A deterministic approach for predicting the transformation of starch suspensions in tubular heat exchangers

Numerical modeling of fluid flow, heat transfer and transformation is conducted for an aqueous suspension of starch granules running throughout a four-heating-section tubular exchanger. The numerical model considers the transformation kinetics and the rheological behavior of the starch suspension as determined from laboratory work; further, the model includes the geometrical characteristics of the heat exchanger, as well as the operating conditions which were considered in running it. Model predictions are compared with results from experimental work, after sampling the starch suspension under thermal processing and later characterizing it using laboratory techniques. The numerical model predicts the bulk swelling state of the starch suspension at a level of agreement (−41% in volume mean diameter increase) which is better than the one reached after assuming plug-flow and radially-independent temperature (−66%). The inclusion of two-way coupling between the relevant phenomena constitutes therefore a positive improvement.

[1]  J. Sieffermann,et al.  Interactions between modified starch and carrageenan during pasting , 2014 .

[2]  Christopher G. Cvetkovski,et al.  Heat transfer in a U-Bend pipe: Dean number versus Reynolds number , 2015 .

[3]  A. Datta.  Status of Physics‐Based Models in the Design of Food Products, Processes, and Equipment , 2008 .

[4]  J. Doublier,et al.  Effect of thermomechanical treatment on the rheological properties of crosslinked waxy corn starch , 2003 .

[5]  G. D. L. Cruz,et al.  Photoacoustic measurements of thermal diffusivity of amylose, amylopectin and starch , 2003 .

[6]  Nelson O. Moraga,et al.  Computational Simulation and Developments Applied to Food Thermal Processing , 2011 .

[7]  A. Tecante,et al.  Rheology and microstructure of κ-carrageenan under different conformations induced by several concentrations of potassium ion , 2011 .

[8]  D. Flick,et al.  Swelling kinetics of waxy maize and maize starches at high temperatures and heating rates , 2008 .

[9]  J. Petit,et al.  A CFD model as a tool to simulate β-lactoglobulin heat-induced denaturation and aggregation in a plate heat exchanger , 2014 .

[10]  J. Doublier,et al.  A rheological characterization of semi-solid dairy systems , 2008 .

[11]  Jorge Andrey Wilhelms Gut,et al.  Experimental and numerical heat transfer in a plate heat exchanger , 2006 .

[12]  D. Flick,et al.  Coupling fluid flow, heat transfer and thermal denaturation-aggregation of beta-lactoglobulin using an Eulerian/Lagrangian approach , 2012 .

[13]  Vassili Toropov,et al.  Optimisation of the energy efficiency of bread-baking ovens using a combined experimental and computational approach , 2013 .

[14]  Brijesh Tiwari,et al.  Computational Fluid Dynamics in the Design and Analysis of Thermal Processes: A Review of Recent Advances , 2013, Critical reviews in food science and nutrition.

[15]  Thijs Defraeye,et al.  Advanced computational modelling for drying processes – A review , 2014 .

[16]  M. A. Rao,et al.  Role of Thermo-Rheological Behaviour in Simulation of Continuous Sterilization of a Starch Dispersion , 2000 .

[17]  Da-Wen Sun,et al.  Computational fluid dynamics (CFD) ¿ an effective and efficient design and analysis tool for the food industry: A review , 2006 .

[18]  J. Bronlund,et al.  Dynamic rheological and microstructural properties of normal and waxy rice starch gels containing milk protein ingredients. , 2009 .

[19]  J. Sieffermann,et al.  Starch/carrageenan/milk proteins interactions studied using multiple staining and Confocal Laser Scanning Microscopy. , 2014, Carbohydrate polymers.

[20]  N. Jacquet,et al.  The swelling behaviour of wheat starch granules during isothermal and non-isothermal treatments , 2013 .

[21]  M. Schirmer,et al.  Physicochemical and morphological characterization of different starches with variable amylose/amylopectin ratio , 2013 .

[22]  Keller Sullivan Oliveira Rocha,et al.  Three-Dimensional Modeling and Simulation of Heat and Mass Transfer Processes in Porous Media: An Application for Maize Stored in a Flat Bin , 2013 .

[23]  M. R. Hajmohammadi,et al.  A new configuration of bend tubes for compound optimization of heat and fluid flow , 2013 .

[24]  U. Kulozik,et al.  Reaction kinetic pathway of reversible and irreversible thermal denaturation of β-lactoglobulin , 2007 .

[25]  Tomoko Sasaki,et al.  Effect of Wheat Starch Structure on Swelling Power , 1998 .

[26]  J. Sieffermann,et al.  Starch/carrageenan mixed systems: Penetration in, adsorption on or exclusion of carrageenan chains by granules? , 2014 .

[27]  D. S. Jackson,et al.  Starch gelatinization. , 2009, Advances in food and nutrition research.

[28]  K. Poutanen,et al.  HEAT‐INDUCED STRUCTURAL CHANGES OF SMALL AND LARGE BARLEY STARCH GRANULES , 1998 .

[29]  D. Flick,et al.  An Eulerian-Lagrangian approach for coupling fluid flow, heat transfer and liquid food product transformation , 2013, Comput. Chem. Eng..

[30]  D. Flick,et al.  Influence of whey protein aggregation on the residence time distribution in a tubular heat exchanger and a helical holding tube during heat treatment process , 2012 .

[31]  Patrick Amestoy,et al.  A Fully Asynchronous Multifrontal Solver Using Distributed Dynamic Scheduling , 2001, SIAM J. Matrix Anal. Appl..

[32]  M. Britten,et al.  β-Lactoglobulin and WPI aggregates: Formation, structure and applications , 2011 .

[33]  Lin Li,et al.  Thermal processing of starch-based polymers , 2009 .

[34]  William B. Zimmerman,et al.  Multiphysics Modeling with Finite Element Methods , 2006 .

[35]  O. Thas,et al.  Interactions between κ-carrageenan, milk proteins and modified starch in sterilized dairy desserts , 2006 .

[36]  C. Michon,et al.  Influence of thermo-mechanical treatment and skim milk components on the swelling behavior and rheological properties of starch suspensions , 2015 .

[37]  Patrick Amestoy,et al.  Hybrid scheduling for the parallel solution of linear systems , 2006, Parallel Comput..