Gas Recirculation at the Hydrogen Electrode of Solid Oxide Fuel Cell and Solid Oxide Electrolysis Cell Systems

In this study it is theoretically analyzed how flue gas recirculation at the hydrogen electrode of solid oxide cells (SOC) systems effects fuel utilization and carbon formation. Interdepence between cell fuel utilization, system fuel utilization and gas recirculation is investigated numerically. Tendency towards carbon deposits is evaluated via thermodynamic equilibrium calculations. It is quantified which gas recirculation rates are necessary to achieve high values of system fuel utilization even if the cell fuel utilization is kept at a moderate level. Furthermore, tendency towards carbon deposition strongly depends on temperature, pressure and feed gas composition and can be reduced by adequate recirculation rates. The presented results can be used for the configuration of gas recirculation in SOC systems.

[1]  Reinhard Leithner,et al.  Efficiency gain of solid oxide fuel cell systems by using anode offgas recycle Results for a small , 2011 .

[2]  Yohei Tanaka,et al.  Development of Anode Off-Gas Recycle Blowers for High Efficiency SOFC Systems , 2013 .

[3]  Ludger Blum,et al.  Analysis of solid oxide fuel cell system concepts with anode recycling , 2013 .

[4]  Florian Leucht,et al.  Fuel cell system modeling for solid oxide fuel cell/gas turbine hybrid power plants, Part I: Modeling and simulation framework , 2011 .

[5]  S. Kær,et al.  Influence of anodic gas recirculation on solid oxide fuel cells in a micro combined heat and power system , 2014 .

[6]  Loredana Magistri,et al.  Ejector performance influence on a solid oxide fuel cell anodic recirculation system , 2004 .

[7]  Josef Kallo,et al.  Influence of Pressurisation on SOFC Performance and Durability: A Theoretical Study , 2011 .

[8]  Ludger Blum,et al.  Analysis of a Solid Oxide Fuel Cell System with Low Temperature Anode Off-Gas Recirculation , 2015 .

[9]  Jan Pawel Stempien,et al.  Performance of power generation extension system based on solid-oxide electrolyzer cells under various design conditions , 2013 .

[10]  Tae Seok Lee,et al.  Design and optimization of a combined fuel reforming and solid oxide fuel cell system with anode off-gas recycling , 2011 .

[11]  A. Lanzini,et al.  Residential Solid Oxide Fuel Cell Generator Fuelled by Ethanol: Cell, Stack and System Modelling with a Preliminary Experiment , 2010 .

[12]  Tohru Kato,et al.  Improvement of Electrical Efficiency of Solid Oxide Fuel Cells by Anode Gas Recycle , 2011 .

[13]  Michael Reissig,et al.  AVL SOFC Systems on the Way of Industrialization , 2013 .

[14]  Andrea Lanzini,et al.  Anode recirculation behavior of a solid oxide fuel cell system: A safety analysis and a performance optimization , 2013 .

[15]  Changyun Wen,et al.  Anode gas recirculation behavior of a fuel ejector in hybrid solid oxide fuel cell systems: Performance evaluation in three operational modes , 2008 .

[16]  Ludger Blum,et al.  Comparison of a fuel-driven and steam-driven ejector in solid oxide fuel cell systems with anode off-gas recirculation: Part-load behavior , 2015 .

[17]  Roberto Bove,et al.  Analysis of a solid oxide fuel cell system for combined heat and power applications under non-nominal conditions , 2007 .

[18]  L. A. Chick,et al.  Demonstration of a highly efficient solid oxide fuel cell power system using adiabatic steam reforming and anode gas recirculation , 2012 .

[19]  Reinhard Leithner,et al.  SOFC System Using a Hot Gas Ejector for Offgas Recycling for High Efficient Power Generation from Propane , 2013 .