High temperature behaviour of ambient cured alkali-activated materials based on ladle slag

This paper investigates the thermal properties of alkali activated materials (AAMs) made from ladle slag, a by-product from electric arc furnaces. AAMs have the potential to exhibit improved durability in high temperature environments over conventional materials such as ordinary Portland cement due to a reduced concentration of hydrated phases in their structure. A series of samples with varying compositional ratios was synthesised from a combination of ladle slag and metakaolin or ladle slag and fly ash. Ambient cured AAMs of moderate compressive strengths (between 11 and 46 MPa) were achieved. Samples were exposed to temperatures up to 1000 °C and analysed for residual strength, thermal expansion, phase and microstructural changes. The ladle slag and fly ash based AAMs exhibited superior strength gains and better thermal stability than the ladle slag and metakaolin based AAMs believed to be due to unstable C–A–S–H phases formed in the latter group of samples.

[1]  Jadambaa Temuujin,et al.  Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications , 2011 .

[2]  C. Shi.  Characteristics and cementitious properties of ladle slag fines from steel production , 2002 .

[3]  P. Svoboda,et al.  Assessment of phase formation in alkali activated low and high calcium fly ashes in building materials , 2010 .

[4]  S. Tsivilis,et al.  Properties and hydration of blended cements with steelmaking slag , 2007 .

[5]  J. Temuujin,et al.  Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes. , 2009, Journal of hazardous materials.

[6]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[7]  J. Deventer,et al.  The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation , 2005 .

[8]  Á. Palomo,et al.  Effect of Calcium Additions on N-A-S-H Cementitious Gels , 2010 .

[9]  William D.A. Rickard,et al.  Thermal Character of Geopolymers Synthesized from Class F Fly Ash Containing High Concentrations of Iron and α-Quartz , 2010 .

[10]  Jadambaa Temuujin,et al.  Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition , 2012 .

[11]  John L. Provis,et al.  Carbonate mineral addition to metakaolin-based geopolymers , 2008 .

[12]  M. Weil,et al.  The influence of calcium content on the structure and thermal performance of fly ash based geopolymers , 2007 .

[13]  Á. Palomo,et al.  Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O , 2011 .

[14]  Waltraud M. Kriven,et al.  The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers , 2007 .

[15]  A. Dennison,et al.  Thermal expansion of nepheline–kalsilite crystalline solutions , 2003, Mineralogical Magazine.

[16]  Jadambaa Temuujin,et al.  Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriers , 2009 .

[17]  J. Sanjayan,et al.  Behavior of combined fly ash/slag‐based geopolymers when exposed to high temperatures , 2009 .

[18]  A. Buchwald,et al.  Alkali-activated binders by use of industrial by-products , 2005 .

[19]  Aaron R. Sakulich,et al.  Mechanical and microstructural characterization of an alkali-activated slag/limestone fine aggregate concrete , 2009 .

[20]  Robert Černý,et al.  Thermal Properties of Alkali-activated Slag Subjected to High Temperatures , 2007 .

[21]  Kwesi Sagoe-Crentsil,et al.  Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures , 2007 .

[22]  S. Alonso,et al.  Calorimetric study of alkaline activation of calcium hydroxide–metakaolin solid mixtures , 2001 .

[23]  Gilberto Artioli,et al.  Thermal expansion and phase transitions in åkermanite and gehlenite , 2005 .

[24]  C. Yip,et al.  Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder , 2003 .

[25]  Jadambaa Temuujin,et al.  Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings , 2011 .

[26]  K. MacKenzie,et al.  Structure and mechanical properties of aluminosilicate geopolymer composites with Portland cement and its constituent minerals , 2010 .

[27]  Stefania Manzi,et al.  Mix-design and characterization of alkali activated materials based on metakaolin and ladle slag , 2013 .

[28]  Erich D. Rodríguez,et al.  Mechanical and thermal characterisation of geopolymers based on silicate-activated metakaolin/slag blends , 2011, Journal of Materials Science.

[29]  C. Kaps,et al.  Alkali-activated metakaolin-slag blends—performance and structure in dependence of their composition , 2007 .

[30]  J. Sanjayan,et al.  Residual strength properties of sodium silicate alkali activated slag paste exposed to elevated temperatures , 2010 .

[31]  J. Sanjayan,et al.  Phase transformations and mechanical strength of OPC/Slag pastes submitted to high temperatures , 2007 .

[32]  John L. Provis,et al.  Effect of Calcium Silicate Sources on Geopolymerisation , 2008 .

[33]  P. S. Rogers,et al.  Anisotropic thermal expansion characteristics of wollastonitc , 1976, Mineralogical Magazine.