Nanoparticle-strengthened Ni2CoCrNb0.2 medium-entropy alloy with an ultrastrong cryogenic yield strength fabricated by additive manufacturing
暂无分享,去创建一个
[1] Zhongwu Zhang,et al. Transition of plastic deformation mechanisms governed by spacing of nano-precipitates in a high entropy alloy , 2022, Scripta Materialia.
[2] Zhiyuan Liu,et al. Strengthening and fracture mechanisms of a precipitation hardening high-entropy alloy fabricated by selective laser melting , 2022, Virtual and Physical Prototyping.
[3] Baode Sun,et al. Effects of V addition on the mechanical properties at elevated temperatures in a γ"-strengthened NiCoCr-based multi-component alloy , 2021, Journal of Materials Science & Technology.
[4] Yi Zhang,et al. Influence of spatial laser beam profiles on thermal-fluid transport during laser-based directed energy deposition , 2021, Virtual and Physical Prototyping.
[5] Haixuan Xu,et al. Temperature-dependent mechanisms of dislocation–twin boundary interactions in Ni-based equiatomic alloys , 2021 .
[6] Y. Chew,et al. Influence of oxides on the cryogenic tensile properties of the laser aided additive manufactured CoCrNi medium entropy alloy , 2021, Composites Part B: Engineering.
[7] Jianzhong Jiang,et al. Novel Co-free high performance TRIP and TWIP medium-entropy alloys at cryogenic temperatures , 2020 .
[8] Y. Chiu,et al. Synergistic deformation pathways in a TWIP steel at cryogenic temperatures: In situ neutron diffraction , 2020 .
[9] Hyoung-Seop Kim,et al. Towards ferrous medium-entropy alloys with low-cost and high-performance , 2020 .
[10] Yan-qing Yang,et al. Co-free non-equilibrium medium-entropy alloy with outstanding tensile properties , 2020 .
[11] Yuan Wu,et al. Evaluation of Pitting Corrosion in Duplex Stainless Steel Fe20Cr9ni for Nuclear Power Application , 2020, Acta Materialia.
[12] Y. C. Wu,et al. A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature , 2020 .
[13] H. Sung,et al. Cryogenic-temperature fracture toughness analysis of non-equi-atomic V10Cr10Fe45Co20Ni15 high-entropy alloy , 2019, Journal of Alloys and Compounds.
[14] L. Gu,et al. Tuning element distribution, structure and properties by composition in high-entropy alloys , 2019, Nature.
[15] D. Raabe,et al. Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures , 2019, Materials Science and Engineering: A.
[16] R. Ritchie,et al. Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures , 2019, Materials Today.
[17] C. Liu,et al. Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy , 2019, Scripta Materialia.
[18] D. Wei,et al. Design of D022 superlattice with superior strengthening effect in high entropy alloys , 2019, Acta Materialia.
[19] C. Kenel,et al. 3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices , 2019, Nature Communications.
[20] P. Liaw,et al. Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures , 2019, Acta Materialia.
[21] Y. Chew,et al. Microstructure and enhanced strength of laser aided additive manufactured CoCrFeNiMn high entropy alloy , 2019, Materials Science and Engineering: A.
[22] P. Liaw,et al. Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures , 2018, Science China Materials.
[23] Jiangwei Wang,et al. Ultrahigh cryogenic strength and exceptional ductility in ultrafine-grained CoCrFeMnNi high-entropy alloy with fully recrystallized structure , 2018, Materials Today Nano.
[24] J. Seol,et al. Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures , 2018, Acta Materialia.
[25] Shu Beng Tor,et al. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review , 2018 .
[26] Junyang He,et al. Stacking fault energy of face-centered-cubic high entropy alloys , 2018 .
[27] Chengsi Zheng,et al. Effect of low-temperature on mechanical behavior for an AISI 304 austenitic stainless steel , 2018 .
[28] Ji-Jung Kai,et al. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy , 2017 .
[29] H. Kim,et al. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy , 2017, Nature Communications.
[30] E. George,et al. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi , 2017 .
[31] C. Liu,et al. The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys , 2017 .
[32] G. Eggeler,et al. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy , 2016 .
[33] Yong Zhang,et al. The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures , 2016 .
[34] Bernd Gludovatz,et al. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures , 2016, Nature Communications.
[35] N. Tsuji,et al. Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes , 2015, Scientific Reports.
[36] Nack J. Kim,et al. Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels , 2015 .
[37] D. Raabe,et al. The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation , 2015 .
[38] G. Pharr,et al. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures , 2014 .
[39] R. Ritchie,et al. A fracture-resistant high-entropy alloy for cryogenic applications , 2014, Science.
[40] G. Eggeler,et al. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy , 2013 .
[41] C. Koch,et al. Ultrastrong Mg Alloy via Nano-spaced Stacking Faults , 2013 .
[42] D. Raabe,et al. Multistage strain hardening through dislocation substructure and twinning in a high strength and duc , 2012 .
[43] K. Kurzydłowski,et al. Low temperature mechanical properties of 316L type stainless steel after hydrostatic extrusion , 2011 .
[44] D. Raabe,et al. Dislocation and twin substructure evolution during strain hardening of an Fe-22 wt.% Mn-0.6 wt.% C TWIP steel observed by electron channeling contrast imaging , 2011 .
[45] V. Kuokkala,et al. Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate , 2010 .
[46] K. Lu,et al. Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale , 2009, Science.
[47] L. Murr,et al. Microbands and shear-related microstructural phenomena associated with impact craters in 6061-T6 aluminum , 1996 .
[48] Srikumar Banerjee,et al. Deformation behaviour of γ″ strengthened inconel 718 , 1988 .
[49] Y. Estrin,et al. Twinning-induced plasticity (TWIP) steels , 2018 .
[50] D. S. Duvall,et al. An estimate of the strengthening arising from coherent, tetragonally-distorted particles , 1974 .
[51] F. Frank,et al. On deformation by twinning , 1955 .
[52] Young-kyun Kim,et al. 1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion , 2022 .