Comparison of self-oscillating electronic ballasts dimming methods with power factor correction for fluorescent lamps

This paper presents a comparative analysis of dimmable self-oscillating electronic ballast for fluorescent lamps. A review of general dimming methods presented in the literature is performed. A general analysis of each dimming method is made, and the operation with power factor correction was considered in order to evaluate the characteristic of each topology and to define other circuits more adequate for this purpose. A comparison based on literature review and experimental results of the implemented prototypes is carried out in order to establish the main conclusion from this analysis.

[1]  Selim Öncü,et al.  Dimming self-oscillating ballast by variable inductor , 2007 .

[2]  José Marcos Alonso Alvarez,et al.  Automatic lamp detection technique for fluorescent lamps electronic ballasts , 2012, 2012 IEEE Industry Applications Society Annual Meeting.

[3]  Fengfeng Tao Advanced High-Frequency Electronic Ballasting Techniques for Gas Discharge Lamps , 2001 .

[4]  A.R. Seidel,et al.  Self-oscillating circuit behavior evaluation through nonlinear dynamic systems analysis , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[5]  Marco A. Dalla Costa,et al.  Feedforward Regulation Method for Self-Oscillating Electronic Ballast for Fluorescent Lamps , 2012, IEEE Transactions on Industrial Electronics.

[6]  José Marcos Alonso Alvarez,et al.  Automatic lamp detection technique for self-oscillating fluorescent lamp electronic ballasts , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[7]  Fred C. Lee,et al.  Self-oscillating electronic ballast with dimming control , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[8]  R.N. do Prado,et al.  Automatic luminous control for self-oscillating electronic ballast , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[9]  L. R. Nerone Novel self-oscillating class E ballast for compact fluorescent lamps , 2001 .

[10]  Huang-Jen Chiu,et al.  Single-stage dimmable electronic ballast with high power factor and low EMI , 2005 .

[11]  M. E. Schlittler,et al.  Analysis and Design of a Single-Stage High-Power-Factor Dimmable Electronic Ballast for Electrodeless Fluorescent Lamp , 2013, IEEE Transactions on Industrial Electronics.

[12]  Tsai-Fu Wu,et al.  Single-stage electronic ballast with dimming feature and unity power factor , 1998 .

[13]  Jong-Lick Lin,et al.  Novel Single-Stage Self-Oscillating Dimmable Electronic Ballast With High Power Factor Correction , 2011, IEEE Transactions on Industrial Electronics.

[14]  Javier Uceda,et al.  The discontinuous conduction mode Sepic and Cuk power factor preregulators: analysis and design , 1997, IEEE Trans. Ind. Electron..

[15]  C.-L. Chen,et al.  Analysis of self-excited electronic ballasts using BJTs/MOSFETs as switching devices , 1998 .

[16]  Humberto Pinheiro,et al.  Self-oscillating dimmable electronic ballast , 2003, IEEE Trans. Ind. Electron..

[17]  J. M. Alonso,et al.  Magnetically-controlled dimming technique with isolated output , 2009 .

[18]  G. W. Bruning,et al.  Analysis of the self-oscillating series resonant inverter for electronic ballasts , 1999 .

[19]  F. Raiser Dim the lights. Problems with lamp current control using a PWM signal , 2002 .

[20]  Marco A. Dalla Costa,et al.  Investigation of a New Control Strategy for Electronic Ballasts Based on Variable Inductor , 2008, IEEE Transactions on Industrial Electronics.

[21]  E. S. Saraiva,et al.  Magnetic regulator topologies for dimmable electronic ballasts , 2010, 2010 IEEE International Symposium on Industrial Electronics.

[22]  Chin Chang,et al.  Self-oscillating electronic ballast analysis using the relay systems approach , 2001 .

[23]  Mustapa Amira A design methodology for a self-oscillating electronic ballast , 2012 .

[24]  S.Y.R. Hui,et al.  Practical Evaluation of Dimming Control Methods for Electronic Ballasts , 2006, IEEE Transactions on Power Electronics.

[25]  R.N. do Prado,et al.  A design method for electronic ballast for fluorescent lamps , 2000, 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies.

[26]  R.N. do Prado,et al.  A Design Methodology for a Self-Oscillating Electronic Ballast , 2007, IEEE Transactions on Industry Applications.

[27]  Henry Shu-Hung Chung,et al.  A comparative study on dimming control methods for electronic ballasts , 2001 .

[28]  Xiaojun Xu,et al.  A novel closed loop interleaving strategy of multiphase critical mode boost PFC converters , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[29]  R.N. do Prado,et al.  Designing a self-oscillating electronic ballast with bipolar transistor , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[30]  L. R. Nerone,et al.  A mathematical model of the Class D converter for compact fluorescent ballasts , 1995 .

[31]  G. W. Bruning,et al.  Self-oscillating electronic ballast analysis via relay systems approach , 1999, APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No.99CH36285).

[32]  José Marcos Alonso Alvarez,et al.  Optimizing Universal Ballasts Using Magnetic Regulators and Digital Control , 2011, IEEE Transactions on Industrial Electronics.

[33]  F. C. Lee,et al.  A self-oscillating drive for single-stage charge-pump power-factor-correction electronic ballast with frequency modulation , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[34]  S.Y. Hui,et al.  Design and analysis of an IC-less self-oscillating series resonant inverter for dimmable electronic ballasts , 2005, IEEE Transactions on Power Electronics.

[35]  J.A. Sierra,et al.  Comparison of fluorescent lamp stabilization methods in the current-fed push-pull inverter , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[36]  H.S.H. Chung,et al.  Self-oscillating dimmable electronic ballast for fluorescent lamps , 2004, IEEE Power Electronics Letters.

[37]  R.N. do Prado,et al.  Self-oscillating electronic ballast design based on the point of view of control system , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).