Efficiency Drop in Green InGaN/GaN Light Emitting Diodes: The Role of Random Alloy Fluctuations.

White light emitting diodes (LEDs) based on III-nitride InGaN/GaN quantum wells currently offer the highest overall efficiency for solid state lighting applications. Although current phosphor-converted white LEDs have high electricity-to-light conversion efficiencies, it has been recently pointed out that the full potential of solid state lighting could be exploited only by color mixing approaches without employing phosphor-based wavelength conversion. Such an approach requires direct emitting LEDs of different colors, including, in particular, the green-yellow range of the visible spectrum. This range, however, suffers from a systematic drop in efficiency, known as the "green gap," whose physical origin has not been understood completely so far. In this work, we show by atomistic simulations that a consistent part of the green gap in c-plane InGaN/GaN-based light emitting diodes may be attributed to a decrease in the radiative recombination coefficient with increasing indium content due to random fluctuations of the indium concentration naturally present in any InGaN alloy.

[1]  Y. Niquet,et al.  Application of Keating's valence force field model to non-ideal wurtzite materials , 2010 .

[2]  R. Czernecki,et al.  Homogenous indium distribution in InGaN/GaN laser active structure grown by LP-MOCVD on bulk GaN crystal revealed by transmission electron microscopy and x-ray diffraction , 2007, Nanotechnology.

[3]  Aldo Di Carlo,et al.  Elasticity theory of pseudomorphic heterostructures grown on substrates of arbitrary thickness , 2006 .

[4]  S. Karpov,et al.  ABC-model for interpretation of internal quantum efficiency and its droop in III-nitride LEDs: a review , 2014, Numerical Simulation of Optoelectronic Devices, 2014.

[5]  P. N. Keating,et al.  Effect of Invariance Requirements on the Elastic Strain Energy of Crystals with Application to the Diamond Structure , 1966 .

[6]  Y. Niquet,et al.  Band offsets, wells, and barriers at nanoscale semiconductor heterojunctions , 2011, 1106.1088.

[7]  M. Auf der Maur,et al.  It's not easy being green: Strategies for all‐nitrides, all‐colour solid state lighting , 2012 .

[8]  Jerry R. Meyer,et al.  Band parameters for nitrogen-containing semiconductors , 2003 .

[9]  Fabio Beltram,et al.  Empirical spds^* tight-binding calculation for cubic semiconductors : general method and material parameters , 1998 .

[10]  Matthias Auf der Maur,et al.  Multiscale approaches for the simulation of InGaN/GaN LEDs , 2015, Journal of Computational Electronics.

[11]  T. Mukai,et al.  White light emitting diodes with super-high luminous efficacy , 2010 .

[12]  Alessandro Pecchia,et al.  Coupling atomistic and continuous media models for electronic device simulation , 2013, Journal of Computational Electronics.

[13]  Shun Lien Chuang,et al.  k.p method for strained wurtzite semiconductors , 1996 .

[14]  A Pecchia,et al.  The Multiscale Paradigm in Electronic Device Simulation , 2011, IEEE Transactions on Electron Devices.

[15]  Eric A. Stach,et al.  Revisiting the “In-clustering” question in InGaN through the use of aberration-corrected electron microscopy below the knock-on threshold , 2013 .

[16]  J. C. Slater,et al.  Simplified LCAO Method for the Periodic Potential Problem , 1954 .

[17]  S. Karpov,et al.  Optimal ways of colour mixing for high‐quality white‐light LED sources , 2015 .

[18]  R. F. Karlicek,et al.  Toward Smart and Ultra‐efficient Solid‐State Lighting , 2014 .

[19]  Eoin P. O'Reilly,et al.  Atomistic analysis of the impact of alloy and well-width fluctuations on the electronic and optical properties of InGaN/GaN quantum wells , 2015, 1501.05482.

[20]  Takashi Mukai,et al.  P-GaN/N-InGaN/N-GaN Double-Heterostructure Blue-Light-Emitting Diodes , 1993 .

[21]  S. Selberherr.  Analysis and simulation of semiconductor devices , 1984 .

[22]  James S. Speck,et al.  The influence of random indium alloy fluctuations in indium gallium nitride quantum wells on the device behavior , 2014 .

[23]  A. Carlo,et al.  Atomistic simulations of InGaN/GaN random alloy quantum well LEDs , 2014 .

[24]  Eoin P. O'Reilly,et al.  Theory of local electric polarization and its relation to internal strain: Impact on polarization potential and electronic properties of group-III nitrides , 2013, 1309.3309.

[25]  Andrea L. Lacaita,et al.  Quantum-corrected drift-diffusion models for transport in semiconductor devices , 2005 .

[26]  Gilles Lerondel,et al.  Carrier localization in In-rich InGaN/GaN multiple quantum wells for green light-emitting diodes , 2015, Scientific Reports.

[27]  Yoichi Kawakami,et al.  Origin of high oscillator strength in green-emitting InGaN∕GaN nanocolumns , 2006 .

[28]  B. Foreman,et al.  Local Gauge Symmetry in Empirical Tight-Binding Theory , 2001 .

[29]  A. Pecchia,et al.  A comprehensive study of popular eigenvalue methods employed for quantum calculation of energy eigenstates in nanostructures using GPUs , 2015 .

[30]  Ferdinand Scholz,et al.  Wavelength‐dependent determination of the recombination rate coefficients in single‐quantum‐well GaInN/GaN light emitting diodes , 2013 .

[31]  F. Bassani,et al.  Transferable tight-binding parametrization for the group-III nitrides , 2002 .

[32]  C. Humphreys,et al.  Optical and microstructural studies of InGaN∕GaN single-quantum-well structures , 2005 .

[33]  P. Vogl,et al.  A Semi-empirical tight-binding theory of the electronic structure of semiconductors†☆ , 1983 .

[34]  J. Guermond,et al.  Theory and practice of finite elements , 2004 .

[35]  Alfred Cerezo,et al.  Three-dimensional atom probe analysis of green- and blue-emitting InxGa1−xN∕GaN multiple quantum well structures , 2008 .

[36]  Stephan W Koch,et al.  Physics of Optoelectronic Devices , 1995 .

[37]  Robert W. Martin,et al.  Colorimetry and efficiency of white LEDs: Spectral width dependence , 2012 .