Spectroscopic investigations of plasma nitriding processes: A comparative study using steel and carbon as active screen materials

Low-pressure pulsed DC H2-N2 plasmas were investigated in the laboratory active screen plasma nitriding monitoring reactor, PLANIMOR, to compare the usage of two different active screen electrodes: (i) a steel screen with the additional usage of CH4 as carbon containing precursor in the feeding gas and (ii) a carbon screen without the usage of any additional gaseous carbon precursor. Applying the quantum cascade laser absorption spectroscopy, the evolution of the concentration of four stable molecular species, NH3, HCN, CH4, and C2H2, has been monitored. The concentrations were found to be in a range of 1012–1016 molecules cm−3. By analyzing the development of the molecular concentrations at variations of the screen plasma power, a similar behavior of the monitored reaction products has been found for both screen materials, with NH3 and HCN as the main reaction products. When using the carbon screen, the concentration of HCN and C2H2 was 30 and 70 times higher, respectively, compared to the usage of the s...

[1]  N. Ullah,et al.  Improved surface properties of AISI-304 by novel duplex cathodic cage plasma nitriding , 2017 .

[2]  M. Zakaullah,et al.  Enhanced surface properties of plain carbon steel using plasma nitriding with austenitic steel cathodic cage , 2016 .

[3]  M. Zakaullah,et al.  Effect of cathodic cage size on plasma nitriding of AISI 304 steel , 2016 .

[4]  M. Waqas,et al.  Influence of pulsed power supply parameters on active screen plasma nitriding , 2016 .

[5]  J. Röpcke,et al.  In-line Process Control in the Active Screen Plasma Nitrocarburizing Using a Combined Approach Based on Infrared Laser Absorption Spectroscopy and Bias Power Management , 2016 .

[6]  M. Hannemann,et al.  Applying Quantum Cascade Laser Spectroscopy in Plasma Diagnostics , 2016 .

[7]  Xiaoying Li,et al.  Active screen plasma surface co-alloying treatments of 316 stainless steel with nitrogen and silver for fuel cell bipolar plates , 2015 .

[8]  J. Röpcke,et al.  Plasma nitriding monitoring reactor: A model reactor for studying plasma nitriding processes using an active screen. , 2015, The Review of scientific instruments.

[9]  J. Röpcke,et al.  Spectroscopic Investigations of Plasma Nitriding and Nitrocarburizing Processes Using an Active Screen: A Comparative Plasma Chemical Study of Two Reactor Types , 2015 .

[10]  J. Röpcke,et al.  Spectroscopic diagnostics of active screen plasma nitriding processes: on the interplay of active screen and model probe plasmas , 2015 .

[11]  M. Šimek,et al.  Optical diagnostics of streamer discharges in atmospheric gases , 2014 .

[12]  M. Hannemann,et al.  Langmuir probe and optical diagnostics of active screen N2–H2 plasma nitriding processes with admixture of CH4 , 2013 .

[13]  J. Röpcke,et al.  Spectroscopic studies of conventional and active screen N2–H2 plasma nitriding processes with admixtures of CH4 or CO2 , 2013 .

[14]  J. Röpcke,et al.  On the application of cw external cavity quantum cascade infrared lasers for plasma diagnostics , 2012 .

[15]  J. Röpcke,et al.  Monitoring of hydrocarbon concentrations in dust-producing RF plasmas , 2012 .

[16]  J. Röpcke,et al.  In-situ monitoring of plasma enhanced nitriding processes using infrared absorption and mass spectroscopy , 2012 .

[17]  G. Soares,et al.  Carbon nitride film deposition by active screen plasma nitriding , 2011 .

[18]  N. Bibinov,et al.  Space-resolved characterization of high frequency atmospheric-pressure plasma in nitrogen, applying optical emission spectroscopy and numerical simulation , 2011, 1109.5617.

[19]  N. Bibinov,et al.  Pulsed corona plasma source characterization for film deposition on the inner surface of tubes , 2010 .

[20]  S. C. Gallo,et al.  Study of active screen plasma processing conditions for carburising and nitriding austenitic stainless steel , 2009 .

[21]  M. Schlüter,et al.  Chemical sputtering of carbon by combined exposure to nitrogen ions and atomic hydrogen , 2008 .

[22]  M. Schlüter,et al.  Chemical sputtering of carbon materials due to combined bombardment by ions and atomic hydrogen , 2006 .

[23]  C. Hopf,et al.  Bombardment of graphite with hydrogen isotopes: A model for the energy dependence of the chemical sputtering yield , 2005 .

[24]  M. Schlüter,et al.  Chemical sputtering of carbon by nitrogen ions , 2005 .

[25]  C. Hopf,et al.  Chemical sputtering of hydrocarbon films , 2003 .

[26]  J. Röpcke,et al.  On the hydrocarbon chemistry in a H2 surface wave discharge containing methane , 2001 .

[27]  W. Jacob,et al.  Plasma chemical vapor deposition of hydrocarbon films: The influence of hydrocarbon source gas on the film properties , 1999 .

[28]  Y. Yamamura,et al.  ENERGY DEPENDENCE OF ION-INDUCED SPUTTERING YIELDS FROM MONATOMIC SOLIDS AT NORMAL INCIDENCE , 1996 .

[29]  R. Yamada.  Chemical sputtering yields of graphite , 1987 .

[30]  John U. White.  Long Optical Paths of Large Aperture , 1942 .

[31]  T. Christiansen,et al.  Gaseous processes for low temperature surface hardening of stainless steel , 2015 .

[32]  J. Röpcke,et al.  Diode laser spectroscopy of the fundamental bands of 12C14N, 13C14N, 12C15N, 13C15N free radicals in the ground 2 Sigma+ electronic state. , 2005, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[33]  T. Bell,et al.  Compound Layer Characteristics Resulting from Plasma Nitrocarburising in Atmospheres Containing Carbon Dioxide Gas Additions , 1992 .