A survey of formal methods for determining functional joint axes.

Axes of rotation e.g. at the knee, are often generated from clinical gait analysis data to be used in the assessment of kinematic abnormalities, the diagnosis of disease, or the ongoing monitoring of a patient's condition. They are additionally used in musculoskeletal models to aid in the description of joint and segment kinematics for patient specific analyses. Currently available methods to describe joint axes from segment marker positions share the problem that when one segment is transformed into the coordinate system of another, artefacts associated with motion of the markers relative to the bone can become magnified. In an attempt to address this problem, a symmetrical axis of rotation approach (SARA) is presented here to determine a unique axis of rotation that can consider the movement of two dynamic body segments simultaneously, and then compared its performance in a survey against a number of previously proposed techniques. Using a generated virtual joint, with superimposed marker error conditions to represent skin movement artefacts, fitting methods (geometric axis fit, cylinder axis fit, algebraic axis fit) and transformation techniques (axis transformation technique, mean helical axis, Schwartz approach) were classified and compared with the SARA. Nearly all approaches were able to estimate the axis of rotation to within an RMS error of 0.1cm at large ranges of motion (90 degrees ). Although the geometric axis fit produced the least RMS error of approximately 1.2 cm at lower ranges of motion (5 degrees ) with a stationary axis, the SARA and Axis Transformation Technique outperformed all other approaches under the most demanding marker artefact conditions for all ranges of motion. The cylinder and algebraic axis fit approaches were unable to compute competitive AoR estimates. Whilst these initial results using the SARA are promising and are fast enough to be determined "on-line", the technique must now be proven in a clinical environment.

[1]  Todd Johnson,et al.  Biomechanics of Posterior-Substituting Total Knee Arthroplasty: An In Vitro Study , 2002, Clinical orthopaedics and related research.

[2]  A. Lundberg,et al.  A new method for estimating the axis of rotation and the center of rotation. , 1999, Journal of biomechanics.

[3]  H. Rubash,et al.  Sensitivity of the knee joint kinematics calculation to selection of flexion axes. , 2004, Journal of biomechanics.

[4]  Sahan Gamage,et al.  New least squares solutions for estimating the average centre of rotation and the axis of rotation. , 2002, Journal of biomechanics.

[5]  Masao Akagi,et al.  The functional flexion-extension axis of the knee corresponds to the surgical epicondylar axis: in vivo analysis using a biplanar image-matching technique. , 2005, The Journal of arthroplasty.

[6]  Ludo Verhoeven,et al.  Part 1: Theoretical Background , 1987 .

[7]  Dan K Ramsey,et al.  Effect of skin movement artifact on knee kinematics during gait and cutting motions measured in vivo. , 2005, Gait & posture.

[8]  E V Biryukova,et al.  Kinematics of human arm reconstructed from spatial tracking system recordings. , 2000, Journal of biomechanics.

[9]  B. Beynnon,et al.  The Transepicondylar Axis Approximates the Optimal Flexion Axis of the Knee , 1998, Clinical orthopaedics and related research.

[10]  A. Cappozzo,et al.  Human movement analysis using stereophotogrammetry. Part 3. Soft tissue artifact assessment and compensation. , 2005, Gait & posture.

[11]  Hanna Schell,et al.  On the influence of soft tissue coverage in the determination of bone kinematics using skin markers , 2005, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[12]  Joan Lasenby,et al.  A real-time sequential algorithm for human joint localization , 2005, SIGGRAPH '05.

[13]  Angelo Cappello,et al.  Quantification of soft tissue artefact in motion analysis by combining 3D fluoroscopy and stereophotogrammetry: a study on two subjects. , 2005, Clinical biomechanics.

[14]  H E Veeger,et al.  Determination of the optimal elbow axis for evaluation of placement of prostheses. , 1999, Clinical biomechanics.

[15]  A. Cappozzo,et al.  Human movement analysis using stereophotogrammetry. Part 1: theoretical background. , 2005, Gait & posture.

[16]  P R Cavanagh,et al.  Three-dimensional kinematics of the human knee during walking. , 1992, Journal of biomechanics.

[17]  J J O'Connor,et al.  Bone position estimation from skin marker co-ordinates using global optimisation with joint constraints. , 1999, Journal of biomechanics.

[18]  F. Veldpaus,et al.  Finite centroid and helical axis estimation from noisy landmark measurements in the study of human joint kinematics. , 1985, Journal of biomechanics.

[19]  Christopher L. Vaughan,et al.  Dynamics of human gait , 1992 .

[20]  Kjartan Halvorsen,et al.  Model-Based Methods in Motion Capture , 2002 .

[21]  T P Andriacchi,et al.  Correcting for deformation in skin-based marker systems. , 2001, Journal of biomechanics.

[22]  W. Taylor,et al.  A survey of formal methods for determining the centre of rotation of ball joints. , 2006, Journal of biomechanics.

[23]  R. J. Pawluk,et al.  Glenohumeral mechanics: a study of articular geometry, contact, and kinematics. , 2001, Journal of shoulder and elbow surgery.

[24]  Jessica K. Hodgins,et al.  Automatic Joint Parameter Estimation from Magnetic Motion Capture Data , 2023, Graphics Interface.

[25]  G. Bergmann,et al.  Musculo-skeletal loading conditions at the hip during walking and stair climbing. , 2001, Journal of biomechanics.

[26]  Jaco F Schutte,et al.  Determination of patient-specific multi-joint kinematic models through two-level optimization. , 2005, Journal of biomechanics.

[27]  Anthony G Schache,et al.  Defining the knee joint flexion-extension axis for purposes of quantitative gait analysis: an evaluation of methods. , 2006, Gait & posture.

[28]  G. Ferrigno,et al.  Derivation of Centers and Axes of Rotation for Wrist and Fingers in a Hand Kinematic Model: Methods and Reliability Results , 2005, Annals of Biomedical Engineering.

[29]  M. Schwartz,et al.  A new method for estimating joint parameters from motion data. , 2004, Journal of biomechanics.

[30]  Ahmet Erdemir,et al.  Assessment of the functional method of hip joint center location subject to reduced range of hip motion. , 2004, Journal of biomechanics.

[31]  Craig M. Shakarji,et al.  Least-Squares Fitting Algorithms of the NIST Algorithm Testing System , 1998, Journal of research of the National Institute of Standards and Technology.

[32]  S Holzreiter,et al.  Calculation of the instantaneous centre of rotation for a rigid body. , 1991, Journal of biomechanics.

[33]  G Bergmann,et al.  Direct comparison of calculated hip joint contact forces with those measured using instrumented implants. An evaluation of a three-dimensional mathematical model of the lower limb. , 2003, Journal of biomechanics.

[34]  Aurelio Cappozzo,et al.  An optimized protocol for hip joint centre determination using the functional method. , 2006, Journal of biomechanics.

[35]  S. Piazza,et al.  Measurement of the screw-home motion of the knee is sensitive to errors in axis alignment. , 2000, Journal of biomechanics.

[36]  David G Lloyd,et al.  Repeatability of gait data using a functional hip joint centre and a mean helical knee axis. , 2003, Journal of biomechanics.

[37]  Pedro Melo-Pinto,et al.  Effect of skin movement on the analysis of hindlimb kinematics during treadmill locomotion in rats , 2006, Journal of Neuroscience Methods.

[38]  T P Andriacchi,et al.  A point cluster method for in vivo motion analysis: applied to a study of knee kinematics. , 1998, Journal of biomechanical engineering.