The feasibility of printing polylactic acid–nanohydroxyapatite composites using a low‐cost fused deposition modeling 3D printer

The current “gold standard” to treat bone lesions is allografts and autografts, both presenting important disadvantages such as risk of infection and morbidity. Synthetic grafts and scaffolds for bone regeneration represent a promising solution. Fused deposition modeling is a valid tool for developing synthetic bone grafts of complex shapes, which is a key issue. The possibility of building polylactic acid–nanohydroxyapatite (PLA/nanoHA) composites by 3D printing was systematically evaluated. PLA/nanoHA filaments for low-cost 3D printers were produced by a multistep solvent-free procedure and characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry, and rheometry. TGA analysis confirmed the presence of the nanoHA amounts used in the composites, equal to 5 and 15 wt %. The glass-transition temperature and degree of crystallinity of PLA are not influenced by presence of nanoHA, which remains substantially amorphous. The morphological analysis and compression testing on printed samples showed that nanoHA was uniformly dispersed within the PLA matrix and improved the PLA mechanical properties without changing the rheological performance. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 134, 44656.

[1]  Carola Esposito Corcione,et al.  Development and characterization of UV curable epoxy/hydroxyapatite suspensions for stereolithography applied to bone tissue engineering , 2014 .

[2]  P. Törmälä,et al.  Surgical applications of biodegradable polymers in human tissues , 1989 .

[3]  Brendon M. Baker,et al.  Rapid casting of patterned vascular networks for perfusable engineered 3D tissues , 2012, Nature materials.

[4]  C. E. Corcione.  Development and characterization of novel photopolymerizable formulations for stereolithography , 2014 .

[5]  S. Hsu,et al.  Evaluation of chondrocyte growth in the highly porous scaffolds made by fused deposition manufacturing (FDM) filled with type II collagen , 2009, Biomedical microdevices.

[6]  C. E. Corcione,et al.  Organically modified montmorillonite polymer nanocomposites for stereolithography building process , 2015 .

[7]  Ji-Hoon Bae,et al.  Combination therapy with BMP-2 and BMSCs enhances bone healing efficacy of PCL scaffold fabricated using the 3D plotting system in a large segmental defect model , 2012, Biotechnology Letters.

[8]  J. Urry,et al.  3D, SF and the future , 2013 .

[9]  D. Cho,et al.  Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system , 2012 .

[10]  Ryan B. Wicker,et al.  Fused deposition modeling of patient‐specific polymethylmethacrylate implants , 2010 .

[11]  S. Gogolewski,et al.  Effect of in vivo and in vitro degradation on molecular and mechanical properties of various low-molecular-weight polylactides. , 1997, Journal of biomedical materials research.

[12]  Y. Shikinami,et al.  Bioresorbable devices made of forged composites of hydroxyapatite (HA) particles and poly-L-lactide (PLLA): Part I. Basic characteristics. , 1999, Biomaterials.

[13]  Antonio Greco,et al.  Temperature evolution during stereolithography building with a commercial epoxy resin , 2006 .

[14]  C. E. Corcione,et al.  Laser stereolithography of ZrO 2 toughened Al 2 O 3 , 2004 .

[15]  Huan Zhou,et al.  Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: a review. , 2012, Acta biomaterialia.

[16]  F. Cui,et al.  Hierarchically biomimetic bone scaffold materials: nano-HA/collagen/PLA composite. , 2004, Journal of biomedical materials research. Part B, Applied biomaterials.

[17]  Jukka Seppälä,et al.  Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling. , 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

[18]  H. Losken,et al.  Experimental studies of DL-polylactic acid biodegradable plates and screws in rabbits: computed tomography and molecular weight loss. , 1993, The Journal of craniofacial surgery.

[19]  A. Bandyopadhyay,et al.  Bone tissue engineering using 3D printing , 2013 .

[20]  C. E. Corcione,et al.  Laser stereolithography of ZrO2 toughened Al2O3 , 2004 .

[21]  W. Bonfield,et al.  Morphology and ultrastructure of the interface between hydroxyapatite-polyhydroxybutyrate composite implant and bone , 1997, Journal of materials science. Materials in medicine.

[22]  Jogender Singh,et al.  Review Nano and macro-structured component fabrication by electron beam-physical vapor deposition (EB-PVD) , 2005 .

[23]  J. Kenny,et al.  Degradation behaviour of a composite material for thermal protection systems Part I–Experimental characterization , 1998 .

[24]  Qing Gao,et al.  3D Printing Surgical Implants at the clinic: A Experimental Study on Anterior Cruciate Ligament Reconstruction , 2016, Scientific Reports.

[25]  Benjamin M Wu,et al.  Recent advances in 3D printing of biomaterials , 2015, Journal of Biological Engineering.

[26]  Jinku Kim,et al.  Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model , 2012, Biofabrication.

[27]  Jung-Woog Shin,et al.  Scaffolds for bone tissue engineering fabricated from two different materials by the rapid prototyping technique: PCL versus PLGA , 2012, Journal of Materials Science: Materials in Medicine.

[28]  Mariaenrica Frigione,et al.  Influence of stone particles on the rheological behavior of a novel photopolymerizable siloxane‐modified acrylic resin , 2011 .

[29]  H. M. Nielsen,et al.  Three-dimensional printing of drug-eluting implants: preparation of an antimicrobial polylactide feedstock material. , 2015, Journal of pharmaceutical sciences.

[30]  Carola Esposito Corcione,et al.  Free form fabrication of silica moulds for aluminium casting by stereolithography , 2006 .

[31]  C. E. Corcione,et al.  Synthesis and characterization of clay-nanocomposite solvent-based polyurethane adhesives , 2008 .

[32]  Christian J. Petropolis,et al.  Accuracy of medical models made by consumer-grade fused deposition modelling printers , 2015, Plastic surgery.

[33]  A. Sannino,et al.  Influence of the calcination temperature on morphological and mechanical properties of highly porous hydroxyapatite scaffolds , 2013 .

[34]  P. Rokkanen.  Absorbable materials in orthopaedic surgery. , 1991, Annals of medicine.

[35]  Marinella Levi,et al.  Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling , 2015 .

[36]  Raphael Olszewski,et al.  Experimental Validation of Plastic Mandible Models Produced by a “Low-Cost” 3-Dimensional Fused Deposition Modeling Printer , 2016, Medical science monitor : international medical journal of experimental and clinical research.

[37]  Hideki Yoshikawa,et al.  Potentiation of the activity of bone morphogenetic protein-2 in bone regeneration by a PLA-PEG/hydroxyapatite composite. , 2005, Biomaterials.

[38]  C. E. Corcione,et al.  Photopolymerization kinetics of an epoxy‐based resin for stereolithography , 2004 .

[39]  Dong-Woo Cho,et al.  Blended PCL/PLGA scaffold fabrication using multi-head deposition system , 2009 .