Non-isothermal finite element modeling of a shape memory alloy actuator using ANSYS

Abstract Many applications involve actuated devices made of shape memory alloys, but the lack of efficient numerical tools hinders the development of such technologies. Software using a finite element method like ANSYS allows the user to predict complex responses of a system without extensive programming. In this paper, a homemade phenomenological 1D bilinear model is programmed through the USERMAT procedure in ANSYS. The model allows the representation of both mechanical and thermal hystereses. The martensitic transformation is controlled by transformation criteria similar to those used in conventional plasticity, and subcycles are modeled by a simple elastic return through the hysteresis. The model is validated through isothermal tensile testing, assisted two-way shape memory testing and stress generation testing, and a good agreement with experimental results is shown. Finally, thermomechanical response of a single-degree-of-freedom actuator is simulated as a typical application and a case study involving the shape change of a radio controlled aircraft wing shows the potential of the numerical simulations.

[1]  Huibin Xu,et al.  On the pseudo-elastic hysteresis , 1991 .

[2]  E. Sacco,et al.  A temperature-dependent beam for shape-memory alloys: Constitutive modelling, finite-element implementation and numerical simulations , 1999 .

[3]  Ferdinando Auricchio,et al.  Shape-memory alloys: modelling and numerical simulations of the finite-strain superelastic behavior , 1997 .

[4]  Patrick Terriault,et al.  Application of Dual Kriging to the Construction of a General Phenomenological Material Law for Shape Memory Alloys , 1997 .

[5]  Vladimir Brailovski,et al.  Shape memory alloys : fundamentals, modeling and applications , 2003 .

[6]  D. Lagoudas,et al.  A UNIFIED THERMODYNAMIC CONSTITUTIVE MODEL FOR SMA AND FINITE ELEMENT ANALYSIS OF ACTIVE METAL MATRIX COMPOSITES , 1996 .

[7]  E. Patoor,et al.  Thermomechanical behaviour of shape memory alloys , 1988 .

[8]  Seung-Bok Choi,et al.  Force tracking control of a flexible gripper featuring shape memory alloy actuators , 2001 .

[9]  Qingping Sun,et al.  Micromechanics modelling for the constitutive behavior of polycrystalline shape memory alloys. I: Derivation of general relations , 1993 .

[10]  Dirk Helm,et al.  Thermomechanical behavior of shape memory alloys , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[11]  Ferdinando Auricchio,et al.  A robust integration-algorithm for a finite-strain shape-memory-alloy superelastic model , 2001 .

[12]  Dominiek Reynaerts,et al.  An implantable drug-delivery system based on shape memory alloy micro-actuation , 1997 .

[13]  Ferdinando Auricchio,et al.  Shape memory alloy superelastic behavior: 3D finite-element simulations , 1996, Other Conferences.

[14]  Arianna Menciassi,et al.  A SMA-actuated miniature pressure regulator for a miniature robot for colonoscopy , 2003 .

[15]  François Trochu,et al.  Nonlinear finite element simulation of superelastic shape memory alloy parts , 1997 .

[16]  Deborah Brandon,et al.  Constitutive Laws for Pseudo-Elastic Materials , 1992 .

[17]  K. Tanaka.  A THERMOMECHANICAL SKETCH OF SHAPE MEMORY EFFECT: ONE-DIMENSIONAL TENSILE BEHAVIOR , 1986 .

[18]  K. Bathe.  Finite Element Procedures , 1995 .