Modelling of concrete at early ages: Application to an externally restrained slab

In view of the growing use of High Performance Concrete, with large hydration-induced volumetric changes (both thermal and shrinkage related), numerical modelling of concrete at early ages has become an important issue, regarding the possible formation of cracks, with undesirable consequences on aesthetics and structural durability. In this paper a thermo-mechanical model based on the framework of finite element techniques is presented, and involves the consideration of phenomena such as the heat production induced by the cement hydration, the evolving properties of concrete during hydration and early-age creep. A numerical application is presented, focused on the thermo-mechanical behaviour of a slab strongly restrained by the supporting piles, which has been monitored during the construction phase. For this particular problem it is shown that by making a reasonable thermal and mechanical characterization of concrete, the thermo-mechanical model provides results that are well correlated with the observed in situ measurements, namely the temperatures and the strains.

[1]  de R René Borst,et al.  Finite-Element Modeling of Deformation and Cracking in Early-Age Concrete , 1994 .

[2]  Rui Faria,et al.  Numerical modelling of concrete curing, regarding hydration and temperature phenomena , 2002 .

[3]  A. D'aloia.  Early age kinetics: Activation energy, maturity and equivalent age , 2003 .

[4]  G Chengju,et al.  コンクリートのマチュリティ 初期段階の強度を予測する方法 | 文献情報 | J-GLOBAL 科学技術総合リンクセンター , 1989 .

[5]  M. Sule,et al.  Effect of Reinforcement on Early-Age Cracking in High Strength Concrete , 2003 .

[6]  B. Glisic,et al.  Monitoring of concrete at Very Early Age Using Stiff SOFO Sensor , 2000 .

[7]  D. Bentz.  Three-Dimensional Computer Simulation of Portland Cement Hydration and Microstructure Development , 1997 .

[8]  N. Robinson.  Solar radiation , 2020, Advanced Remote Sensing.

[9]  J. Jonasson,et al.  Modelling of temperature, moisture and stresses in young concrete , 1994 .

[10]  Olivier Coussy,et al.  Modeling of Thermochemomechanical Couplings of Concrete at Early Ages , 1995 .

[11]  R. Springenschmid,et al.  Prevention of thermal cracking in concrete at early ages : state-of-the-art report presented by RILEM Technical Committee 119, Avoidance of Thermal Cracking in Concrete at Early Ages , 1998 .

[12]  Y. Jaluria,et al.  An Introduction to Heat Transfer , 1950 .

[13]  Fernando A. Branco,et al.  Heat of Hydration Effects in Concrete Structures , 1992 .

[14]  A. Bentur,et al.  Terminology and definitions , 2003 .

[15]  Mårten Larson,et al.  Thermal crack estimation in early age concrete : models and methods for practical application , 2003 .

[16]  G. De Schutter,et al.  Finite element simulation of thermal cracking in massive hardening concrete elements using degree of hydration based material laws , 2002 .

[17]  K. Van Breugel,et al.  Simulation of hydration and formation of structure in hardening cement-based materials , 1991 .

[18]  E. Osman,et al.  Double power law for basic creep of concrete , 1976 .

[19]  J. Weiss.  Experimental determination of the 'Time Zero', t0 ('Maturity-Zero', M0) , 2003 .

[20]  Guo Chengju,et al.  Maturity of Concrete: Method for Predicting Early-Stage Strength , 1989 .

[21]  Pietro Lura,et al.  Mixture Proportioning for Internal Curing , 2005 .

[22]  Robert Otto Rasmussen,et al.  CONCRETE TEMPERATURE MODELING AND STRENGTH PREDICTION USING MATURITY CONCEPTS IN THE FHWA HIPERPAV SOFTWARE , 2001 .

[23]  Robert R. Zarr,et al.  A History of Testing Heat Insulators at the National Institute of Standards and Technology , 2001 .

[24]  Mats Emborg,et al.  Assessment of risk of thermal cracking in hardening concrete , 1994 .