Robotic sanding system for new designed furniture with free-formed surface

In this paper, a sanding system based on an industrial robot with a surface following controller is proposed for the sanding process of wooden materials constructing furniture. Handy air-driven tools can be easily attached to the tip of the robot arm via a compact force sensor. The robotic sanding system is called the 3D robot sander. The robot sander has two novel features. One is that the polishing force acting between the tool and wooden workpiece is delicately controlled to track a desired value, e.g., 2kgf. The polishing force is defined as the resultant force of the contact force and kinetic friction force. The other is that no complicated teaching operation is required to obtain a desired trajectory of the tool. Cutter location (CL) data, which are tool paths generated by a CAD/CAM system, are directly used for the basic trajectory of the handy tool attached to the robot arm. The robot sander can be applied to the sanding task of free-formed curved surface with which conventional sanding machines have not been able to cope. The effectiveness and promise are shown and discussed through a few experiments.

[1]  X. Q. Chen,et al.  SMART Robotic System for 3D Profile Turbine Vane Airfoil Repair , 2003 .

[2]  Homayoon Kazerooni,et al.  Automated Robotic Deburring of Parts Using Compliance Control , 1991 .

[3]  Masayoshi Tomizuka,et al.  Control of tool/workpiece contact force with application to robotic deburring , 1985, IEEE J. Robotics Autom..

[4]  Fusaomi Nagata,et al.  Performance test of a force controlled robot sander using a surface following controller based on cutter location data , 2002 .

[5]  Gary M. Bone,et al.  Force Control for Robotic Deburring , 1991 .

[6]  Makoto Jinno,et al.  A Force Controlled Finishing Robot System with a Task-Directed Robot Language , 1995, J. Robotics Mechatronics.

[7]  Homayoon Kazerooni Robotic deburring of two-dimensional parts with unknown geometry , 1988 .

[8]  Fusaomi Nagata,et al.  Furniture polishing robot using a trajectory generator based on cutter location data , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[9]  Yoshimi Takeuchi,et al.  Automated polishing process with a human-like dexterous robot , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[10]  Fusaomi Nagata,et al.  Generalized fuzzy environment models learned with genetic algorithms for a robotic force control , 1999, Proceedings 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human and Environment Friendly Robots with High Intelligence and Emotional Quotients (Cat. No.99CH36289).

[11]  John J. Craig,et al.  Hybrid position/force control of manipulators , 1981 .

[12]  João Figueiredo,et al.  Surface polishing with flexible link manipulators , 1996 .

[13]  Dimitry Gorinevsky,et al.  Force Control of Robotics Systems , 1998 .

[14]  Fusaomi Nagata,et al.  Profiling Control for Industrial Robots Using a Position Compensator Based on Cutter Location Data. , 2000 .

[15]  Neville Hogan,et al.  Impedance Control: An Approach to Manipulation: Part I—Theory , 1985 .

[16]  Fusaomi Nagata,et al.  An experiment on profiling task with impedance controlled manipulator using cutter location data , 1999, IEEE SMC'99 Conference Proceedings. 1999 IEEE International Conference on Systems, Man, and Cybernetics (Cat. No.99CH37028).

[17]  Prabhakar R. Pagilla,et al.  Robotic Surface Finishing Processes: Modeling, Control, and Experiments , 2001 .

[18]  John J. Craig,et al.  Introduction to Robotics Mechanics and Control , 1986 .

[19]  Neville Hogan,et al.  Impedance Control: An Approach to Manipulation , 1984, 1984 American Control Conference.