto,et al.  Properties of self-compacting concrete on fresh and hardened with residue of masonry and recycled concrete , 2016 .

[12]  Todd Goldstein,et al.  Three dimensional printing: A review on the utility within medicine and otolaryngology. , 2016, International journal of pediatric otorhinolaryngology.

[13]  Simon A. Austin,et al.  Modelling curved-layered printing paths for fabricating large-scale construction components , 2016 .

[14]  C M Choudhari,et al.  Product Development and its Comparative Analysis by SLA, SLS and FDM Rapid Prototyping Processes , 2016 .

[15]  Farook Hamzeh,et al.  3D CONCRETE PRINTING: MACHINE AND MIX DESIGN , 2016 .

[16]  Xiangyu Wang,et al.  A critical review of the use of 3-D printing in the construction industry , 2016 .

[17]  Jinbao Guo,et al.  Fabrication of highly conductive graphene flexible circuits by 3D printing , 2016 .

[18]  Marinella Levi,et al.  UV-Assisted 3D Printing of Glass and Carbon Fiber-Reinforced Dual-Cure Polymer Composites , 2016, Materials.

[19]  Clément Gosselin,et al.  Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders , 2016 .

[20]  G. Griffini,et al.  3D-printable CFR polymer composites with dual-cure sequential IPNs , 2016 .

[21]  Damien Rangeard,et al.  Structural built-up of cement-based materials used for 3D-printing extrusion techniques , 2016 .

[22]  Stephen Oluwashola Akande,et al.  Assessment of tests for use in process and quality control systems for selective laser sintering of polyamide powders , 2016 .

[23]  Xia-Ting Feng,et al.  Reverse modelling of natural rock joints using 3D scanning and 3D printing , 2016 .

[24]  Caterina Casavola,et al.  Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory , 2016 .

[25]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[26]  Pankaj Munjal,et al.  Role of water/cement ratio on strength development of cement mortar , 2015 .

[27]  Y. Ju,et al.  An experimental investigation of the thermal spalling of polypropylene-fibered reactive powder concrete exposed to elevated temperatures , 2015 .

[28]  Jian fei Chen,et al.  Mechanical Properties of Structures 3D-Printed With Cementitious Powders , 2015, 3D Concrete Printing Technology.

[29]  Ż. A. Mierzejewska,et al.  Selective Laser Sintering – Binding Mechanism And Assistance In Medical Applications , 2015 .

[30]  Jie Sun,et al.  3D food printing an innovative way of mass customization in food fabrication , 2015 .

[31]  A. Saprykin,et al.  Prospects of Creating Products Using Selective Laser Sintering , 2015 .

[32]  Jun Wang,et al.  A Comparative Review of Building Information Modelling Implementation in Building and Infrastructure Industries , 2015 .

[33]  Benjamin M Wu,et al.  Recent advances in 3D printing of biomaterials , 2015, Journal of Biological Engineering.

[34]  Benjamin Kading,et al.  Utilizing in-situ resources and 3D printing structures for a manned Mars mission , 2015 .

[35]  Jürgen Groll,et al.  Fiber reinforcement during 3D printing , 2015 .

[36]  Min Lee,et al.  TGF-β1 conjugated chitosan collagen hydrogels induce chondrogenic differentiation of human synovium-derived stem cells , 2015, Journal of biological engineering.

[37]  Martin Skitmore,et al.  Three-dimensional printing in the construction industry: A review , 2015 .

[38]  Liang Feng,et al.  Study on the Status Quo and Problems of 3D Printed Buildings in China , 2014 .

[39]  A. Basit,et al.  Fused-filament 3D printing (3DP) for fabrication of tablets. , 2014, International journal of pharmaceutics.

[40]  Jaroslaw Kotlinski,et al.  Mechanical properties of commercial rapid prototyping materials , 2014 .

[41]  Yang Ju,et al.  Visualization of the complex structure and stress field inside rock by means of 3D printing technology , 2014 .

[42]  Steve Simon,et al.  Options for additive rapid prototyping methods (3D printing) in MEMS technology , 2014 .

[43]  Johannes Günther,et al.  Continuous 3D-printing for additive manufacturing , 2014 .

[44]  Joshua M. Pearce,et al.  Environmental Life Cycle Analysis of Distributed Three-Dimensional Printing and Conventional Manufacturing of Polymer Products , 2013 .

[45]  Ali Mardani-Aghabaglou,et al.  Effect of different types of superplasticizer on fresh, rheological and strength properties of self-consolidating concrete , 2013 .

[46]  Xue Liang Ma,et al.  Research on Application of SLA Technology in the 3D Printing Technology , 2013 .

[47]  Jung-Hoon Kim,et al.  Development of an Automated Freeform Construction System and its Construction Materials , 2013 .

[48]  Shen-Guan Shih,et al.  BIM-based Computer-Aided Architectural Design , 2013 .

[49]  Madhu Thangavelu,et al.  Robotic Construction by Contour Crafting: The Case of Lunar Construction , 2012 .

[50]  Francisca Puertas,et al.  Compatibility between superplasticizer admixtures and cements with mineral additions , 2012 .

[51]  Yusuf Arayici,et al.  Building information modelling (BIM) implementation and remote construction projects: Issues, Challenges and Critiques , 2012, J. Inf. Technol. Constr..

[52]  T. T. Le,et al.  Mix design and fresh properties for high-performance printing concrete , 2012 .

[53]  Julia Will,et al.  Three-dimensional printing of flash-setting calcium aluminate cement , 2011 .

[54]  Mike Kagioglou,et al.  BIM adoption and implementation for architectural practices , 2011 .

[55]  Weisheng Lu,et al.  Exploring critical success factors for waste management in construction projects of China , 2010 .

[56]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[57]  Frederik L. Giesel,et al.  3D printing based on imaging data: review of medical applications , 2010, International Journal of Computer Assisted Radiology and Surgery.

[58]  G. Gibbons,et al.  3D Printing of cement composites , 2010 .

[59]  G. Jabbour,et al.  Inkjet Printing—Process and Its Applications , 2010, Advanced materials.

[60]  Jean-Pierre Kruth,et al.  Composites by rapid prototyping technology , 2010 .

[61]  Tor Arne Hammer,et al.  Flow conditions of fresh mortar and concrete in different pipes , 2009 .

[62]  Merve Erdal,et al.  Manufacturing of Functionally Graded Porous Products by Selective Laser Sintering , 2009 .

[63]  Jun Zhang,et al.  Engineered cementitious composite with characteristic of low drying shrinkage , 2009 .

[64]  Alistair G.F. Gibb,et al.  Design, data and process issues for mega-scale rapid manufacturing machines used for construction , 2008 .

[65]  C. Hsu,et al.  EDM electrode manufacturing using RP combining electroless plating with electroforming , 2008 .

[66]  Mark A. Ganter,et al.  A review of process development steps for new material systems in three dimensional printing (3DP) , 2008 .

[67]  C. H. Ahrens,et al.  Rapid Manufacturing and Rapid Tooling of Polymer Miniaturized Parts Using Stereolithography , 2008 .

[68]  J. Yang,et al.  Mesomechanism of steel fiber reinforcement and toughening of reactive powder concrete , 2007 .

[69]  Robert L. Williams,et al.  Cable-Suspended Robotic Contour Crafting System , 2007 .

[70]  Carlo Pistolesi,et al.  A Case History: Effect of Moisture on the Setting Behaviour of a Portland Cement Reacting with an Alkali-free Accelerator , 2007 .

[71]  Benoît Bissonnette,et al.  Drying Shrinkage, Curling, and Joint Opening of Slabs-on-Ground , 2007 .

[72]  A. Gibb,et al.  Freeform Construction: Mega-scale Rapid Manufacturing for construction , 2007 .

[73]  Behrokh Khoshnevis,et al.  Mega-scale fabrication by Contour Crafting , 2006 .

[74]  Taehyo Park,et al.  Rheological Properties of Cementitious Materials Containing Mineral Admixtures , 2005 .

[75]  B. Rongbing,et al.  Synthesis and evaluation of shrinkage-reducing admixture for cementitious materials , 2005 .

[76]  Mohamed Lachemi,et al.  Performance of new viscosity modifying admixtures in enhancing the rheological properties of cement paste , 2004 .

[77]  David Bak,et al.  Rapid prototyping or rapid production? 3D printing processes move industry towards the latter , 2003 .

[78]  Etsuo Sakai,et al.  Effect of particle size distribution of fly ash–cement system on the fluidity of cement pastes , 2003 .

[79]  Victor C. Li,et al.  Development of a self-consolidating engineered cementitious composite employing electrosteric dispersion/stabilization , 2003 .

[80]  N Hopkinson,et al.  Analysis of rapid manufacturing—using layer manufacturing processes for production , 2003 .

[81]  Ian Gibson,et al.  Rapid prototyping for architectural models , 2002 .

[82]  Peter A. Claisse,et al.  Workability of Cement Pastes , 2001 .

[83]  Surendra P. Shah,et al.  Microstructure of extruded cement-bonded fiberboard , 2001 .

[84]  H Böhni,et al.  The influence of alkali-free and alkaline shotcrete accelerators within cement systems: I. Characterization of the setting behavior , 2001 .

[85]  Behrokh Khoshnevis,et al.  Experimental investigation of contour crafting using ceramics materials , 2001 .

[86]  Chiara F. Ferraris,et al.  The influence of mineral admixtures on the rheology of cement paste and concrete , 2001 .

[87]  Wendell Mendell,et al.  The Moon: Resources, Future Development, and Colonization , 2000 .

[88]  Joseph Pegna,et al.  Exploratory investigation of solid freeform construction , 1997 .

[89]  Maurice Archer,et al.  The Entrepreneur , 1985, IEEE Engineering Management Review.

[90]  Viktor Mechtcherine,et al.  Studying the Printability of Fresh Concrete for Formwork-Free Concrete Onsite 3D Printing Technology (CONPrint3D) , 2019, 3D Concrete Printing Technology.

[91]  Camille Holt,et al.  Construction 3D Printing , 2019, 3D Concrete Printing Technology.

[92]  An Chen,et al.  Applicability and Limitations of 3D Printing for Civil Structures , 2015 .

[93]  Valentina Colla,et al.  Building components for an outpost on the Lunar soil by means of a novel 3D printing technology , 2014 .

[94]  Farook Hamzeh,et al.  The Reduction of Construction Duration by Implementing Contour Crafting (3D Printing) , 2014 .

[95]  Jared Friedman,et al.  Experiments in Additive Clay Depositions , 2014 .

[96]  Jing Zhang,et al.  Optimal machine operation planning for construction by Contour Crafting , 2013 .

[97]  Mohammed Sonebi,et al.  Optimisation of rheological parameters and mechanical properties of superplasticised cement grouts containing metakaolin and viscosity modifying admixture , 2013 .

[98]  Valentina Colla,et al.  Large Scale 3D Printing: from Deep Sea to the Moon , 2013 .

[99]  Klaudius Henke,et al.  Wood based bulk material in 3D printing processes for applications in construction , 2012, European Journal of Wood and Wood Products.

[100]  Richard A. Buswell,et al.  Developments in construction-scale additive manufacturing processes , 2012 .

[101]  Richard A. Buswell,et al.  Development of a viable concrete printing process , 2011 .

[102]  Simon A. Austin,et al.  Fabricating construction components using layer manufacturing technology , 2009 .

[103]  H. H. C. Wong,et al.  Effects of packing density, excess water and solid surface area on flowability of cement paste , 2008 .

[104]  Chris I. Goodier,et al.  Low-volume wet-process sprayed concrete: pumping and spraying , 2005 .

[105]  Behrokh Khoshnevis,et al.  Automated construction by contour craftingrelated robotics and information technologies , 2004 .

[106]  Xue Yan,et al.  PII: 0010-4485(95)00035-6 , 2003 .

[107]  Behrokh Khoshnevis,et al.  Innovative Rapid Prototyping Process Makes Large Sized, Smooth Surfaced Complex Shapes in a Wide Variety of Materials , 1998 .