Improving hook characterization of friction stir lap welded Al alloy joint using a two-section stepped friction pin

[1]  A. Gerlich,et al.  Calculation of welding tool pin width for friction stir welding of thin overlapping sheets , 2018, The International Journal of Advanced Manufacturing Technology.

[2]  S. Ji,et al.  Effect of pin length and welding speed on lap joint quality of friction stir welded dissimilar aluminum alloys , 2018, The International Journal of Advanced Manufacturing Technology.

[3]  M. Shamanian,et al.  Dissimilar friction-stir lap-welding of aluminum-magnesium (AA5052) and aluminum-copper (AA2024) alloys: microstructural evolution and mechanical properties , 2017, The International Journal of Advanced Manufacturing Technology.

[4]  S. Ji,et al.  Improving interface morphology and shear failure load of friction stir lap welding by changing material concentrated zone location , 2018 .

[5]  Jian Cao,et al.  Interface characteristic and tensile property of friction stir lap welding of dissimilar aircraft 2060-T8 and 2099-T83 Al–Li alloys , 2018 .

[6]  D. Rodrigues,et al.  Influence of post-welding heat-treatment on the monotonic and fatigue strength of 6082-T6 friction stir lap welds , 2017 .

[7]  H. Jamshidi Aval,et al.  Orbital friction stir lap welding in tubular parts of aluminium alloy AA5083 , 2017 .

[8]  Zhengwei Li,et al.  Effect of rotating speed on joint morphology and lap shear properties of stationary shoulder friction stir lap welded 6061-T6 aluminum alloy , 2017 .

[9]  H. J. Aval,et al.  Orbital friction stir lap welding in tubular parts of aluminium alloy AA5083 , 2017 .

[10]  W. Zhiguo,et al.  The effect of interface defect on mechanical properties and its formation mechanism in friction stir lap welded joints of aluminum alloys , 2016 .

[11]  S. Gao,et al.  Investigation of vertical compensation friction stir-welded 7N01-T4 aluminum alloy , 2016 .

[12]  Zhengwei Li,et al.  Joint features and mechanical properties of friction stir lap welded alclad 2024 aluminum alloy assisted by external stationary shoulder , 2016 .

[13]  Z. Ma,et al.  Pinless Friction Stir Spot Welding of Mg‒3Al‒1Zn Alloy with Zn Interlayer , 2016 .

[14]  M. Jahazi,et al.  Friction stir lap welding of 5456 aluminum alloy with different sheet thickness: process optimization and microstructure evolution , 2016 .

[15]  S. Kheirandish,et al.  Effect of process parameters on the macrostructure and defect formation in friction stir lap welding of AA5456 aluminum alloy , 2015 .

[16]  Z. Ma,et al.  Influence of Zn interlayer addition on microstructure and mechanical properties of friction stir welded AZ31 Mg alloy , 2015, Journal of Materials Science.

[17]  Huijie Liu,et al.  Microstructural characteristics and mechanical properties of friction stir lap welding joint of Alclad 7B04-T74 aluminum alloy , 2015 .

[18]  L. Cui,et al.  Defect features and mechanical properties of friction stir lap welded dissimilar AA2024–AA7075 aluminum alloy sheets , 2014 .

[19]  P. V. Venkitakrishnan,et al.  Microstructure and Mechanical Properties of Friction Stir Lap Welded Aluminum Alloy AA2014 , 2012 .

[20]  Mohammad Jahazi,et al.  Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy , 2011 .

[21]  Radovan Kovacevic,et al.  Investigation of the Friction Stir Lap Welding of Aluminum Alloys AA 5182 and AA 6022 , 2007 .

[22]  W. M. Thomas,et al.  Friction Skew-stir welding of lap joints in 5083–0 aluminium , 2005 .

[23]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .