Structure property relations in short-fiber reinforced plastics

Abstract As the number of uses for variously reinforced plastics has grown, the design engineer's need for dependable approaches to property prediction for these systems has grown tremendously. It is quite clear now from experiment that one has to know not only the volume fraction of reinforcement, but also how to account for the effects of reinforcement shape and distribution in space. Most importantly, having accounted for the significant variables, any workable prediction method must be straightforward enough to use in designing without consuming huge amounts of expensive computing time.

[1]  K. L. Jerina,et al.  Strength of Molded Discontinuous Fiber Composites. , 1972 .

[2]  R. M. Christensen,et al.  Effective Stiffness of Randomly Oriented Fibre Composites , 1972 .

[3]  J. Kardos,et al.  Moduli of Crystalline Polymers Employing Composite Theory , 1972 .

[4]  J. Kardos,et al.  The Fabrication, Morphology, and Dynamic Mechanical Properties of a Model Composite System Containing in-situ Grown Filler, , 1972 .

[5]  R. Foye.  The Transverse Poisson's Ratio of Composites , 1972 .

[6]  L. Broutman,et al.  Mechanical properties of particulate composites , 1972 .

[7]  L. Goettler,et al.  Stiffness of Non-Aligned Fiber Reinforced Composites , 1971 .

[8]  M. Narkis,et al.  Stress-strain behavior of styrene-acrylonitrile/glass bead composites in the glassy region , 1971 .

[9]  R. Barker,et al.  Stress Concentrations Near a Discontinuity in Fibrous Composites , 1971 .

[10]  M. Narkis,et al.  Stress–strain behavior of SAN/glass bead composites above the glass transition temperature , 1971 .

[11]  B. Walter Rosen,et al.  On Some Symmetry Conditions for Three Dimensional Fibrous Composites , 1971 .

[12]  J. Whitney,et al.  The Laminate Analogy for 2 and 3 Dimensional Composite Materials , 1971 .

[13]  E. M. Wu,et al.  A General Theory of Strength for Anisotropic Materials , 1971 .

[14]  A. Fahmy,et al.  Thermal Expansion of Graphite‐Epoxy Composites , 1970 .

[15]  L. Nielsen.  Generalized Equation for the Elastic Moduli of Composite Materials , 1970 .

[16]  A. Dibenedetto,et al.  The Brittle Fracture of Amorphous Thermoplastic Polymers , 1970 .

[17]  Ori Ishai,et al.  LIMITS OF LINEAR VISCOELASTICITY AND YIELD OF A FILLED AND UNFILLED EPOXY RESIN , 1970 .

[18]  G. E. Padhwer,et al.  On the strength and stiffness of planar reinforced plastic resins , 1970 .

[19]  M. Abrahams,et al.  Prediction of composite properties from fibre and matrix properties , 1969 .

[20]  N. Pagano,et al.  CONSEQUENCES OF ENVIRONMENTALLY INDUCED DILATATION IN SOLIDS , 1969 .

[21]  L. Nielsen,et al.  Mechanical properties of tape composites , 1969 .

[22]  N. Pagano,et al.  The Laminate Approximation for Randomly Oriented Fibrous Composites , 1969 .

[23]  J. Halpin.  Stiffness and Expansion Estimates for Oriented Short Fiber Composites , 1969 .

[24]  C. C. Chamis,et al.  Failure Criteria for Filamentary Composites , 1969 .

[25]  L. Lee.  Strength ‐Composition relationships of random short glass fiber ‐thermoplastics composites , 1969 .

[26]  M. E. Waddoups,et al.  A Method of Predicting the Nonlinear Behavior of Laminated Composites , 1969 .

[27]  V. R. Riley,et al.  Fibre/Fibre Interaction , 1968 .

[28]  J. Halpin,et al.  Ribbon Reinforcement of Composites , 1968 .

[29]  W. Bascom,et al.  Microvoids in Glass-Resin Composites. Their Origin and Effect on Composite Strength , 1968 .

[30]  A. S. Kenyon.  Role of the interface in glass-epoxy composites , 1968 .

[31]  R. Farris,et al.  The Influence of Vacuole Formation on the Response and Failure of Filled Elastomers , 1968 .

[32]  R. Farris.  The Character of the Stress‐Strain Function for Highly Filled Elastomers , 1968 .

[33]  Richard Schapery.  Thermal Expansion Coefficients of Composite Materials Based on Energy Principles , 1968 .

[34]  J. Lees.  A study of the tensile strength of short fiber reinforced plastics , 1968 .

[35]  J. Lees.  A study of the tensile modulus of short fiber reinforced plastics , 1968 .

[36]  L. Nielsen,et al.  YOUNG'S MODULUS OF COMPOSITES FILLED WITH RANDOMLY ORIENTED FIBERS , 1968 .

[37]  T. Nicholas,et al.  The effect of filler on the mechanical properties of an elastomer at high strain rates , 1968 .

[38]  Leonard R. Herrmann,et al.  Response of Reinforcing Wires to Compressive States of Stress , 1967 .

[39]  W. Mulvaney,et al.  STRENGTH PROPERTIES OF EPOXY COMPOSITES AND CASTINGS , 1967 .

[40]  D. G. Flom,et al.  HIGH STRENGTH, HIGH MODULUS, WHISKER REINFORCED PLASTIC COMPOSITES. , 1967 .

[41]  Lawrence E. Nielsen,et al.  Mechanical Properties of Particulate-Filled Systems , 1967 .

[42]  S. Sterman,et al.  The effect of silane coupling agents in improving the properties of filled or reinforced thermoplastics , 1966 .

[43]  A. Kelly,et al.  Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum , 1965 .

[44]  Rodney Hill,et al.  Theory of mechanical properties of fibre-strengthened materials—III. self-consistent model , 1965 .

[45]  H. Alter.  Filler particle size and mechanical properties of polymers , 1965 .

[46]  H. Kuhlmann,et al.  The effect of filler particle‐size distribution in epoxy casting formulations , 1965 .

[47]  Z. Hashin,et al.  The Elastic Moduli of Fiber-Reinforced Materials , 1964 .

[48]  W. F. Furter.  Filled linear polyethylene compositions , 1964 .

[49]  J. J. Jaruzelski,et al.  The Bonding of Fillers to Thermosetting Resins , 1962 .

[50]  F. Schwarzl.  MECHANICAL PROPERTIES OF HIGHLY FILLED ELASTOMERS , 1962 .

[51]  F. Bueche,et al.  Molecular basis for the mullins effect , 1960 .

[52]  T. L. Smith.  Volume Changes and Dewetting in Glass Bead-Polyvinyl Chloride Elastomeric Composites under Large Deformations , 1959 .

[53]  H. Parry,et al.  Effect of Fillers on Epoxy Resins , 1957 .

[54]  D. Bisset,et al.  Behavior of Highly-Filled Rubber Vulcanizates , 1957 .

[55]  E. H. Kerner.  The Elastic and Thermo-elastic Properties of Composite Media , 1956 .

[56]  T. Protzman,et al.  The thermal expansion of stretched methyl methacrylate polymer , 1956 .

[57]  P. Lauterbur,et al.  Filler Phenomena in Silicone Rubber , 1955 .

[58]  H. L. Cox.  The elasticity and strength of paper and other fibrous materials , 1952 .

[59]  R. Carey,et al.  Filled Polyethylene Compounds , 1950 .

[60]  L. Cohan,et al.  Inorganic Pigments in Natural and Synthetic Rubber , 1948 .

[61]  P. S. Turner.  Thermal-expansion stresses in reinforced plastics , 1946 .

[62]  R. E. Lavengood.  Strength of short‐fiber reinforced composites , 1972 .

[63]  P. E. Chen,et al.  Strength properties of discontinuous fiber composites , 1971 .

[64]  R. E. Lavengood,et al.  Stress Fields Around Multiple Inclusions , 1969 .

[65]  P. Jackson,et al.  The effect of fibre orientation on the tensile strength of fibre-reinforced metals , 1966 .

[66]  L. Nielsen.  Simple theory of stress-strain properties of filled polymers† , 1966 .

[67]  N. F. Dow,et al.  Structural efficiency of orthotropic cylindrical shells subjected to axial compression. , 1965 .

[68]  F. Schwarzl,et al.  Mechanical properties of highly filled elastomers. I - Relationship between filler characteristics, shear moduli, and tensile properties , 1965 .

[69]  I. Petker.  The influence of resin strength and defects on the interlaminar shear strength of filament‐wound composites , 1965 .

[70]  R. Farris.  Dilatation of granular filled elastomers under high rates of strain , 1964 .