论文信息 - ULTIMATE PULLOUT CAPACITY OF SHALLOW VERTICAL ANCHORS IN CLAY

ULTIMATE PULLOUT CAPACITY OF SHALLOW VERTICAL ANCHORS IN CLAY

ABSTRACT Model test results for the ultimate pullout capacity of shallow rectangular vertical anchor plates embedded in saturated clay have been presented. The width-to-height ratio of the anchor plates used in the tests has been varied from one to five. The ultimate pullout load of an anchor can be expressed in the form of a nondimensional breakout factor. Based on the experimental results, an empirical equation for determination of the ultimate pullout load has been presented.

[1] Gregory P. Tschebotarioff,et al. Foundations, Retaining and Earth Structures , 1973 .

[2] N. Krebs Ovesen,et al. Design Method for Vertical Anchor Slabs in Sand , 1973 .

[3] W J Neely,et al. Failure loads of vertical anchor plates in sand : 14F, 2T, 27R. J. SOIL MECH. FOUND. DIV. V99, SM9, 1973, P669–685 , 1973 .

[4] Braja M. Das. Pullout Resistance of Vertical Anchors , 1975 .

[5] Braja M. Das,et al. Holding Capacity of Vertical Anchor Slabs in Granular Soil , 1983 .

[6] Braja M. Das,et al. Ultimate Resistance of Deep Vertical Anchor in Sand , 1977 .