Abstract.The methodto compute gait cycle forces and moments acting on the hip and knee joints of a lower limb with a trans-femoral prosthesis were investigated. A 3D model of the lower limb with prosthesis was created using CAD software and based on MRI data and real size dimension. The transfemoral prosthesis was modelled as a coupled of links with two revolution joints at hip and knee joint. This coupled link was connected to a bar with translation joint to description the distance walked of people in gait cycle. All parts of the prosthesis were measured and a full-size 3D model was created.The kinematics parameters of a lower limb with a prosthesis were determined from motion-captured system data. The reaction force was measured with a force sensor in the footplate. The 3D model of the prosthesis was exported to MatlabSimmechanics. The input data which are kinematic parameters were applied to calculate the forces and moments acting on the joints. The results of this study present a method to analyse the dynamic properties of transfemoral prosthesis including speed of the gait. It could be used to calculate the load transferred from the socket to the residual limb. They could also be used to design the structure of a prosthesis and optimize the dynamic characteristics of such a prosthesis.
[1]
W. Lee,et al.
Load transfer mechanics between trans-tibial prosthetic socket and residual limb--dynamic effects.
,
2004,
Journal of biomechanics.
[2]
Hassan Zohoor,et al.
A Robotic Model of Transfemoral Amputee Locomotion for Design Optimization of Knee Controllers
,
2013
.
[3]
N. Unwin,et al.
Epidemiology of lower extremity amputation in centres in Europe, North America and East Asia
,
2000,
The British journal of surgery.
[4]
M Zhang,et al.
Finite element modelling of a residual lower-limb in a prosthetic socket: a survey of the development in the first decade.
,
1998,
Medical engineering & physics.