NANO-BATTERY TECHNOLOGY FOR EV-HEV PANEL: A PIONEERING STUDY

Global trends toward CO2 reduction and resource efficiency have significantly increased the importance of lightweight materials for automobile original equipment manufacturers (OEM). CO2 reduction is a fundamental driver for a more lightweight automobile. The introduction of Electrical Vehicles (EVs) is one initiative towards this end. However EVs are currently facing several weaknesses: limited driving range, battery pack heaviness, lack of safety and thermal control, high cost, and overall limited efficiency. This study presents a panel-style nano-battery technology built into an EV with CuO filler solid polymer electrolyte (SPE) sandwiched by carbon fiber (CF) and lithium (Li) plate. In addition to this, an aluminum laminated polypropylene film is used as the electromagnetic compatibility (EMC) shield. The proposed battery body panel of the EV would reduce the car weight by about 20%, with a charge and discharge capacity of 1.5 kWh (10% of car total power requirement), and provide the heat insulation for the car which would save about 10% power consumption of the air conditioning system. Therefore, the EV would be benefited by 30% in terms of energy reduction by using the proposed body. Furthermore, the proposed body is considered environmental-friendly since it is recyclable for use in a new product. However, the main limiting factors of the SPE are its thermal behavior and moderate ionic conductivity at low temperatures. The SPE temperature is maintained by controlling the battery panel charging/discharge rate. It is expected that the proposed panel-style nano-battery use in an EV would save up to 6.00 kWh in battery energy, equivalent to 2.81 liters of petrol and prevent 3.081 kg of CO2 emission for a travel distance of 100 km. KEYWORDS: epoxy resin; carbon fiber; lithium thin plate; energy generation; solid electrolyte battery

[1]  Soshu Kirihara,et al.  Enhanced thermal conductivity of polymer composites filled with three-dimensional brushlike AlN nanowhiskers , 2009 .

[2]  Eric D. Wetzel,et al.  Multifunctional Power-Generating and Energy-Storing Structural Composites for U. S. Army Applications (Invited Paper) , 2004 .

[3]  C. Nan,et al.  Thermal, electrical and mechanical properties of plasticized polymer electrolytes based on PEO/P(VDF-HFP) blends , 2002 .

[4]  S. Hsu,et al.  Enhanced thermal conductivity of polyimide films via a hybrid of micro- and nano-sized boron nitride. , 2010, The journal of physical chemistry. B.

[5]  C. Dalmolin,et al.  Electrochemical and physical properties of poly(acrylonitrile)/poly(vinyl acetate)-based gel electrolytes for lithium ion batteries , 2007 .

[6]  Nobuyuki Imanishi,et al.  Charge‐Discharge Characteristics of Mesophase‐Pitch‐Based Carbon Fibers for Lithium Cells , 1993 .

[7]  P. Xiao,et al.  Thermal conductivities of YSZ/Al2O3 composites , 2010 .

[8]  Raouf O. Loutfy,et al.  Overcharge studies of carbon fiber composite-based lithium-ion cells , 2006 .

[9]  Lynette W. Cheah,et al.  Cars on a diet : the material and energy impacts of passenger vehicle weight reduction in the U.S. , 2010 .

[10]  B. Simon,et al.  Carbon materials for lithium-ion rechargeable batteries , 1999 .

[11]  Ataur Rahman,et al.  Fuzzy knowledge-based model for prediction of traction force of an electric golf car , 2012 .

[12]  W. Gacitúa,et al.  POLYMER NANOCOMPOSITES: SYNTHETIC AND NATURAL FILLERS A REVIEW , 2005 .

[13]  Elena Sherman,et al.  Design and fabrication of multifunctional structural batteries , 2009 .

[14]  Yiu-Wing Mai,et al.  Improving thermal conductivity while retaining high electrical resistivity of epoxy composites by incorporating silica-coated multi-walled carbon nanotubes , 2011 .

[15]  A. Fina,et al.  Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review , 2011 .

[16]  James P. Thomas,et al.  Mechanical design and performance of composite multifunctional materials , 2004 .