Two-in-one: cathode modification and improved solar cell blend stability through addition of modified fullerenes

The synthesis of dual purpose modified fullerenes with pyridine-as well as amine-functional groups is reported. Addition of these fullerenes to a polymer : fullerene bulk-heterojunction blend based on a thiophene-quinoxaline donor polymer is found to modify the active layer/cathode interface of inverted solar cells (glass/ITO/active layer/MoO3/Al). In particular the open-circuit voltage of devices is increased from 0.1 V to about 0.7 V, which results in a drastic rise in photovoltaic performance with a power conversion efficiency of up to 3%. At the same time, presence of the functionalised fullerene additives prevents the detrimental formation of micrometre-sized fullerene crystals upon annealing at 140 degrees C. As a result, the device performance is retained, which promises significantly increased thermal stability of the bulk-heterojunction blend nanostructure.

[1]  J. J. Richards,et al.  Modification of PCBM Crystallization via Incorporation of C60 in Polymer/Fullerene Solar Cells , 2013 .

[2]  O. Inganäs,et al.  Improving Cathodes with a Polymer Interlayer in Reversed Organic Solar Cells , 2014 .

[3]  Hung-Wei Liu,et al.  Fullerene bisadduct as an effective phase-separation inhibitor in preparing poly(3-hexylthiophene)–[6,6]-phenyl-C61-butyric acid methyl ester blends with highly stable morphology , 2012 .

[4]  Olle Inganäs,et al.  Interlayer for Modified Cathode in Highly Efficient Inverted ITO‐Free Organic Solar Cells , 2012, Advanced materials.

[5]  Fei Huang,et al.  Origin of the enhanced open-circuit voltage in polymer solar cells via interfacial modification using conjugated polyelectrolytes , 2010 .

[6]  P. M. Kristiansen,et al.  Fullerene Nucleating Agents: A Route Towards Thermally Stable Photovoltaic Blends , 2014 .

[7]  Menglan Lv,et al.  [6,6]-phenyl-C₆₁-butyric acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl ester as an acceptor and cathode interfacial material in polymer solar cells. , 2014, ACS applied materials & interfaces.

[8]  O. Inganäs,et al.  An Easily Synthesized Blue Polymer for High‐Performance Polymer Solar Cells , 2010, Advanced materials.

[9]  Jan D'Haen,et al.  Modeling the temperature induced degradation kinetics of the short circuit current in organic bulk heterojunction solar cells , 2010 .

[10]  Mats Andersson,et al.  Improved performance and life time of inverted organic photovoltaics by using polymer interfacial materials , 2015 .

[11]  W. Su,et al.  Mechanism and control of the structural evolution of a polymer solar cell from a bulk heterojunction to a thermally unstable hierarchical structure. , 2013, Nanoscale.

[12]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[13]  Xiaoniu Yang,et al.  Morphology and Thermal Stability of the Active Layer in Poly(p-phenylenevinylene)/Methanofullerene Plastic Photovoltaic Devices , 2004 .

[14]  Suren A. Gevorgyan,et al.  Stability of Polymer Solar Cells , 2012, Advanced materials.

[15]  D. Bradley,et al.  The Effect of Organic and Metal Oxide Interfacial layers on the Performance of Inverted Organic Photovoltaics , 2013 .

[16]  Menglan Lv,et al.  Self-organization of amine-based cathode interfacial materials in inverted polymer solar cells. , 2014, ACS nano.

[17]  A. Heeger,et al.  A Solution‐Processed MoOx Anode Interlayer for Use within Organic Photovoltaic Devices , 2012 .

[18]  Olle Inganäs,et al.  Enhancing the Photovoltage of Polymer Solar Cells by Using a Modified Cathode , 2007 .

[19]  O. Inganäs,et al.  Sub-glass transition annealing enhances polymer solar cell performance , 2014 .

[20]  Mats Andersson,et al.  Vertical phase separation in spin-coated films of a low bandgap polyfluorene/PCBM blend—Effects of specific substrate interaction , 2007 .

[21]  O. Inganäs,et al.  Fullerene mixtures enhance the thermal stability of a non-crystalline polymer solar cell blend , 2014 .

[22]  Ergang Wang,et al.  Nucleation-limited fullerene crystallisation in a polymer-fullerene bulk-heterojunction blend† , 2013 .

[23]  Chih‐Ping Chen,et al.  High‐Performance and Highly Durable Inverted Organic Photovoltaics Embedding Solution‐Processable Vanadium Oxides as an Interfacial Hole‐Transporting Layer , 2011, Advanced materials.

[24]  F. Huang,et al.  Highly Efficient Inverted Polymer Solar Cells Based on an Alcohol Soluble Fullerene Derivative Interfacial Modification Material , 2012 .

[25]  Talha M. Khan,et al.  A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics , 2012, Science.

[26]  O. Inganäs,et al.  Phase behaviour of liquid-crystalline polymer/fullerene organic photovoltaic blends: thermal stability and miscibility , 2011 .

[27]  Annalisa Bonfiglio,et al.  Influence of thermal ageing on the stability of polymer bulk heterojunction solar cells , 2007 .

[28]  Zhe Li,et al.  Enhancing Fullerene-Based Solar Cell Lifetimes by Addition of a Fullerene Dumbbell** , 2014, Angewandte Chemie.

[29]  C. Müller.  On the Glass Transition of Polymer Semiconductors and Its Impact on Polymer Solar Cell Stability , 2015 .

[30]  Jenny Nelson,et al.  Using Self‐Assembling Dipole Molecules to Improve Charge Collection in Molecular Solar Cells , 2006 .

[31]  J. Park,et al.  Enhanced Performance in Polymer Solar Cells by Surface Energy Control , 2010 .

[32]  Yong Cao,et al.  Enhanced open-circuit voltage in polymer solar cells , 2009 .

[33]  G. Garcia‐Belmonte,et al.  Interplay between fullerene surface coverage and contact selectivity of cathode interfaces in organic solar cells. , 2013, ACS nano.

[34]  F. Gao,et al.  Morphological Control for Highly Efficient Inverted Polymer Solar Cells Via the Backbone Design of Cathode Interlayer Materials , 2014 .

[35]  Etienne Goovaerts,et al.  Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer: fullerene solar cells , 2008 .

[36]  Y. Matsuo,et al.  Mixture of [60] and [70]PCBM giving morphological stability in organic solar cells , 2013 .