Multifunctional reconfigurable MEMS integrated antennas for adaptive MIMO systems

Multi-input multi-output systems with associated technologies such as smart antennas and adaptive coding and modulation techniques enhance channel capacity, diversity, and robustness of wireless communications as has been proven by many recent research results both in theory and experiments. This article focuses on the antenna aspect of MIMO systems. In particular, we emphasize the important role of the reconfigurable antenna and its links with space-time coding techniques that can be employed for further exploitation of the theoretical performance of MIMO wireless systems. The advantages of the reconfigurable antenna compared to the traditional smart antenna are discussed. Establishment of reconfigurable antennas requires novel radio frequency microelectromechanical systems technology, which has recently been developed in the authors' group. We briefly introduce this technology with emphasis on its distinct advantages over existing silicon-based MEMS technologies for reconfigurable antennas. A reconfigurable antenna design that can change its operating frequency and radiation/polarization characteristics is described. Finally, we present the experimental and theoretical results from impedance and radiation performance characterization for different antenna configurations.

[1]  Reinaldo A. Valenzuela,et al.  Keyholes, correlations, and capacities of multielement transmit and receive antennas , 2002, IEEE Trans. Wirel. Commun..

[2]  Hamid Jafarkhani,et al.  Combining beamforming and quasi-orthogonal space-time block coding using channel mean feedback , 2003, GLOBECOM '03. IEEE Global Telecommunications Conference (IEEE Cat. No.03CH37489).

[3]  Donald C. Cox,et al.  Effect of antenna polarization on the capacity of a multiple element system in an indoor environment , 2002, IEEE J. Sel. Areas Commun..

[4]  Robert W. Heath,et al.  Adaptive modulation and MIMO coding for broadband wireless data networks , 2002, IEEE Commun. Mag..

[5]  S. Eshelman,et al.  Micromachined low-loss microwave switches , 1999 .

[6]  Bedri A. Cetiner,et al.  Miniature multi-element antenna for wireless communications , 2002 .

[7]  Hamid Jafarkhani,et al.  A quasi-orthogonal space-time block code , 2000, 2000 IEEE Wireless Communications and Networking Conference. Conference Record (Cat. No.00TH8540).

[8]  M.A. Jensen,et al.  Antenna selection for MIMO systems based on information theoretic considerations , 2003, IEEE Antennas and Propagation Society International Symposium. Digest. Held in conjunction with: USNC/CNC/URSI North American Radio Sci. Meeting (Cat. No.03CH37450).

[9]  Hamid Jafarkhani,et al.  Application of quasi-orthogonal space-time block codes in beamforming , 2005, IEEE Transactions on Signal Processing.

[10]  Helmut Bölcskei,et al.  Performance of multiantenna signaling techniques in the presence of polarization diversity , 2002, IEEE Trans. Signal Process..

[11]  F. De Flaviis,et al.  RF MEMS switches fabricated on microwave-laminate printed circuit boards , 2003, IEEE Electron Device Letters.

[12]  Mikael Skoglund,et al.  Combining beamforming and orthogonal space-time block coding , 2002, IEEE Trans. Inf. Theory.

[13]  Guann-Pyng Li,et al.  Monolithic integration of RF MEMS switches with a diversity antenna on PCB substrate , 2003 .