Rotor Design for Diffuser Augmented Wind Turbines

Diffuser augmented wind turbines (DAWTs) can increase mass flow through the rotor substantially, but have often failed to fulfill expectations. We address high-performance diffusers, and investigate the design requirements for a DAWT rotor to efficiently convert the available energy to shaft energy. Several factors can induce wake stall scenarios causing significant energy loss. The causality between these stall mechanisms and earlier DAWT failures is discussed. First, a swirled actuator disk CFD code is validated through comparison with results from a far wake swirl corrected blade-element momentum (BEM) model, and horizontal-axis wind turbine (HAWT) reference results. Then, power efficiency versus thrust is computed with the swirled actuator disk (AD) code for low and high values of tip-speed ratios (TSR), for different centerbodies, and for different spanwise rotor thrust loading distributions. Three different configurations are studied: The bare propeller HAWT, the classical DAWT, and the high-performance multi-element DAWT. In total nearly 400 high-resolution AD runs are generated. These results are presented and discussed. It is concluded that dedicated DAWT rotors can successfully convert the available energy to shaft energy, provided the identified design requirements for swirl and axial loading distributions are satisfied.

[1]  Richard G. J. Flay,et al.  Effect of placing a diffuser around a wind turbine , 2000 .

[2]  Emmanuel Branlard,et al.  Analysis of wind turbine aerodynamics and aeroelasticity using vortex-based methods , 2015 .

[3]  K. M. Foreman,et al.  Fluid Dynamics of Diffuser-Augmented Wind Turbines , 1978 .

[4]  David Wood,et al.  Small Wind Turbines: Analysis, Design, and Application , 2011 .

[5]  Derek Grant Phillips.  An investigation on diffuser augmented wind turbine design , 2003 .

[6]  Philip Clausen,et al.  Measurements of a swirling turbulent boundary layer developing in a conical diffuser , 1993 .

[7]  Kana Horikiri,et al.  Aerodynamics of wind turbines , 2011 .

[8]  G. Lilley,et al.  A preliminary report on the design and performance of ducted windmills , 1956 .

[9]  D. H. Wood,et al.  A possible recirculation limit for expanding swirling flows , 1989 .

[10]  M. Drela.  XFOIL: An Analysis and Design System for Low Reynolds Number Airfoils , 1989 .

[11]  R. Flemming,et al.  Actuator Disc Methods Applied to Wind Turbines , 2016 .

[12]  John B. Williams,et al.  A theory and experimental investigation of ducted wind turbines , 1977 .

[13]  Yuji Ohya,et al.  A Shrouded Wind Turbine Generating High Output Power with Wind-lens Technology , 2010 .

[14]  O. Igra.  Shrouds for Aerogenerators , 1976 .

[15]  O. Igra.  Design and performance of a turbine suitable for an aerogenerator , 1976 .

[16]  Christian Bak,et al.  A Detailed investigation of the Blade Element Momentum (BEM) model based on analytical and numerical results and proposal for modifications of the BEM model , 2007 .

[17]  A. Betz.  Schraubenpropeller mit geringstem Energieverlust. Mit einem Zusatz von l. Prandtl , 1919 .

[18]  O. Igra.  The shrouded aerogenerator , 1977 .

[19]  M. Selig.  Summary of low speed airfoil data , 1995 .

[20]  I. H. Abbott,et al.  Theory of Wing Sections , 1959 .

[21]  Ervin Bossanyi,et al.  Wind Energy Handbook , 2001 .

[22]  O. Igra,et al.  Compact shrouds for wind turbines , 1977 .

[23]  H. Glauert,et al.  The Elements of Aerofoil and Airscrew Theory: REFERENCES , 1983 .

[24]  van Gjw Gerard Bussel,et al.  The science of making more torque from wind: Diffuser experiments and theory revisited , 2007 .

[25]  Søren Hjort,et al.  A Multi-Element Diffuser Augmented Wind Turbine , 2014 .

[26]  M. Werle,et al.  Ducted Wind/Water Turbines and Propellers Revisited , 2008 .

[27]  Peter Jamieson,et al.  Generalized limits for energy extraction in a linear constant velocity flow field , 2008 .

[28]  H. Glauert.  The elements of aerofoil and airscrew theory , 1926 .

[29]  P. B. S. Lissaman,et al.  Applied Aerodynamics of Wind Power Machines , 1974, Renewable Energy.

[30]  Richard A. Oman,et al.  Investigation of diffuser-augmented wind turbines , 1976 .

[31]  Jie Shen,et al.  An overview of projection methods for incompressible flows , 2006 .

[32]  O. Igra,et al.  Research and development for shrouded wind turbines , 1981 .

[33]  V. Bussel.  An assessment of the performance of diffuser augmented wind turbines (DAWT's) , 1999 .