Advanced qualification methodology for actively cooled plasma facing components

The address for affiliation 1 is incorrect. The correct address should be Association Euratom-CEA, CEA/DSM/DRFC, F-13108, Saint Paul lez Durance.

[1]  F. Escourbiac,et al.  Development of an original active thermography method adapted to ITER plasma facing components control , 2005 .

[2]  H. Greuner,et al.  Design, performance and construction of a 2 MW ion beam test facility for plasma facing components , 2005 .

[3]  H. Greuner,et al.  Applied technologies and inspections for the W7-X pre-series target elements , 2005 .

[4]  R. Mitteau,et al.  In-situ monitoring of actively cooled plasma facing components using acoustic and thermal methods , 2007 .

[5]  W. Dänner,et al.  EU R&D on divertor components , 2005 .

[6]  J. Moysan,et al.  Infrared images data merging for plasma-facing component inspection , 2007 .

[7]  F. Escourbiac,et al.  Application of lock-in thermography non destructive technique to CFC armoured plasma facing components , 2007 .

[8]  M. Merola,et al.  Acceptance criteria for the ITER divertor vertical target , 2006 .

[9]  F. Escourbiac,et al.  Infrared thermography inspection methods applied to the target elements of W7-X divertor , 2007 .

[10]  J. Cordier.  Preliminary results and lessons learned from upgrading the Tore Supra actively cooled plasma facing components (CIEL project) , 2003 .

[11]  S. Grigoriev,et al.  Behaviour of the PFC tiles on the ITER divertor under critical loading conditions , 2003 .

[12]  A. Durocher,et al.  Quality control of plasma facing components for Tore Supra , 2003 .

[13]  J. Schlosser,et al.  Experience feedback from high heat flux component manufacturing for Tore Supra , 2001 .

[14]  Claude Jauffret,et al.  Analysis of SATIR test for the qualification of high heat flux components: defect detection and classification by signal-to-noise ratio maximization , 2007 .