A numerical approximation to the elastic properties of sphere-reinforced composites

Abstract Three-dimensional cubic unit cells containing 30 non-overlapping identical spheres randomly distributed were generated using a new, modified random sequential adsortion algorithm suitable for particle volume fractions of up to 50%. The elastic constants of the ensemble of spheres embedded in a continuous and isotropic elastic matrix were computed through the finite element analysis of the three-dimensional periodic unit cells, whose size was chosen as a compromise between the minimum size required to obtain accurate results in the statistical sense and the maximum one imposed by the computational cost. Three types of materials were studied: rigid spheres and spherical voids in an elastic matrix and a typical composite made up of glass spheres in an epoxy resin. The moduli obtained for different unit cells showed very little scatter, and the average values obtained from the analysis of four unit cells could be considered very close to the “exact” solution to the problem, in agreement with the results of Drugan and Willis (J. Mech. Phys. Solids 44 (1996) 497) referring to the size of the representative volume element for elastic composites. They were used to assess the accuracy of three classical analytical models: the Mori–Tanaka mean-field analysis, the generalized self-consistent method, and Torquato's third-order approximation.

[1]  J. D. Eshelby.  The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[2]  Graeme W. Milton,et al.  Bounds on the elastic and transport properties of two-component composites , 1982 .

[3]  Helmut J. Böhm,et al.  Comparisons between three-dimensional and two-dimensional multi-particle unit cell models for particle reinforced metal matrix composites , 2001 .

[4]  J. D. Eshelby,et al.  The elastic field outside an ellipsoidal inclusion , 1959, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[5]  S. Shtrikman,et al.  A variational approach to the theory of the elastic behaviour of multiphase materials , 1963 .

[6]  Andrei A. Gusev,et al.  Fiber packing and elastic properties of a transversely random unidirectional glass/epoxy composite , 2000 .

[7]  R. Pyrz.  Correlation of Microstructure Variability and Local Stress Field in Two-Phase Materials , 1994 .

[8]  Rintoul,et al.  Reconstruction of the Structure of Dispersions , 1997, Journal of colloid and interface science.

[9]  W. Drugan,et al.  A micromechanics-based nonlocal constitutive equation and estimates of representative volume element size for elastic composites , 1996 .

[10]  N. Phan-Thien,et al.  New bounds on effective elastic moduli of two-component materials , 1982, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[11]  M. Beran,et al.  Use of classical variational principles to determine bounds for the effective bulk modulus in heterogeneous media , 1966 .

[12]  Christian Huet,et al.  Application of variational concepts to size effects in elastic heterogeneous bodies , 1990 .

[13]  R. Hill.  A self-consistent mechanics of composite materials , 1965 .

[14]  Salvatore Torquato,et al.  Effective stiffness tensor of composite media : II. Applications to isotropic dispersions , 1998 .

[15]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[16]  Jerome K. Percus,et al.  Analysis of Classical Statistical Mechanics by Means of Collective Coordinates , 1958 .

[17]  J. Michel,et al.  Effective properties of composite materials with periodic microstructure : a computational approach , 1999 .

[18]  A. A. Gusev.  Representative volume element size for elastic composites: A numerical study , 1997 .

[19]  Salvatore Torquato,et al.  Random Heterogeneous Media: Microstructure and Improved Bounds on Effective Properties , 1991 .

[20]  R. Mclaughlin.  A study of the differential scheme for composite materials , 1977 .

[21]  Y. Benveniste,et al.  A new approach to the application of Mori-Tanaka's theory in composite materials , 1987 .

[22]  Christian Huet,et al.  Order relationships for boundary conditions effect in heterogeneous bodies smaller than the representative volume , 1994 .

[23]  W. Drugan.  Micromechanics-based variational estimates for a higher-order nonlocal constitutive equation and optimal choice of effective moduli for elastic composites , 2000 .