Modelling water intrusion and oxygen diffusion in a reconstructed microporous layer of PEM fuel cells

The hydrophobic microporous layer (MPL) in PEM fuel cell improves water management but reduces oxygen transport. We investigate these conflict impacts using nanotomography and pore-scale modelling. The binary image of a MPL is acquired using FIB/SEM tomography. The water produced at the cathode is assumed to condense in the catalyst layer (CL), and then builds up a pressure before moving into the MPL. Water distribution in the MPL is calculated from its pore geometry, and oxygen transport through it is simulated using pore-scale models considering both bulk and Knudsen diffusions. The simulated oxygen concentration and flux at all voxels are volumetrically averaged to calculate the effective diffusion coefficients. For water flow, we found that when the MPL is too hydrophobic, water is unable to move through it and must find alternative exits. For oxygen diffusion, we found that the interaction of the bulk and Knudsen diffusions at pore scale creates an extra resistance after the volumetric average, and that the conventional dusty model substantially overestimates the effective diffusion coefficient.

[1]  E. Kjeang,et al.  A customized framework for 3-D morphological characterization of microporous layers , 2013 .

[2]  Mark Pritzker,et al.  On the role of the microporous layer in PEMFC operation , 2009 .

[3]  R. Schweiss,et al.  Mitigation of Water Management in PEM Fuel Cell Cathodes by Hydrophilic Wicking Microporous Layers , 2010 .

[4]  Shohji Tsushima,et al.  Soft X-ray visualization of the liquid water transport within the cracks of micro porous layer in PEMFC , 2011 .

[5]  E. A. Wargo,et al.  Resolving macro- and micro-porous layer interaction in polymer electrolyte fuel cells using focused ion beam and X-ray computed tomography , 2013 .

[6]  Emin Caglan Kumbur,et al.  Investigation of macro- and micro-porous layer interaction in polymer electrolyte fuel cells , 2008 .

[7]  Eunsook Lee,et al.  Development of a novel hydrophobic/hydrophilic double micro porous layer for use in a cathode gas di , 2011 .

[8]  Shohji Tsushima,et al.  Observation of dynamic liquid water transport in the microporous layer and gas diffusion layer of an operating PEM fuel cell by high-resolution soft X-ray radiography , 2013 .

[9]  Heinrich Riesemeier,et al.  Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography , 2013 .

[10]  Roland Zengerle,et al.  Nano-morphology of a polymer electrolyte fuel cell catalyst layer—imaging, reconstruction and analysis , 2011 .

[11]  F. Weng,et al.  Experimental study of micro-porous layers for PEMFC with gradient hydrophobicity under various humidity conditions , 2011 .

[12]  Rui Chen,et al.  3D reconstruction of a gas diffusion layer and a microporous layer , 2010 .

[13]  S. Lee,et al.  Tomographic analysis of porosity variation in gas diffusion layer under freeze-thaw cycles , 2012 .

[14]  S. Shimpalee,et al.  Effect of microporous layer on MacMullin number of carbon paper gas diffusion layer , 2012 .

[15]  E. A. Wargo,et al.  Comparison of focused ion beam versus nano-scale X-ray computed tomography for resolving 3-D microstructures of porous fuel cell materials , 2013 .

[16]  Yutaka Tabe,et al.  Observation of water transport in the micro-porous layer of a polymer electrolyte fuel cell with a freezing method and cryo-scanning electron microscope , 2014 .

[17]  P. Cañizares,et al.  Optimisation of the Microporous Layer for a Polybenzimidazole‐Based High Temperature PEMFC – Effect of Carbon Content , 2010 .

[18]  Liang Hao,et al.  Lattice Boltzmann simulations of water transport in gas diffusion layer of a polymer electrolyte membrane fuel cell , 2010 .

[19]  S. H. Kim,et al.  Improvement of the mechanical durability of micro porous layer in a proton exchange membrane fuel cell by elimination of surface cracks , 2012 .

[20]  Z. Fishman,et al.  Heterogeneous Through-Plane Porosity Distributions for Treated PEMFC GDLs. II. Effect of MPL Cracks , 2011 .

[21]  Rui Chen,et al.  Nanotomography based study of gas diffusion layers , 2010 .

[22]  Konrad Steiner,et al.  A multi-scale approach to material modeling of fuel cell diffusion media , 2011 .

[23]  R. Zengerle,et al.  Direct three-dimensional reconstruction of a nanoporous catalyst layer for a polymer electrolyte fuel cell , 2011 .

[24]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[25]  Xianguo Li,et al.  Experimental measurement of effective diffusion coefficient of gas diffusion layer/microporous layer in PEM fuel cells , 2012 .

[26]  Dai-jun Yang,et al.  A review on water balance in the membrane electrode assembly of proton exchange membrane fuel cells , 2009 .

[27]  Chao-Yang Wang,et al.  Two-Phase Transport in Polymer Electrolyte Fuel Cells with Bilayer Cathode Gas Diffusion Media , 2005 .

[28]  Sandip Mazumder,et al.  Numerical investigation of the effect of cathode catalyst layer structure and composition on polymer electrolyte membrane fuel cell performance , 2008 .

[29]  Y. Sung,et al.  Influence of hydrophilicity in micro-porous layer for polymer electrolyte membrane fuel cells , 2011 .

[30]  Evan J. See,et al.  Two-phase flow in GDL and reactant channels of a proton exchange membrane fuel cell , 2014 .

[31]  R. Zengerle,et al.  Modelling the water distribution within a hydrophilic and hydrophobic 3D reconstructed cathode catalyst layer of a proton exchange membrane fuel cell , 2013 .

[32]  L. Pant,et al.  Absolute permeability and Knudsen diffusivity measurements in PEMFC gas diffusion layers and micro porous layers , 2012 .

[33]  S. Hirai,et al.  Effect of liquid water distribution in gas diffusion media with and without microporous layer on PEM fuel cell performance , 2013 .

[34]  Rui Chen,et al.  Reliability of the spherical agglomerate models for catalyst layer in polymer electrolyte membrane fuel cells , 2014 .

[35]  Arvind R. Kalidindi,et al.  A two-phase model for studying the role of microporous layer and catalyst layer interface on polymer electrolyte fuel cell performance , 2013 .

[36]  Surya R. Kalidindi,et al.  3-D Microstructure Analysis of Fuel Cell Materials: Spatial Distributions of Tortuosity, Void Size and Diffusivity , 2012 .

[37]  G. Dotelli,et al.  Novel superhydrophobic microporous layers for enhanced performance and efficient water management in PEM fuel cells , 2014 .

[38]  Zhigang Qi,et al.  Improvement of water management by a microporous sublayer for PEM fuel cells , 2002 .

[39]  Surya R. Kalidindi,et al.  Selection of representative volume elements for pore-scale analysis of transport in fuel cell materials , 2012 .

[40]  Qinjun Kang,et al.  Pore-scale modeling of two-phase transport in polymer electrolyte fuel cells—progress and perspective , 2011 .

[41]  Jiujun Zhang,et al.  Micro-porous layer with composite carbon black for PEM fuel cells , 2006 .

[42]  Z. Fishman,et al.  Heterogeneous Through-Plane Porosity Distributions for Treated PEMFC GDLs I. PTFE Effect , 2011 .