Effect of pretreatment with high temperature and low humidity on drying time and prevention of checking during radio-frequency/vacuum drying of Japanese cedar pillar
暂无分享，去创建一个
[1] Chengyuan Li,et al. Effect of Compressive Load on Shrinkage of Larch Blocks During Radio-Frequency Vacuum Heating , 2007 .
[2] N. Fujimoto,et al. Effect of the Treatment Temperature on the Surface Drying Set of Sugi Boxed-Heart Square Timber , 2007 .
[3] T. Takeda,et al. Effect of Subsequent Kiln-Schedule after the High-Temperature Setting Treatment on Internal Stresses of Sugi Boxed-Heart Timber without Back-Splittings , 2005 .
[4] Jiayan Luo,et al. Effect of steam explosion treatments on drying rates and moisture distributions during radio-frequency/vacuum drying of larch pillar combined with a longitudinal kerf , 2002, Journal of Wood Science.
[5] S. Barry,et al. The effects of different kerfing and center-boring treatments on the checking of ACQ treated pine posts exposed to the weather. , 2000 .
[6] N. Lee,et al. Effect of radio-frequency/vacuum drying and mechanical press-drying on shrinkage and checking of walnut log cross sections , 1998 .
[7] S. Avramidis. Radio-frequency/vacuum drying of softwood : drying of thick western red cedar with constant electrode voltage , 1994 .
[8] Taras,et al. Comparison of moisture content distribution, stress distribution and shrinkage of red oak lumber dried by a radio-frequency/vacuum drying process and a conventional kiln , 1984 .