Nanoindentation Study of Yielding and Plasticity of Poly(methyl methacrylate)

In this study, an experimental approach is used to characterize the geometrical and micromechanical properties of the shear transformation zones (STZs) in glassy polymers. Nanoindentation experiments have been conducted on both as-cast and annealed poly(methyl methacrylate) (PMMA) at different strain rates and temperatures, utilizing continuous stiffness measurement (CSM) technique at room temperature indentations, and conventional loading rate control method for nanoindentations at elevated temperatures. Employing a homogeneous flow theory for analyzing the experimental data, the geometrical properties of the STZs are observed to be almost independent of the thermal history of the samples. While the transformation shear strain of the STZ in PMMA is found to be slightly smaller than that in glassy metals, the size of the STZ in this polymer is shown to be at least 10 times of that in metallic glasses. On the other hand, the activation energy of a single STZ is found to change drastically with annealing. I...

[1]  J. D. Eshelby The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[2]  Frans Spaepen,et al.  A microscopic mechanism for steady state inhomogeneous flow in metallic glasses , 1977 .

[3]  T. Nieh,et al.  Thermal activation in Au-based bulk metallic glass characterized by high-temperature nanoindentation , 2007 .

[4]  Mingwei Chen,et al.  Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses , 2008, Proceedings of the National Academy of Sciences.

[5]  S. N. Rudnev,et al.  Plastic deformation and performance of engineering polymer materials , 1995 .

[6]  Plastic deformation of glassy polymers: correlation between shear activation volume and entanglement density , 2003 .

[7]  S. N. Rudnev,et al.  Evolution in concepts concerning the mechanism of plasticity in solid polymers after the 1950s , 2007 .

[8]  Mary C. Boyce,et al.  Mechanics of the rate-dependent elastic¿plastic deformation of glassy polymers from low to high strain rates , 2006 .

[9]  T. Hufnagel,et al.  Mechanical behavior of amorphous alloys , 2007 .

[10]  A. Argon Plastic deformation in metallic glasses , 1979 .

[11]  A. Argon The Physics of Deformation and Fracture of Polymers: Linear viscoelasticity of polymers , 2013 .

[12]  A. Argon A theory for the low-temperature plastic deformation of glassy polymers , 1973 .

[13]  John S. Villarrubia,et al.  Nanoindentation of polymers: an overview , 2001 .

[14]  G. P. Tandon,et al.  The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites , 1984 .

[15]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[16]  Mary C. Boyce,et al.  Monte Carlo Modeling of Amorphous Polymer Deformation: Evolution of Stress with Strain , 1999 .

[17]  I. Ward Review: The yield behaviour of polymers , 1971 .

[18]  R. E. Robertson,et al.  Theory for the Plasticity of Glassy Polymers , 1966 .

[19]  A. López,et al.  Determination of the activation energies for α and β transitions of a system containing a diglycidyl ether of bisphenol a (DGEBA) and 1,3-bisaminomethylcyclohexane (1,3-BAC) , 1994 .

[20]  R. Hoy,et al.  Effect of Particle Size, Temperature, and Deformation Rate on the Plastic Flow and Strain Hardening Response of PMMA Composites , 2013 .

[21]  Takashi Kashiwagi,et al.  Thermal and oxidative degradation of poly(methyl methacrylate): weight loss , 1985 .

[22]  G. Voyiadjis,et al.  Strain gradient plasticity for amorphous and crystalline polymers with application to micro- and nano-scale deformation analysis , 2014 .

[23]  F. Farahmand,et al.  An analytical approach to study the intraoperative fractures of femoral shaft during total hip arthroplasty. , 2013, Journal of biomechanical engineering.

[24]  S. Piccarolo,et al.  Mechanical Characterization of Polymers on a Nanometer Scale through Nanoindentation. A Study on Pile-up and Viscoelasticity , 2007 .

[25]  A. Argon,et al.  Atomistic modelling of plastic deformation of glassy polymers , 1993 .

[26]  G. Stoclet,et al.  Strain-Induced Molecular Ordering in Polylactide upon Uniaxial Stretching , 2010 .

[27]  K. Schweizer,et al.  Theory of Yielding, Strain Softening, and Steady Plastic Flow in Polymer Glasses under Constant Strain Rate Deformation , 2011 .

[28]  Christopher A. Schuh,et al.  A nanoindentation study of serrated flow in bulk metallic glasses , 2003 .

[29]  N. G. Mccrum,et al.  Internal friction in stereoregular polymethyl methacrylate , 1961 .

[30]  M. Dokukin,et al.  On the Measurements of Rigidity Modulus of Soft Materials in Nanoindentation Experiments at Small Depth , 2012 .

[31]  T. Nieh,et al.  New regime of homogeneous flow in the deformation map of metallic glasses: elevated temperature nanoindentation experiments and mechanistic modeling , 2004 .

[32]  B. Bhushan,et al.  A Review of Nanoindentation Continuous Stiffness Measurement Technique and Its Applications , 2002 .

[33]  H. Bai,et al.  Relating activation of shear transformation zones to β relaxations in metallic glasses , 2010 .

[34]  B. D. Fabes,et al.  The relationship between indentation and uniaxial creep in amorphous selenium , 1995 .

[35]  Kenneth S. Schweizer,et al.  Microscopic Constitutive Equation Theory for the Nonlinear Mechanical Response of Polymer Glasses , 2008 .

[36]  I. N. Sneddon The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .

[37]  Henry Eyring,et al.  Theory of Non‐Newtonian Flow. I. Solid Plastic System , 1955 .

[38]  Mary C. Boyce,et al.  An investigation of the yield and postyield behavior and corresponding structure of poly(methyl methacrylate) , 1993 .

[39]  A. Argon,et al.  Plastic deformation in polyimides, with new implications on the theory of plastic deformation of glassy polymers , 1977 .

[40]  Lallit Anand,et al.  A theory of amorphous solids undergoing large deformations, with application to polymeric glasses , 2003 .

[41]  Dongil Kwon,et al.  Influence of surface-roughness on indentation size effect , 2007 .

[42]  D. Radić,et al.  Dielectric relaxation properties of poly(dimethylphenyl methacrylate)s , 1994 .

[43]  Mary C. Boyce,et al.  Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers , 1995 .

[44]  M. Boyce,et al.  Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model , 1988 .

[45]  Hossein M. Shodja,et al.  Interacting cracks and ellipsoidal inhomogeneities by the equivalent inclusion method , 2003 .

[46]  W. Oliver,et al.  The Dynamics of Frequency-Specific, Depth-Sensing Indentation Testing , 1998 .

[47]  U. Ramamurty,et al.  Pressure sensitive flow and constraint factor in amorphous materials below glass transition , 2009 .

[48]  Guang-Ping Zhang,et al.  On rate-dependent serrated flow behavior in amorphous metals during nanoindentation , 2005 .

[49]  J. Langer,et al.  Toward a Shear-Transformation-Zone Theory of Amorphous Plasticity , 2005 .

[50]  F. Lequeux,et al.  Length-Scale of Glassy Polymer Plastic Flow : A Neutron Scattering Study , 2008 .