Improved Substrate Protection and Self-Healing of Boundary Lubrication Film Consisting of Polydimethylsiloxane with Cationic Side Groups

The substrate protection and self-healing capability of a cationic polymer lubricant (CPL) on a silicon oxide surface were tested with a pin-on-disc tribometer and atomic force microscopy (AFM). CPL was made of low molecular weight polydimethylsiloxane (PDMS) containing covalently attached quaternary ammonium cations and iodide counter-anions. CPL was spin-coated on the silicon oxide surface to form a 3–4 nm thick bound-and-mobile lubricant layer. The CPL film capable of binding to the SiO2 surface through ionic interactions is superior in substrate protection than the neutral PDMS film which cannot form the bound layer. The mobile component in the CPL film readily flows into the lubricant-depleted sliding contact region from the surrounding film. The self-healing capability of CPL via lateral flow is slightly enhanced in humid environments due to water uptake in the film. The 3–4 nm thick CPL film on silicon oxide takes 30–40 s to flow into a ~50 μm wide track, which corresponds to an apparent spreading rate of 2–3 × 10−11 m2/s.

[1]  John Crank,et al.  The Mathematics Of Diffusion , 1956 .

[2]  C. Mathew Mate,et al.  Atomic force microscopy of polymeric liquid films , 1989 .

[3]  Shen,et al.  Vibrational spectroscopy of water at the vapor/water interface. , 1993, Physical review letters.

[4]  Matthew R. Linford,et al.  Alkyl Monolayers on Silicon Prepared from 1-Alkenes and Hydrogen-Terminated Silicon , 1995 .

[5]  Xudong Xiao,et al.  Scanning polarization force microscopy: A technique for imaging liquids and weakly adsorbed layers , 1995 .

[6]  Michael J. McNallan,et al.  Formation of Cylindrical Sliding-Wear Debris on Silicon in Humid Conditions and Elevated Temperatures , 1995 .

[7]  K. Komvopoulos.  Surface engineering and microtribology for microelectromechanical systems , 1996 .

[8]  Valery N. Bliznyuk,et al.  Adhesive and Friction Forces between Chemically Modified Silicon and Silicon Nitride Surfaces , 1998 .

[9]  J. Sader,et al.  Calibration of rectangular atomic force microscope cantilevers , 1999 .

[10]  Myung S. Jhon,et al.  Spreading of perfluoropolyalkylether films on amorphous carbon surfaces , 1999 .

[11]  Traugott E. Fischer,et al.  Genesis and role of wear debris in sliding wear of ceramics , 2000 .

[12]  R. Maboudian,et al.  Self-assembled monolayers as anti-stiction coatings for MEMS: characteristics and recent developments , 2000 .

[13]  S. Wunder,et al.  Packing and Thermal Stability of Polyoctadecylsiloxane Compared with Octadecylsilane Monolayers , 2000 .

[14]  R. Maboudian,et al.  Dichlorodimethylsilane as an anti-stiction monolayer for MEMS: a comparison to the octadecyltrichlorosilane self-assembled monolayer , 2001 .

[15]  Steven T. Patton,et al.  Lubrication of Microelectromechanical Systems (MEMS) Using Bound and Mobile Phases of Fomblin Zdol® , 2002 .

[16]  Peng Wang,et al.  Tribological Performance of Room-Temperature Ionic Liquids as Lubricant , 2002 .

[17]  G. W. Tyndall,et al.  Autophobic Dewetting of Perfluoropolyether Films on Amorphous-Nitrogenated Carbon Surfaces , 2002 .

[18]  Junho Choi,et al.  Nanoscale Lubricant with Strongly Bonded Phase and Mobile Phase , 2003 .

[19]  M. Rodnikova,et al.  Some peculiarities of liquid water structure , 2003 .

[20]  Yongseok Jun,et al.  Alkoxyl monolayers as anti-stiction coatings in Si-based MEMS devices , 2003 .

[21]  G. Ewing.  Thin Film Water , 2004 .

[22]  K. C. Eapen,et al.  MEMS lubricants based on bound and mobile phases of hydrocarbon compounds: film deposition and performance evaluation , 2005, Journal of Microelectromechanical Systems.

[23]  Michelle Foster,et al.  Water on MgO(1 0 0)—An infrared study at ambient temperatures , 2005 .

[24]  J. Nainaparampil,et al.  Aging of a fluorinated lubricant on bare and DLC-coated silicon-based MEMS , 2005 .

[25]  Robert W. Carpick,et al.  Accounting for the JKR–DMT transition in adhesion and friction measurements with atomic force microscopy , 2005 .

[26]  K. Strawhecker,et al.  Reduction of adhesion and friction of silicon oxide surface in the presence of n-propanol vapor in the gas phase , 2005 .

[27]  Quasi-equilibrium AFM measurement of disjoining pressure in lubricant nano-films I: Fomblin Z03 on silica. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[28]  Steven T. Patton,et al.  Performance results of MEMS coated with a conformal DLC , 2006 .

[29]  K. C. Eapen,et al.  Lubrication of MEMS under vacuum , 2006 .

[30]  M. Dugger,et al.  Nanotribology and MEMS , 2007 .

[31]  S. Sasaki,et al.  Ionic liquid lubrication of electrodeposited nickel–Si3N4 composite coatings , 2007 .

[32]  M. Dugger,et al.  In-situ Vapor-Phase Lubrication of MEMS , 2008 .

[33]  Water penetration of damaged self-assembled monolayers. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[34]  M. Dugger,et al.  Macro- to nanoscale wear prevention via molecular adsorption. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[35]  E. Yoon,et al.  Tribological properties of trichlorosilane-based one- and two-component self-assembled monolayers , 2008 .

[36]  Qinlin Gu,et al.  Tribological behaviors of self-assembled 3-aminopropyltriethoxysilane films on silicon , 2008 .

[37]  David B Asay,et al.  Corrected direct force balance method for atomic force microscopy lateral force calibration. , 2009, The Review of scientific instruments.

[38]  Effects of ionic side groups attached to polydimethylsiloxanes on lubrication of silicon oxide surfaces. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[39]  A. Barnette,et al.  Effects of Surface Chemistry on Structure and Thermodynamics of Water Layers at Solid−Vapor Interfaces† , 2009 .

[40]  A. Barnette,et al.  Experimental and density functional theory study of the tribochemical wear behavior of SiO2 in humid and alcohol vapor environments. , 2009, Langmuir : the ACS journal of surfaces and colloids.