The binding and fluorescence quenching efficiency of nitroaromatic (explosive) vapors in fluorescent carbazole dendrimer thin films.

We present a study on three generations of fluorescent carbazole dendrimers that exhibit strong binding with nitroaromatic compounds accompanied by photoluminescence (PL) quenching, making them attractive sensing materials for the detection of explosives such as 2,4,6-trinitrotoluene (TNT). The absorption and release of vapors of the (deuterated) TNT analogue 4-nitrotoluene (pNT) from thin films of the dendrimers were studied with a combination of time-correlated neutron reflectometry and PL spectroscopy. When saturated with pNT the PL of the films was fully quenched and could not be recovered with flowing nitrogen at room temperature but only upon heating to 40-80 °C. Although the majority of the absorbed pNT could be removed with this method the recovered films were found to still contain a residual pNT concentration of ~0.1 molecules per cubic nanometer. However, the proportion of the PL recovered increased with generation with the third generation dendrimer exhibiting close to full recovery despite the presence of residual pNT. This result is attributed to a combination of two effects. First, the dendrimer films present a range of binding sites for nitroaromatic molecules with the stronger binding sites surviving the thermal recovery process. Second, there is a large decrease of the exciton diffusion coefficient with dendrimer generation, preventing migration of the excitation to the remaining bound pNT.

[1]  P. Shaw,et al.  High-Generation Dendrimers with Excimer-like Photoluminescence for the Detection of Explosives , 2013 .

[2]  P. Shaw,et al.  Fluorescent carbazole dendrimers for the detection of explosives , 2011 .

[3]  Paul E. Shaw,et al.  Solid State Dendrimer Sensors: Effect of Dendrimer Dimensionality on Detection and Sequestration of 2,4-Dinitrotoluene , 2011 .

[4]  Erdan Gu,et al.  Ultra-portable explosives sensor based on a CMOS fluorescence lifetime analysis micro-system , 2011 .

[5]  F. Klose,et al.  The multipurpose time-of-flight neutron reflectometer “Platypus” at Australia's OPAL reactor , 2011 .

[6]  Martin Baumgarten,et al.  Detection of TNT explosives with a new fluorescent conjugated polycarbazole polymer. , 2011, Chemical communications.

[7]  Andrew Nelson,et al.  Motofit – integrating neutron reflectometry acquisition, reduction and analysis into one, easy to use, package , 2010 .

[8]  Chengyi Zhang,et al.  Organic nanofibrils based on linear carbazole trimer for explosive sensing. , 2010, Chemical communications.

[9]  Françoise Serein-Spirau,et al.  Ultra trace detection of explosives in air: development of a portable fluorescent detector. , 2010, Talanta.

[10]  G. Tobin,et al.  Detection of explosive vapors with a charge transfer molecule: self-assembly assisted morphology tuning and enhancement in sensing efficiency. , 2010, Chemical communications.

[11]  Meaghan E Germain,et al.  Optical explosives detection: from color changes to fluorescence turn-on. , 2009, Chemical Society reviews.

[12]  Michael James,et al.  Solid-state dendrimer sensors: probing the diffusion of an explosive analogue using neutron reflectometry. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[13]  Ifor D. W. Samuel,et al.  Thickness Dependence of the Fluorescence Lifetime in Films of Bisfluorene-Cored Dendrimers , 2008 .

[14]  I. Samuel,et al.  Exciton Diffusion Measurements in Poly(3‐hexylthiophene) , 2008 .

[15]  Victoria L McGuffin,et al.  Luminescence-based methods for sensing and detection of explosives , 2008, Analytical and bioanalytical chemistry.

[16]  E. Nesterov,et al.  Chemosensory performance of molecularly imprinted fluorescent conjugated polymer materials. , 2007, Journal of the American Chemical Society.

[17]  Jincai Zhao,et al.  Detection of explosives with a fluorescent nanofibril film. , 2007, Journal of the American Chemical Society.

[18]  Jurjen Wildeman,et al.  Simultaneous enhancement of charge transport and exciton diffusion in poly(p-phenylene vinylene) derivatives , 2005 .

[19]  Mark E. Fisher,et al.  Implementation of serial amplifying fluorescent polymer arrays for enhanced chemical vapor sensing of landmines , 2003, SPIE Defense + Commercial Sensing.

[20]  Self-amplifying semiconducting polymers for chemical sensors , 2002 .

[21]  Kirk S. Schanze,et al.  Fluorescent Polyacetylene Thin Film Sensor for Nitroaromatics , 2001 .

[22]  Colin J. Cumming,et al.  Using novel fluorescent polymers as sensory materials for above-ground sensing of chemical signature compounds emanating from buried landmines , 2001, IEEE Trans. Geosci. Remote. Sens..

[23]  Marcus J. la Grone,et al.  Detection of land mines by amplified fluorescence quenching of polymer films: a man-portable chemical sniffer for detection of ultratrace concentrations of explosives emanating from land mines , 2000, Defense, Security, and Sensing.

[24]  Charles E. Swenberg,et al.  Electronic Processes in Organic Crystals and Polymers , 1999 .

[25]  J. Hofkens,et al.  Photophysical study of a multi-chromophoric dendrimer by time-resolved fluorescence and femtosecond transient absorption spectroscopy , 1999 .

[26]  T. Swager,et al.  Porous Shape Persistent Fluorescent Polymer Films: An Approach to TNT Sensory Materials , 1998 .