Numerical and intelligent modeling of triaxial strength of anisotropic jointed rock specimens

The strength of anisotropic rock masses can be evaluated through either theoretical or experimental methods. The latter is more precise but also more expensive and time-consuming especially due to difficulties of preparing high-quality samples. Numerical methods, such as finite element method (FEM), finite difference method (FDM), distinct element method (DEM), etc. have been regarded as precise and low-cost theoretical approaches in different fields of rock engineering. On the other hand, applicability of intelligent approaches such as fuzzy systems, neural networks and decision trees in rock mechanics problems has been recognized through numerous published papers. In current study, it is aimed to theoretically evaluate the strength of anisotropic rocks with through-going discontinuity using numerical and intelligent methods. In order to do this, first, strength data of such rocks are collected from the literature. Then FlAC, a commercially well-known software for FDM analysis, is applied to simulate the situation of triaxial test on anisotropic jointed specimens. Reliability of this simulation in predicting the strength of jointed specimens has been verified by previous researches. Therefore, the few gaps of the experimental data are filled by numerical simulation to prevent unexpected learning errors. Furthermore, a sensitivity analysis is carried out based on the numerical process applied herein. Finally, two intelligent methods namely feed forward neural network and a newly developed fuzzy modeling approach are utilized to predict the strength of above-mentioned specimens. Comparison of the results with experimental data demonstrates that the intelligent models result in desirable prediction accuracy.

[1]  D. Mishra,et al.  Estimation of uniaxial compressive strength of rock materials by index tests using regression analysis and fuzzy inference system , 2013 .

[2]  Gali Madhavi Latha,et al.  Elasto-plastic analysis of jointed rocks using discrete continuum and equivalent continuum approaches , 2012 .

[3]  Robert J. Schalkoff,et al.  Artificial neural networks , 1997 .

[4]  T. Ramamurthy,et al.  Strength and deformation behaviour of sandstones , 1984 .

[5]  P. Attewell,et al.  Intrinsic shear strength of a brittle, anisotropic rock — III: Textural interpretation of failure , 1974 .

[6]  P. Attewell,et al.  INTRINSIC SHEAR STRENGTH OF A BRITTLE, ANISOTROPIC ROCK- EXPERIMENTAL AND MECHANICAL INTERPRETATION , 1974 .

[7]  N. Shimizu,et al.  Practical equivalent continuum characterization of jointed rock masses , 2001 .

[8]  Candan Gokceoglu,et al.  A neuro-fuzzy model for modulus of deformation of jointed rock masses , 2004 .

[9]  Cyril Goutte,et al.  Note on Free Lunches and Cross-Validation , 1997, Neural Computation.

[10]  Li Hai-Ning,et al.  Fuzzy system models (FSMs) for analysis of rock mass displacement caused by underground mining in soft rock strata , 2009, Expert Syst. Appl..

[11]  Ming Chuan Kuo,et al.  A failure criterion for transversely isotropic rocks , 2001 .

[12]  F. Kalantary,et al.  An investigation on the Su–NSPT correlation using GMDH type neural networks and genetic algorithms , 2009 .

[13]  Mojtaba Asadi,et al.  Evaluating the strength of intact rocks through genetic programming , 2011, Appl. Soft Comput..

[14]  Evert Hoek,et al.  HOEK-BROWN FAILURE CRITERION - 2002 EDITION , 2002 .

[15]  Ebru Akcapinar Sezer,et al.  Modeling of the uniaxial compressive strength of some clay-bearing rocks using neural network , 2011, Appl. Soft Comput..

[16]  Xu Han,et al.  Neural identification of rock parameters using fuzzy adaptive learning parameters , 2003 .

[17]  Jyh-Shing Roger Jang,et al.  ANFIS: adaptive-network-based fuzzy inference system , 1993, IEEE Trans. Syst. Man Cybern..

[18]  John A. Hudson,et al.  Comprehensive rock engineering , 1993 .

[19]  Yong-Ming Tien,et al.  Preparation and mechanical properties of artificial transversely isotropic rock , 2000 .

[20]  T. Ramamurthy,et al.  Strength predictions for jointed rocks in confined and unconfined states , 1994 .

[21]  Mojtaba Asadi,et al.  Development of optimal fuzzy models for predicting the strength of intact rocks , 2013, Comput. Geosci..

[22]  David H. Wolpert,et al.  On Bias Plus Variance , 1997, Neural Computation.

[23]  Zenon Mróz,et al.  On failure criteria for anisotropic cohesive‐frictional materials , 2001 .

[24]  Mingqing You.  Strength criterion for rocks under compressive-tensile stresses and its application , 2015 .

[25]  J. P. Henry,et al.  Laboratory investigation of the mechanical behaviour of Tournemire shale , 1997 .

[26]  P. Attewell,et al.  Intrinsic shear strength of a brittle, anisotropic rock — II: Textural data acquisition and processing , 1974 .

[27]  K. Gray,et al.  The Mechanical Behavior of Anisotropic Sedimentary Rocks , 1967 .