Optimal factor evaluation for the dissolution of alumina from Azaraegbelu clay in acid solution using RSM and ANN comparative analysis

Abstract Artificial neural network (ANN) and Response Surface Methodology based on a 2 5−1 fractional factorial design were used as tools for simulation and optimisation of the dissolution process for Azaraegbelu clay. A feedforward neural network model with Levenberg–Marquard back propagating training algorithm was adapted to predict the response (alumina yield). The studied input variables were temperature, stirring speed, clay to acid dosage, leaching time and leachant concentration. The raw clay was characterized for structure elucidation via FTIR, SEM and X-ray diffraction spectroscopic techniques and the result indicates that the clay is predominantly kaolinite. Leachant concentration and dosage ratio were found to be the most significant process parameter with p-value of 0.0001. The performance of the ANN and RSM model showed adequate prediction of the response, with AAD of 11.6% and 3.6%, and R 2 of 0.9733 and 0.9568, respectively. A non-dominated optimal response of 81.45% yield of alumina at 4.6 M sulphuric acid concentration, 214 min leaching time, 0.085 g/ml dosage and 214 rpm stirring speed was established as a viable route for reduced material and operating cost via RSM.

[1]  M. Z. Alam,et al.  Statistical optimization of adsorption processes for removal of 2,4-dichlorophenol by activated carbon derived from oil palm empty fruit bunches. , 2007, Journal of environmental sciences.

[2]  Souad Djerad,et al.  Leaching of copper oxide with different acid solutions , 2009 .

[3]  D. Suhendra,et al.  FOUR-FACTOR RESPONSE SURFACE OPTIMIZATION OF THE ENZYMATIC SYNTHESIS OF WAX ESTER FROM PALM KERNEL OIL , 2010 .

[4]  S. Tsivilis,et al.  Pozzolanic activity of thermally and mechanically treated kaolins of hydrothermal origin , 2015 .

[5]  A. Kurny,et al.  Dissolution kinetics of iron oxides in clay in oxalic acid solutions , 2012, International Journal of Minerals, Metallurgy, and Materials.

[6]  Jinhui Peng,et al.  Optimization of combined mechanical activation-roasting parameters of titania slag using response surface methodology , 2010 .

[7]  O. Ombaka,et al.  Characterization of clays from Tharaka-Nithi County in Kenya for industrial and agricultural applications , 2015 .

[8]  M. Taran,et al.  Designing and optimization of separation process of iron impurities from kaolin by oxalic acid in bench-scale stirred-tank reactor , 2015 .

[9]  S. Arabia.  Extraction of Alumina from Local Clays by Hydrochloric Acid Process , 2009 .

[10]  R. Tixier,et al.  Oxidation of fatigue fracture surfaces at low crack growth rates , 1980 .

[11]  Optimization of polyesterification process for production of palm oil modified alkyd resin using response surface methodology , 2013 .

[12]  V. N. Pillai,et al.  Mechanism of kaolinite and titanium dioxide flocculation using chitosan--assistance by fulvic acids? , 2004, Water research.

[13]  Mortaza Aghbashlo,et al.  The use of artificial neural network to predict exergetic performance of spray drying process: A preliminary study , 2012 .

[14]  S. Chandrasekhar,et al.  Separation of titanoferrous impurities from kaolin by high shear pretreatment and froth flotation , 2004 .

[15]  S. Chandrasekhar,et al.  Influence of mineral impurities on the properties of kaolin and its thermally treated products , 2002 .

[16]  Meiqing Lin,et al.  Effects of tannery sludge incineration slag pretreatment on sludge dewaterability , 2013 .

[17]  R. J. Pruett,et al.  Quantitative analysis of anatase in Georgia kaolins using Raman spectroscopy , 2003 .

[18]  F. Gulshan,et al.  Kinetics of leaching of iron oxide in clay in oxalic acid and in hydrochloric acid solutions , 2014 .

[19]  L. E. Cruz,et al.  Iron removal from a kaolinitic clay by leaching to obtain high whiteness index , 2013 .

[20]  Ashwani Kumar Thukral,et al.  RSM and ANN modeling for electrocoagulation of copper from simulated wastewater: Multi objective optimization using genetic algorithm approach , 2011 .

[21]  Rekha S. Singhal,et al.  Comparison of artificial neural network (ANN) and response surface methodology (RSM) in fermentation media optimization: Case study of fermentative production of scleroglucan , 2008 .

[22]  Guo Chen,et al.  Application of response surface methodology for optimization of the synthesis of synthetic rutile from titania slag , 2012 .

[23]  B. C. Meikap,et al.  Statistical modelling and optimization of hydrolysis of urea to generate ammonia for flue gas conditioning. , 2010, Journal of hazardous materials.

[24]  Pichiah Saravanan,et al.  Optimization of operating parameters using response surface methodology for adsorption of crystal violet by activated carbon prepared from mango kernel , 2012 .

[25]  R. Gibbs.  Quantitative X-ray diffraction analysis using clay mineral standards extracted from the samples to be analysed , 1967, Clay Minerals.

[26]  A. A. Baba,et al.  Hydrometallurgical processing of a Nigerian sphalerite in hydrochloric acid: Characterization and dissolution kinetics , 2010 .

[27]  V. Ismet Ugursal,et al.  Comparison of neural network, conditional demand analysis, and engineering approaches for modeling end-use energy consumption in the residential sector , 2008 .

[28]  R. Gomes,et al.  Comparison of response surface methodology (RSM) and artificial neural networks (ANN) towards efficient extraction of artemisinin from Artemisia annua , 2014 .