Evaluation of secondary formation damage caused by the interaction of chelated barite with formation rocks during filter cake removal

[1]  Jun Yao,et al.  Microscopic Determination of Remaining Oil Distribution in Sandstones With Different Permeability Scales Using Computed Tomography Scanning , 2019, Journal of Energy Resources Technology.

[2]  Jianchao Cai,et al.  Laboratory Investigation Into the Formation and Dissociation Process of Gas Hydrate by Low‐Field NMR Technique , 2018 .

[3]  Jun Yao,et al.  Pore-scale remaining oil distribution under different pore volume water injection based on CT technology , 2017 .

[4]  Martin J Blunt,et al.  X‐ray Microtomography of Intermittency in Multiphase Flow at Steady State Using a Differential Imaging Method , 2017, Water resources research.

[5]  Mohamed E. Kandil,et al.  Measurements of electrical resistivity, NMR pore size and distribution, and x-ray CT-scan for performance evaluation of CO2 injection in carbonate rocks: A pilot study , 2017 .

[6]  M. Mahmoud.  New Formulation for Sandstone Acidizing That Eliminates Sand Production Problems in Oil and Gas Sandstone Reservoirs , 2017 .

[7]  S. Elkatatny,et al.  Modeling of Filter Cake Composition in Maximum Reservoir Contact and Extended Reach Horizontal Wells in Sandstone Reservoirs , 2017 .

[8]  R. Shawabkeh,et al.  Water Base Barite Filter Cake Removal Using Non-Corrosive Agents , 2017 .

[9]  R. Shawabkeh,et al.  Evaluation of Barium Sulfate (Barite) Solubility Using Different Chelating Agents at a High Temperature , 2017 .

[10]  R. Shawabkeh,et al.  Single stage filter cake removal of barite weighted water based drilling fluid , 2017 .

[11]  Fujian Zhou,et al.  Formation Damage due to Drilling and Fracturing Fluids and Its Solution for Tight Naturally Fractured Sandstone Reservoirs , 2017 .

[12]  M. Jin,et al.  Cl− as a Chemical Fingerprint of Solute Transport in the Aquitard-Aquifer System of the North Jiangsu Coastal Plain, China , 2017 .

[13]  M. Mahmoud,et al.  Evaluation of Rock Mechanical Properties Alteration During Matrix Stimulation With Chelating Agents , 2016 .

[14]  M. Mahmoud,et al.  Effect of Sand Content on the Filter Cake Properties and Removal During Drilling Maximum Reservoir Contact Wells in Sandstone Reservoir , 2016 .

[15]  M. Mahmoud,et al.  Filter Cake Porosity and Permeability Profile Along the Horizontal Well and Their Impact on Filter Cake Removal , 2015 .

[16]  Chenchen Wang,et al.  New pore space characterization method of shale matrix formation by considering organic and inorganic pores , 2015 .

[17]  A. Adebayo,et al.  An Experimental Investigation of the Use of Combined Resistivity and Temperature Logs for Scale Monitoring In Carbonate Formations During CO2 Sequestration , 2015 .

[18]  Michael L. Johns,et al.  Pore-scale analysis of formation damage in Bentheimer sandstone with in-situ NMR and micro-computed tomography experiments , 2015 .

[19]  H. Nasr-El-Din,et al.  Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan , 2013 .

[20]  Daoyong Yang,et al.  Determination of Residual Oil Distribution during Waterflooding in Tight Oil Formations with NMR Relaxometry Measurements , 2013 .

[21]  M. Mahmoud,et al.  A New Diversion Technique to Remove the Formation Damage from Maximum Reservoir Contact and Extended Reach Wells in Sandstone Reservoirs , 2013 .

[22]  B. Bageri,et al.  Different Techniques for Characterizing the Filter Cake , 2013 .

[23]  Yanbin Yao,et al.  Comparison of low-field NMR and mercury intrusion porosimetry in characterizing pore size distributions of coals , 2012 .

[24]  Arild Saasen,et al.  The Effect of Drilling Fluid Rheological Properties on Hole Cleaning , 2002 .

[25]  P. Cerasi,et al.  Measurement of the Mechanical Properties of Filtercakes , 2001 .

[26]  Fredd,et al.  The Influence of Chelating Agents on the Kinetics of Calcite Dissolution. , 1998, Journal of colloid and interface science.

[27]  Richard M. Hodge,et al.  Evaluation and Selection of Drill-In-Fluid Candidates To Minimize Formation Damage , 1997 .

[28]  J. Argillier,et al.  Correlation between filter cake structure and filtration properties of model drilling fluids , 1995 .

[29]  Zara Khatib,et al.  Prediction of Formation Damage Due to Suspended Solids: Modeling Approach of Filter Cake Buildup in Injectors , 1994 .

[30]  M. Chenevert,et al.  Filter Cake Structure Analysis Using the Scanning Electron Microscope , 1991 .

[31]  A. Hartmann,et al.  Analysis of Mudcake Structures Formed Under Simulated Borehole Conditions , 1988 .

[32]  Keith K. Millheim,et al.  Applied Drilling Engineering , 1986 .

[33]  B. R. Hassen.  New Technique Estimates Drilling Filtrate Invasion , 1980 .

[34]  L. Robinson,et al.  Solids Control in Weighted Drilling Fluids , 1975 .