Influence of boundary conditions on the behaviour of composite channel section subjected to pure bending – Experimental study

[1]  T. Kubiak,et al.  Global-distortional buckling mode influence on post-buckling behaviour of lip-channel beams , 2020 .

[2]  T. Kubiak,et al.  The Influence of the Layer Arrangement on the Distortional Post-Buckling Behavior of Open Section Beams , 2020, Materials.

[3]  Z. Kołakowski,et al.  The Influence of the Internal Forces of the Buckling Modes on the Load-Carrying Capacity of Composite Medium-Length Beams under Bending , 2020, Materials.

[4]  J. Jankowski,et al.  Interactive Buckling of Steel LC-Beams Under Bending , 2019, Materials.

[5]  M. Bambach.  Experimental and numerical study of the bending strength of natural fibre composite structural channel sections , 2019, Composite Structures.

[6]  D. Camotim,et al.  Distortional-global interaction in lipped channel and zed-section beams: Strength, relevance and DSM design , 2018, Thin-Walled Structures.

[7]  J. Jankowski,et al.  Interactive buckling of steel C-beams with different lengths – From short to long beams , 2018 .

[8]  J. Bieniaś,et al.  Collapse of channel section composite profile subjected to bending Part II: Failure analysis , 2017 .

[9]  Leszek Czechowski,et al.  Collapse of channel section composite profile subjected to bending. Part I: Numerical investigations , 2017 .

[10]  Dinar Camotim,et al.  Local-distortional interaction in cold-formed steel beams: Behaviour, strength and DSM design , 2017 .

[11]  Alexandre Landesmann,et al.  Distortional failure of cold-formed steel beams under uniform bending: Behaviour, strength and DSM design , 2017 .

[12]  Zbigniew Kolakowski,et al.  Influence of the distortional-lateral buckling mode on the interactive buckling of short channels , 2016 .

[13]  T. Kubiak,et al.  Experimental investigations of thin-walled GFRP beams subjected to pure bending , 2016 .

[14]  P. Paczos,et al.  The experimental and analytical investigations of torsion phenomenon of thin-walled cold formed channel beams subjected to four-point bending , 2016 .

[15]  Nuno Silvestre,et al.  Structural behavior of hybrid FRP pultruded beams: Experimental, numerical and analytical studies , 2016 .

[16]  Tomasz Kubiak,et al.  Imperfection sensitivity analysis of the nonlinear stability of composite beams – Numerical and experimental investigations , 2016 .

[17]  Andrzej Teter,et al.  Coupled Static and Dynamic Buckling Modelling of Thin-Walled Structures in Elastic Range Review of Selected Problems , 2016 .

[18]  T. Kubiak,et al.  Local buckling and post-buckling of composite channel-section beams – Numerical and experimental investigations , 2016 .

[19]  Tomasz Kubiak,et al.  Selected problems concerning determination of the buckling load of channel section beams and columns , 2015 .

[20]  J. Bieniaś,et al.  Influence of autoclaving process parameters on the buckling and postbuckling behaviour of thin-walled channel section beams , 2014 .

[21]  Kim J.R. Rasmussen,et al.  Distortional–global interaction buckling of stainless steel C-beams: Part I — Experimental investigation , 2014 .

[22]  Kim J.R. Rasmussen,et al.  Distortional–global interaction buckling of stainless steel C-beams: Part II — Numerical study and design , 2014 .

[23]  Piotr Paczos,et al.  Experimental investigation of C-beams with non-standard flanges , 2014 .

[24]  A. M. A. Heijden.  W. T. Koiter-s Elastic Stability of Solids and Structures , 2012 .

[25]  Fernando A. Branco,et al.  First-order, buckling and post-buckling behaviour of GFRP pultruded beams. Part 1: Experimental study , 2011 .

[26]  Krzysztof Magnucki,et al.  Buckling and optimal design of cold-formed thin-walled beams: Review of selected problems , 2011 .

[27]  Jaehong Lee,et al.  Lateral buckling analysis of thin-walled laminated composite beams with monosymmetric sections , 2006 .

[28]  Pizhong Qiao,et al.  Flexural-torsional buckling of fiber-reinforced plastic composite open channel beams , 2005 .

[29]  Zbigniew Kolakowski,et al.  Interactive buckling and load carrying capacity of thin-walled beam-columns with intermediate stiffeners , 2004 .

[30]  Kappyo Hong,et al.  Lateral buckling of I-section composite beams , 2002 .

[31]  László P. Kollár,et al.  Lateral-torsional buckling of composite beams , 2002 .

[32]  Edoardo Cosenza,et al.  Local buckling curves for the design of FRP profiles , 2000 .

[33]  Zbigniew Kolakowski,et al.  Interactive buckling of thin-walled beam-columns with intermediate stiffeners or/and variable thickness , 2000 .

[34]  A. Vlot,et al.  Development of fibre metal laminates for advanced aerospace structures , 2000 .

[35]  Julio F. Davalos,et al.  Flexural-torsional buckling of pultruded fiber reinforced plastic composite I-beams: experimental and analytical evaluations , 1997 .

[36]  Zbigniew Kolakowski,et al.  A semi-analytical method for the analysis of the interactive buckling of thin-walled elastic structures in the second order approximation , 1996 .

[37]  J. Yang,et al.  The mechanical behavior of GLARE laminates for aircraft structures , 2005 .

[38]  James F. Doyle,et al.  Nonlinear Analysis of Thin-Walled Structures , 2001 .

[39]  Ioannis G. Raftoyiannis,et al.  Lateral and distortional buckling of pultruded I-beams , 1994 .

[40]  Leif A. Carlsson,et al.  Experimental characterization of advanced composite materials , 1987 .

[41]  Charles Libove,et al.  Buckling Stresses for Flat Plates and Sections , 1952 .