Study of plasma nitriding and nitrocarburizing for higher corrosion resistance and hardness of 2205 duplex stainless steel

[1]  S. Tjong,et al.  Effect of Secondary Phase Precipitation on the Corrosion Behavior of Duplex Stainless Steels , 2014, Materials.

[2]  A. Volinsky,et al.  Ferrite and austenite phase identification in duplex stainless steel using SPM techniques , 2013 .

[3]  C. Alves,et al.  Cathodic cage plasma nitriding of austenitic stainless steel (AISI 316): influence of the working pressure on the nitrided layers properties , 2013 .

[4]  A. P. Tschiptschin,et al.  Low-temperature plasma nitriding of AISI F51 duplex stainless steel , 2013 .

[5]  K. Ou,et al.  Improvement on hardness and corrosion resistance of ferritic stainless steel via PVD-(Ti,Cr)N coatings , 2013 .

[6]  Insup Lee.  Effects of Processing Temperatures on the Characteristics of the Surface Hardened Layer Produced on Duplex Stainless Steel by Low Temperature Plasma Nitrocarburizing , 2013 .

[7]  S. Mukherjee,et al.  Effect of alloyed molybdenum on corrosion behavior of plasma immersion nitrogen ion implanted austenitic stainless steel , 2013 .

[8]  Ricardo P Nogueira,et al.  Influence of Mo alloying on pitting corrosion of stainless steels used as concrete reinforcement , 2013 .

[9]  M. Ismail,et al.  Behavior of Carbon and Nitrogen after Low Temperature Thermochemical Treatment on Austenitic and Duplex Stainless Steel , 2011 .

[10]  H. Spies,et al.  Nitrierung und Nitrocarburierung nichtrostender ferritischer Stähle , 2011 .

[11]  F. Serbena,et al.  Mechanical and Tribological Properties of LDX2101 Duplex Stainless Steel Submitted to Glow Discharge Ion Nitriding , 2011, IEEE Transactions on Plasma Science.

[12]  Yong Sun.  Corrosion behaviour of low temperature plasma carburised 316L stainless steel in chloride containing solutions , 2010 .

[13]  Heng Chang,et al.  Microstructure and Properties of Active Screen Plasma Nitrided Duplex Stainless Steel , 2010 .

[14]  J. Baranowska,et al.  Formation of nitrided layers on duplex steel – influence of multiphase substrate , 2010 .

[15]  S. Mukherjee,et al.  Dry sliding wear behaviour of plasma nitrocarburised AISI 304 stainless steel using response surface methodology , 2010 .

[16]  T. Christiansen,et al.  Stress and Composition of Carbon Stabilized Expanded Austenite on Stainless Steel , 2009 .

[17]  F. Sommer,et al.  Abnormal Austenite-Ferrite Transformation Kinetics of Ultra-Low-Nitrogen Fe-N Alloy , 2008 .

[18]  E. Haruman,et al.  Influence of processing conditions on structural characteristics of hybrid plasma surface alloyed austenitic stainless steel , 2008 .

[19]  J. Flis,et al.  Corrosion and passivation of low-temperature nitrided AISI 304L and 316L stainless steels in acidified sodium sulphate solution , 2008 .

[20]  S. Mukherjee,et al.  Effect of plasma immersion ion implantation of nitrogen on the wear and corrosion behavior of 316LVM stainless steel , 2007 .

[21]  M. Robinson,et al.  Erosion–corrosion of 2205 duplex stainless steel in flowing seawater containing sand particles , 2007 .

[22]  C. Li,et al.  Corrosion properties of plasma nitrided AISI 410 martensitic stainless steel in 3.5% NaCl and 1% HCl aqueous solutions , 2006 .

[23]  J. Baranowska,et al.  Microstructure and properties of layers on chromium steel , 2006 .

[24]  F. Borgioli,et al.  Corrosion resistance properties of glow-discharge nitrided AISI 316L austenitic stainless steel in NaCl solutions , 2006 .

[25]  Yong Sun.  Hybrid plasma surface alloying of austenitic stainless steels with nitrogen and carbon , 2005 .

[26]  C. Li,et al.  Low temperature plasma nitrocarburising of AISI 316 austenitic stainless steel , 2005 .

[27]  J. Baranowska,et al.  Protective Nitrided Layers on Ferrite-Austenite Chromium Steel , 2005 .

[28]  C. Li,et al.  Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel , 2004 .

[29]  A. Çelik,et al.  Effect of process time on structural and tribological properties of ferritic plasma nitrocarburized AISI 4140 steel , 2004 .

[30]  F. El-Hossary,et al.  Effect of N2 to C2H2 ratio on r.f. plasma surface treatment of austenitic stainless steel , 2003 .

[31]  J. Yang,et al.  Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel , 2002 .

[32]  Y. Corre,et al.  Solutions to improve surface hardness of stainless steels without loss of corrosion resistance , 2002 .

[33]  Y. Katada,et al.  Role of nitrogen on the corrosion behavior of austenitic stainless steels , 2002 .

[34]  A. Klein,et al.  Surface porosity sealing effect of plasma nitrocarburizing on sintered unalloyed iron , 2001 .

[35]  Ø. Grong,et al.  A process model for the heat-affected zone microstructure evolution in duplex stainless steel weldments: Part II. Application to electron beam welding , 2000 .

[36]  J. Mankowski,et al.  Elemental composition and corrosion resistance of plasma nitrided stainless steels , 2000 .

[37]  H. Spies,et al.  Plasma nitriding of stainless steels at low temperatures , 1999 .

[38]  R. Jargelius-Pettersson.  Electrochemical investigation of the influence of nitrogen alloying on pitting corrosion of austenitic stainless steels , 1999 .

[39]  J. Mankowski,et al.  Surface films on plasma nitrided stainless steel subjected to passivation treatments , 1999 .

[40]  S. Wolynec,et al.  Comparison Between Potentiodynamic and Potentiostatic Tests for Pitting Potential Measurement of Duplex Stainless Steels , 1999 .

[41]  V. Gavriljuk,et al.  High nitrogen steels , 1999 .

[42]  V. S. Raja,et al.  Influence of nitrogen on the pitting corrosion behavior of 904L weld clad , 1998 .

[43]  N. Yasumaru.  Low-Temperature Ion Nitriding of Austenitic Stainless Steels , 1998 .

[44]  H. Isaacs,et al.  Dissolution characteristics of duplex stainless steels in acidic environments , 1998 .

[45]  M. Pohl,et al.  Effect of plasma nitriding on wear and pitting corrosion resistance of X2 CrNiMoN 22 5 3 duplex stainless steel , 1998 .

[46]  A. Weisheit,et al.  Plasma immersion ion implantation of stainless steel: austenitic stainless steel in comparison to austenitic-ferritic stainless steel , 1996 .

[47]  I. Olefjord,et al.  The influence of nitrogen on the passivation of stainless steels , 1996 .

[48]  K. Rie,et al.  Structure and properties of plasma-nitrided stainless steel , 1995 .

[49]  P. Pistorius,et al.  Surface Roughness and the Metastable Pitting of Stainless Steel in Chloride Solutions , 1995 .

[50]  H. Shih,et al.  The Effect of Nitrogen on the Corrosion of Plasma-Nitrided 4140 Steel , 1991 .

[51]  D. Márton,et al.  On the development of increasing surface roughness during ion sputtering , 1987 .

[52]  T. Bell,et al.  Structure and Corrosion Resistance of Plasma Nitrided Stainless Steel , 1985, Stainless Steel 2000.