Improvement of microstructure homogenous and tensile properties of powder hot isostatic pressed TA15 titanium alloy via heat treatment

[1]  Xinfang Zhang,et al.  Removing prior particle boundaries in a powder superalloy based on the interaction between pulsed electric current and chain-like structure , 2021 .

[2]  A. Mazilkin,et al.  Effect of composition, annealing temperature, and high pressure torsion on structure and hardness of Ti–V and Ti–V–Al alloys , 2019, Journal of Applied Physics.

[3]  Moataz M. Attallah,et al.  Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing , 2017 .

[4]  Pankaj Kumar,et al.  Strength–Ductility Property Maps of Powder Metallurgy (PM) Ti-6Al-4V Alloy: A Critical Review of Processing-Structure-Property Relationships , 2017, Metallurgical and Materials Transactions A.

[5]  He Yang,et al.  A unified growth model of the secondary grain boundary α phase in TA15 Ti-alloy , 2016 .

[6]  Bo Song,et al.  Effect of hot isostatic pressing procedure on performance of Ti6Al4V: Surface qualities, microstructure and mechanical properties , 2016 .

[7]  He Yang,et al.  Tri-modal microstructure in high temperature toughening and low temperature strengthening treatments of near-β forged TA15 Ti-alloy , 2016 .

[8]  Y. Ivanisenko,et al.  Phase Transformations in Ti–Fe Alloys Induced by High‐Pressure Torsion , 2015 .

[9]  Sung Ho Lee,et al.  Microstructure and intermediate-temperature mechanical properties of powder metallurgy Ti–6Al–4V alloy prepared by the prealloyed approach , 2015 .

[10]  Rui Yang,et al.  Effect of Hot Isostatic Pressing Conditions and Cooling Rate on Microstructure and Properties of Ti-6Al-4V Alloy from Atomized Powder , 2014 .

[11]  Xinhua Wu,et al.  Influence of heat treatment on microstructure and tensile behavior of a hot isostatically pressed nickel-based superalloy , 2013 .

[12]  Yang He,et al.  Nucleation and growth mechanism of α-lamellae of Ti alloy TA15 cooling from an α + β phase field , 2013 .

[13]  M. Fu,et al.  Recrystallization of the hot isostatic pressed nickel-base superalloy FGH4096. II: Characterization and application , 2012 .

[14]  A. Huang,et al.  Microstructures and tensile properties of hot isostatic pressed Ti4522XD powders , 2012 .

[15]  He Yang,et al.  Microstructure evolution of the transitional region in isothermal local loading of TA15 titanium alloy , 2011 .

[16]  Xinhua Wu,et al.  Effect of Hot-Isostatic-Pressing Parameters on the Microstructure and Properties of Powder Ti-6Al-4V Hot-Isostatically-Pressed Samples , 2010 .