Investigating parametric effects on performance of a high‐temperature URSOFC

Summary The aim of this paper is to investigate the effects of variable parameters on the performance of a unitized regenerative solid oxide fuel cell (URSOFC) using a two-dimensional axisymmetric simulation model. This model was validated using the performance curves of an in-house button-type URSOFC. The parameters studied include the operating temperature and the porosity, tortuosity, and grain diameter of the electrodes while the URSOFC is operated in the solid oxide fuel cell mode and the solid oxide electrolyzer cell (SOEC) mode. The predicted results show that the temperature and the electrode porosity have a beneficial effect on the performance of the URSOFC because of an enhancement of the electrochemical reactions and the species mass transfer, respectively. However, when the URSOFC is operated in the SOEC mode, the cell performance decreases as the electrode porosity increases. This indicates that the decreasing reaction active sites as a result of the higher porosity have a dominant effect on the performance in the SOEC mode. The cell performance also decreases as the tortuosity and grain diameter of the electrodes increase. In addition, the effect of the electrode grain diameter on the cell performance is predicted to be insignificant for the URSOFC operated in the SOEC mode. The results of investigations presented in this paper can assist in the optimal design and management of a URSOFC. Copyright © 2014 John Wiley & Sons, Ltd.

[1]  Yixiang Shi,et al.  Theoretical modeling of air electrode operating in SOFC mode and SOEC mode: The effects of microstructure and thickness , 2014 .

[2]  Juan C. Ordonez,et al.  Composite electrode modelling and optimization for solid oxide fuel cells , 2013 .

[3]  Juan C. Ordonez,et al.  Constructal flow structure for a single SOFC , 2007 .

[4]  Jonathan Deseure,et al.  Simulation of a high temperature electrolyzer , 2010 .

[5]  Amornchai Arpornwichanop,et al.  Electrochemical study of a planar solid oxide fuel cell: Role of support structures , 2008 .

[6]  Stefano Ubertini,et al.  Experimental and numerical analysis of a radial flow solid oxide fuel cell , 2007 .

[7]  Meng Ni,et al.  Modeling of a planar solid oxide fuel cell based on proton‐conducting electrolyte , 2010 .

[8]  Eugene E. Petersen,et al.  Diffusion in a pore of varying cross section , 1958 .

[9]  Dennis Y.C. Leung,et al.  Mathematical modeling of the coupled transport and electrochemical reactions in solid oxide steam electrolyzer for hydrogen production , 2007 .

[10]  Scott A. Barnett,et al.  Effect of LSM-YSZ cathode on thin-electrolyte solid oxide fuel cell performance , 1997 .

[11]  Guo-Bin Jung,et al.  Fabrication of hydrogen electrode supported cell for utilized regenerative solid oxide fuel cell application , 2012 .

[12]  Xingjian Xue,et al.  Mathematical Modeling Analysis of Regenerative Solid Oxide Fuel Cells in Switching Mode Conditions , 2010 .

[13]  Panagiotis Tsiakaras,et al.  High temperature electrolyzer based on solid oxide co-ionic electrolyte: A theoretical model , 2007 .

[14]  Sandip Mazumder,et al.  Rigorous 3-D mathematical modeling of PEM fuel cells. II. Model predictions with liquid water transport , 2003 .

[15]  Paolo Iora,et al.  High efficiency process for the production of pure oxygen based on solid oxide fuel cell–solid oxide electrolyzer technology , 2009 .

[16]  Meng Ni,et al.  Computational fluid dynamics modeling of a solid oxide electrolyzer cell for hydrogen production , 2009 .

[17]  Nigel P. Brandon,et al.  Hydrogen production through steam electrolysis: Model-based dynamic behaviour of a cathode-supported intermediate temperature solid oxide electrolysis cell , 2008 .

[18]  J. O’Brien,et al.  Progress in high-temperature electrolysis for hydrogen production using planar SOFC technology , 2005 .

[19]  Dennis Y.C. Leung,et al.  Theoretical analysis of reversible solid oxide fuel cell based on proton-conducting electrolyte , 2008 .

[20]  Young Beom Kim,et al.  Influence of the grain size of samaria-doped ceria cathodic interlayer for enhanced surface oxygen kinetics of low-temperature solid oxide fuel cell , 2014 .

[21]  M. Fowler,et al.  Performance comparison of Fick’s, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anode , 2003 .

[22]  Ay Su,et al.  Analytically investigating the characteristics of a high‐temperature unitized regenerative solid oxide fuel cell , 2013 .

[23]  I. Dincer,et al.  Mathematical modeling of planar solid oxide fuel cells , 2006 .