Particle Size Distribution Measurements from Early to Late Injection Timing Low Temperature Combustion in a Heavy Duty Diesel Engine

[1]  Caroline L. Genzale,et al.  Effect of Ignition Delay on In-Cylinder Soot Characteristics of a Heavy Duty Diesel Engine Operating at Low Temperature Conditions , 2009 .

[2]  R. A. White,et al.  Effects of injection angles on combustion processes using multiple injection strategies in an HSDI diesel engine , 2008 .

[3]  Jose J. Lopez,et al.  Advanced methodology for improving testing efficiency in a single-cylinder research diesel engine , 2008 .

[4]  Rolf D. Reitz,et al.  Effects of Piston Bowl Geometry on Mixture Development and Late-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine , 2008 .

[5]  Krishna C. Natti,et al.  Particulate Matter Characterization Studies in an HSDI Diesel Engine under Conventional and LTC Regime , 2008 .

[6]  M. Musculus,et al.  In-Cylinder and Exhaust Soot in Low-Temperature Combustion Using a Wide-Range of EGR in a Heavy-Duty Diesel Engine , 2007 .

[7]  David B Kittelson,et al.  Nuclei-mode particulate emissions and their response to fuel sulfur content and primary dilution during transient operations of old and modern diesel engines. , 2007, Environmental science & technology.

[8]  Christopher P. Kolodziej,et al.  Comprehensive Characterization of Particulate Emissions from Advanced Diesel Combustion , 2007 .

[9]  Rolf D. Reitz,et al.  Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine , 2007 .

[10]  Niklas Schmidt,et al.  Detailed Diesel Exhaust Particulate Characterization and Real-Time DPF Filtration Efficiency Measurements During PM Filling Process , 2007 .

[11]  M. Musculus,et al.  Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in , 2006 .

[12]  Octavio Armas,et al.  Influence of measurement errors and estimated parameters on combustion diagnosis , 2006 .

[13]  Rolf D. Reitz,et al.  2-Color Thermometry Experiments and High-Speed Imaging of Multi-Mode Diesel Engine Combustion , 2005 .

[14]  R. A. White,et al.  Low Temperature Combustion within a Small Bore High Speed Direct Injection (HSDI) Diesel Engine , 2005 .

[15]  Y. Goto,et al.  Thermal Conditioning of Exhaust Gas: Potential for Stabilizing Diesel Nano-Particles , 2005 .

[16]  Kazutoshi Mori,et al.  Premixed Compression Ignition (PCI) Combustion for Simultaneous Reduction of NOx and Soot in Diesel Engine , 2004 .

[17]  M. Musculus.  On the Correlation between NOx Emissions and the Diesel Premixed Burn , 2004 .

[18]  J. Merkisz,et al.  Analysis of the Influence of Fuel Sulphur Content on Diesel Engine Particulate Emissions , 2002 .

[19]  Shuji Kimura,et al.  Ultra - Clean Combustion Technology Combining a Low - Temperature and Premixed Combustion Concept fo , 2001 .

[20]  K. Akihama,et al.  Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature , 2001 .

[21]  O. Armas,et al.  Diagnosis of DI Diesel combustion from in-cylinder pressure signal by estimation of mean thermodynamic properties of the gas , 1999 .

[22]  D. Kittelson.  Engines and nanoparticles: a review , 1998 .

[23]  John H. Johnson,et al.  The Effect of Fuel and Engine Design on Diesel Exhaust Particle Size Distributions , 1996 .

[24]  R. J. B. Way,et al.  Methods for Determination of Composition and Thermodynamic Properties of Combustion Products for Internal Combustion Engine Calculations , 1976 .